Download or read book Design of Fiberglass reinforced Plastic FRP Stacks written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASCE/SEI Standard 52-10 applies to fiberglass-reinforced plastic (FRP) stacks-those stacks where the primary supporting shell is made of FRP. Design of Fiberglass-Reinforced Plastic (FRP) Stacks outlines the considerations that must be made for both the mechanical and structural design; emphasizes what consideration must be taken for wind-and seismic-induced vibrations; gives guidelines for ultraviolet protection and selection of materials; states the requirements for lighting and lightning protection based upon existing building and federal codes; gives the requirements for climbing and access based upon current Occupational Safety and Health Administration (OSHA) standards; emphasizes the important areas regarding fabrication and construction; and outlines areas requiring maintenance and inspection following initial operation.
Download or read book Design of Fiberglass Reinforced Plastic FRP Stacks ASCE SEI 52 10 Definitions and Materials Chapter 2 Mechanical Design Chapter 3 Structural Design Chapter 4 Vibration Chapter 5 Access Safety and Electrical Chapter 6 Fabrication and Erection Chapter 7 Inspection and Maintenance Further Reading written by American Society of Civil Engineers and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard outlines the important mechanical and structural engineering considerations for stacks where the primary supporting shell is made of FRP. Topics include: considerations pertaining to wind and seismic-induced vibrations; guidelines for the ultraviolet protection and selection of materials; requirements for lighting and lightning protection based upon existing building and federal codes; requirements for climbing and access based upon current Occupational Safety and Health Administration (OSHA) standards; the important areas regarding fabrication and construction; and maintenance and inspection following initial operation.
Download or read book Fiber Reinforced Polymer FRP Composites for Infrastructure Applications written by Ravi Jain and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines current issues of fiber reinforced polymer (FRP) composites in civil infrastructure. The contents of this book are divided into two parts. The first part engages topics related to durability and service life of FRP composites and how they contribute to sustainability. The second part highlights implementation and applications of the FRP composites with an emphasis on bridge structures. An introductory chapter provides an overview of FRP composites and its role in a sustainable built environment highlighting the issues of durability and service life followed by a current review of sustainability in infrastructure design.
Download or read book Developments in fiber reinforced polymer FRP composites for civil engineering written by N. Uddin and published by Elsevier Inc. Chapters. This book was released on 2013-05-15 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: The primary objective of this chapter is first to introduce and demonstrate the application of thermoplastic (woven glass reinforced polypropylene) in the design of modular fiber-reinforced bridge decks, and next the development of jackets for confining concrete columns against compression and impact loading. The design concept and manufacturing processes of the thermoplastic bridge deck composite structural system are presented by recognizing the structural demands required to support highway traffic. Then the results of the small-scale static cylinder tests and the impact tests of concrete columns are presented, demonstrating that thermoplastic reinforcement jackets act to restrain the lateral expansion of the concrete that accompanies the onset of crushing, maintaining the integrity of the core concrete, and enabling much higher compression strains (compared to CFRP composite wraps) to be sustained by the compression zone before failure occurs.
Download or read book Developments in fiber reinforced polymer FRP composites for civil engineering written by P. Qiao and published by Elsevier Inc. Chapters. This book was released on 2013-05-15 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter presents a systematic approach for material characterization, analysis, and design of all-fiber-reinforced polymer or plastic (FRP) composite structures. The suggested ‘bottom-up’ analysis concept is applied throughout the procedure, from materials/microstructures, to macro components, to structural members, and finally to structural systems, thus providing a systematic analysis methodology for all-FRP composite structures. The systematic approach described in this chapter can be used efficiently to analyze and design FRP shapes and bridge systems and also develop new design concepts for all composite structures.
Download or read book Strengthening of Concrete Structures Using Fiber Reinforced Polymers FRP written by Hwai-Chung Wu and published by Woodhead Publishing. This book was released on 2017-02-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP): Design, Construction and Practical Applications presents a best practice guide on the structural design and strengthening of bridge structures using advanced Fiber Reinforced Polymer (FRP) composites. The book briefly covers the basic concepts of FRP materials and composite mechanics, while focusing on practical design and construction issues, including inspection and quality control, paying special attention to the differences in various design codes (US, Japan, and Europe) and recommendations. At present, several design guides from the US, Japan, and Europe are available. These guidelines are often inconsistent and do not cover all necessary design and inspection issues to the same degree of detail. This book provides a critical review and comparison of these guidelines, and then puts forward best practice recommendations, filling a significant gap in the literature, and serving as an important resource for engineers, architects, academics, and students interested in FRP materials and their structural applications. Written from a practitioner's point-of-view, it is a valuable design book for structural engineers all over the world. Includes a large quantity of design examples and structural software to facilitate learning and help readers perform routine design Provides recommendations for best practices in design and construction for the strengthening of bridge structures using advanced fiber-reinforced polymer (FRP) composites Presents comprehensive guidelines on design, inspection, and quality control, including laboratory and field testing information
Download or read book Analysis for Design of Fiber Reinforced Plastic Vessels written by Suong V. Hoa and published by CRC Press. This book was released on 1991-09-30 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Reinforced Plastic FRP Reinforcement for Concrete Structures written by David A. Hensher and published by Elsevier. This book was released on 2016-01-22 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber reinforced plastic (FRP) composites for prestressed and non-prestressed concrete reinforcement has developed into a technology with serious and substantial claims for the advancement of construction materials and methods. Research and development is now occurring worldwide. The 20 papers in this volume make a further contribution in advancing knowledge and acceptance of FRP composites for concrete reinforcement. The articles are divided into three parts. Part I introduces FRP reinforcement for concrete structures and describes general material properties and manufacturing methods. Part II covers a three-continent perspective of current R&D, design and code implementations, and technical organizations' activities. Part III presents an in-depth description of commercially-available products, construction methods, and applications. The work is intended for engineers, researchers, and developers with the objective of presenting them with a world-wide cross-section of initiatives, representative products and significant applications.
Download or read book Developments in fiber reinforced polymer FRP composites for civil engineering written by N. Uddin and published by Elsevier Inc. Chapters. This book was released on 2013-05-15 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter discusses design for fiber-reinforced polymer (FRP)/autoclaved aerated concrete (AAC) sandwich panels for structural applications. The chapter first presents the finite element analysis (FE) of FRP/AAC panels. The FE results are compared with the experimental results showing acceptable agreement. Next, analytical models are presented to predict the deflection and strength of the panels. Finally, design graphs have been developed to help in designing the floor and wall panels made from FRP/AAC panels. Also, those panels have been compared to the commercially used reinforced AAC panels demonstrating that FRP/AAC panels offer a relatively cost-effective solution for longer life cycle.
Download or read book Developments in fiber reinforced polymer FRP composites for civil engineering written by R. Liang and published by Elsevier Inc. Chapters. This book was released on 2013-05-15 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter presents dozens of select environmental engineering applications of fiber-reinforced polymer (FRP) composite materials with emphasis on their environmental benefits, followed by discussions on durability of composites. Significance of design codes and specifications in promoting and advancing the applications of FRP composites is addressed. With ever increasing attention toward a sustainable built environment, FRP composites have potential to be selected as a material of choice because of the performance and design advantages of FRPs.
Download or read book Developments in Fiber Reinforced Polymer FRP Composites for Civil Engineering written by Nasim Uddin and published by Elsevier. This book was released on 2013-05-15 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber-reinforced polymer (FRP) composite materials has had a dramatic impact on civil engineering techniques over the past three decades. FRPs are an ideal material for structural applications where high strength-to-weight and stiffness-to-weight ratios are required. Developments in fiber-reinforced polymer (FRP) composites for civil engineering outlines the latest developments in fiber-reinforced polymer (FRP) composites and their applications in civil engineering. Part one outlines the general developments of fiber-reinforced polymer (FRP) use, reviewing recent advancements in the design and processing techniques of composite materials. Part two outlines particular types of fiber-reinforced polymers and covers their use in a wide range of civil engineering and structural applications, including their use in disaster-resistant buildings, strengthening steel structures and bridge superstructures. With its distinguished editor and international team of contributors, Developments in fiber-reinforced polymer (FRP) composites for civil engineering is an essential text for researchers and engineers in the field of civil engineering and industries such as bridge and building construction. Outlines the latest developments in fiber-reinforced polymer composites and their applications in civil engineering Reviews recent advancements in the design and processing techniques of composite materials Covers the use of particular types of fiber-reinforced polymers in a wide range of civil engineering and structural applications
Download or read book Developments in Fiber reinforced Polymer FRP Composites for Civil Engineering written by Nasim Uddin and published by Woodhead Pub Limited. This book was released on 2013 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber-reinforced polymer (FRP) composite materials has had a dramatic impact on civil engineering techniques over the past three decades. FRPs are an ideal material for structural applications where high strength-to-weight and stiffness-to-weight ratios are required. Developments in fiber-reinforced polymer (FRP) composites for civil engineering outlines the latest developments in fiber-reinforced polymer (FRP) composites and their applications in civil engineering. Part one outlines the general developments of fiber-reinforced polymer (FRP) use, reviewing recent advancements in the design and processing techniques of composite materials. Part two outlines particular types of fiber-reinforced polymers and covers their use in a wide range of civil engineering and structural applications, including their use in disaster-resistant buildings, strengthening steel structures and bridge superstructures. With its distinguished editor and international team of contributors, Developments in fiber-reinforced polymer (FRP) composites for civil engineering is an essential text for researchers and engineers in the field of civil engineering and industries such as bridge and building construction. Outlines the latest developments in fiber-reinforced polymer composites and their applications in civil engineering Reviews recent advancements in the design and processing techniques of composite materials Covers the use of particular types of fiber-reinforced polymers in a wide range of civil engineering and structural applications
Download or read book Recommended Practice for Fiber reinforced Polymer Products for Overhead Utility Line Structures written by Task Committee on Fiber-reinforced Polymer Products for Overhead Utility Line Structures and published by . This book was released on 2019 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: "MOP 104, Second Edition, provides updated best practices and design recommendations for the use of fiber-reinforced polymer (FRP) composite poles and cross-arms in conductor support applications"--
Download or read book FRP Composites for Reinforced and Prestressed Concrete Structures written by Perumalsamy Balaguru and published by CRC Press. This book was released on 2008-11-05 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a nu
Download or read book Design Guide for FRP Composite Connections written by Ayman S. Mosallam and published by Amer Society of Civil Engineers. This book was released on 2011 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Construction Institute of ASCE. This Manual of Practice covers major issues related to the analysis and design of composite joints and frame connections manufactured from fiber-reinforced polymer (FRP) composites in general and pultruded (PFRP) composites in particular. Topics include: design philosophy and design considerations for structural composite members and connections; basic information and research and development work on the mechanics of fasteners and bolted composite joints; analysis and design methods for bolted composite joints; basic physical and mechanical information on structural adhesives and bonded composite joints; analysis and design methods for bonded composite joints; structural performance combined (bolted/bonded) joints; basic information and research and development related to PFRP framing connections; analysis and design methods for PFRP framing connections; and numerical analysis review of available finite element codes suitable for modeling and designing composite frame structures. MOP 102 addresses issues that are lacking in other national and international standards, design manuals, and technical publications. It will be valuable to structural engineers designing with FRP or PFRP composites.
Download or read book Design of FRP and Steel Plated RC Structures written by Deric Oehlers and published by Elsevier. This book was released on 2004-09-11 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are a large and ever-increasing number of structures and buildings worldwide that are in need of refurbishment, rehabilitation and strengthening. The retrofitting of beams and slabs for this purpose is now recognized as the most cost-effective and environmentally sustainable method of carrying out this essential renovation work. The authors of Design of FRP and Steel Plated RC Structures are both acknowledged world experts on these techniques and their book has been designed to provide the reader with a comprehensive overview of the established techniques and their applications as well as thorough coverage of newly emerging methodologies and their uses. The comparison of FRP and steel is a particular focus and the authors provide practical examples of where one material might be used in preference to another. Indeed practical, worked examples of how, when, and why specific solutions have been chosen in real-world situations are used throughout the text and provide the user with invaluable insights into the decision-making process and its technical background. Just as importantly these examples make the understanding and application of these techniques easier to understand for the student and the practitioner. The book is international in appeal, as while no reference is made to specific local codes the authors’ approach always follows that of the more advanced structural codes worldwide. As such it will remain an essential resource for many years to come. Design of FRP and Steel Plated RC Structures is an important reference for a broad range of researchers, students and practitioners including civil engineers and contractors, architects, designers and builders. Contains detailed worked examples throughout to aid understanding and provide technical insight Covers all types of metal plates and all types of FRP plates Uses design philosophies that can be used with any mathematical model Provides coverage of all main international guidelines
Download or read book LOAD AND RESISTANCE FACTOR DESIGN LRFD FOR PULTRUDED FIBER REINFORCED POLYMER FRP written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
