Download or read book Design of Fastenings for Use in Concrete written by Rainer Mallée and published by John Wiley & Sons. This book was released on 2013-04-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European pre-standard CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels as well as post-installed mechanical and chemical anchors is ready for use. The background and interpretation of the provisions related to the determination of actions and resistances based on limit state design, durability, fire resistance, fatigue and earthquake actions as required by CEN/TS 1992 are described in detail. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Design of Fastenings for Use in Concrete Headed Fasteners written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Screws (bolts), Bolts
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.
Download or read book Fastenings to Concrete and Masonry Structures written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern fastening techniques are increasingly being used to transfer loads into concrete and masonry structures. This book aims to compile and compare research on the behaviour of fastening systems. It also proposes an approach to the design of fastenings based on empirical and theoretical models.
Download or read book Design of fastenings in concrete draft CEB guide part 1 to 3 fastenings for seismic retrofitting state of the art report on design and application written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1995-08-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fastenings for Use in Concrete Plastic Design of Fastenings with Headed and Post Installed Fasteners written by British Standards Institute Staff and published by . This book was released on 1918-10-04 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic analysis, Concretes, Structures, Structural design, Verification, Bolts, Fasteners, Screws (bolts), Failure (mechanical), Structural systems, Loading, Strength of materials
Download or read book Design of Fastenings for Use in Concrete Anchor Channels Supplementary Rules written by British Standards Institute Staff and published by . This book was released on 1918-10-08 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures, Structural systems, Structural design, Loading, Screws (bolts), Plastic analysis, Failure (mechanical), Bolts, Strength of materials, Verification, Concretes, Fasteners
Download or read book Design of anchorages in concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011-01-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Download or read book Fastenings to reinforced concrete and masonry structures state of art report part I written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1991-08-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fastenings in Concrete written by and published by Amer Society of Civil Engineers. This book was released on 1997 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although a large number of fastenings assembles are installed every day, understanding in the engineering community of their behaviour is limited, and there is no generally accepted design method. Design of fastenings in concrete over comes this. This design guide is based on a safety concept using partial safety factors taken from the CEB/FIB Model Code 1990, and it covers all loading situations and failure models. It is valid for expansion, undercut and headed anchors, and is applicable to both new structures and the repair and strengthening of existing structures. This design guide will be complemented by future CEB work to cover fastenings with bonded anchors, channel bars and shear lugs.
Download or read book Design of Fastenings in Concrete written by Comité Euro-International du Béton and published by Thomas Telford Limited. This book was released on 1996-04-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide is based on a safety concept using partial safety factors taken from the CEB/FIB Model Code 1990, and it covers all loading situations and failure models. It is valid for expansion, undercut and headed anchors, and is applicable to both new structures and the repair and strengthening of existing structures.
Download or read book Design of Fastenings for Use in Concrete written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Bonding, Adhesives
Download or read book Design of Fastenings for Use in Concrete Anchor Channels written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Anchorages, Channels (metal sections)
Download or read book Design of Fastenings for Use in Concrete Post Installed Fasteners Mechanical Systems written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis
Download or read book Connections between Steel and Concrete written by Rolf Eligehausen and published by ibidem-Verlag / ibidem Press. This book was released on 2012-02-27 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anchorage by fasteners and composite structures of steel and concrete have seen dramatic progress in research, technology and application over the past decades. The understanding of the fundamental principles underlying both disciplines has significantly improved. Concurrently, there has been rapid growth in the development of sophisticated new products and the establishment of international directives and codes to ensure their safe and economical use in a wide range of engineered structures. Although they deal with very similar problems, the two disciplines have developed independently from each other. To optimize the use of composite structures and fastenings to concrete, however, it is necessary to have knowledge of both: the local behavior of the fastening system and the global behavior of the structure. It became apparent that a forum offering the opportunity to expand and to exchange experience in the field of connecting steel and concrete would benefit all involved. Furthermore this forum would aid in the rapid dissemination of new ideas, technologies and solutions as well as explore new areas of research.This book forms the Proceedings of the 2 Symposium on “Connections between Steel and Concrete”. As the 1 Symposium in 2001 it brought together leading experts from all facets of the research, design, construction and anchor manufacturing community from around the world. Their lectures covered the topics:- test methods- behavior and design- dynamic loading: shock, earthquake, fatigue- durability- exceptional applications, strenghtening and structures- related topicsIn total 129 papers are gathered in these 2 volumes.
Download or read book Design of Fastenings for Use in Concrete General written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Seismic loading, Fatigue, Durability, Fire resistance, Earthquake-resistant design
Download or read book Commentary to EN 1992 4 Design for Fastenings for use in Concrete written by div. and published by Beuth Verlag GmbH. This book was released on 2019-09-03 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The information in DAfStb-Heft 615 aims to simplify the practice, understanding and application of EN-1992-4 using explanatory notes and the presentation of scientific background. The first part contains commentary to the content of the standard, advice on deriving information from certain provisions, supplementary rules of application and several design examples. The second part covers the technical reports referred to in the standard. The information in the first and second parts of this manual was compiled by the DAfStb's technical subcommittee "Fastening Technology" and adopted by way of a consensus procedure similar to that used for standards. This manual's third part contains contributions prepared by members of the subcommittee "Fastening Technology" on their own initiative. This contributions provide further explanatory notes to selected topics, mainly for cases of applications which are not covered within EN 1992-4.