Download or read book Design of Extrusion Forming Tools written by Olga Carneiro and published by Smithers Rapra. This book was released on 2012-12-19 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.
Download or read book Design of Extrusion Forming Tools written by Olga S. Carneiro and published by . This book was released on 2012 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity. This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of convention.
Download or read book Design of Tools for Deformation Processes written by T. Z. Blazynski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the problem of tool design - involving both the selection of suitable geometry and material- has exercised the attention of metal forming engineers for as long as this industrial activity has existed, the approach to its solution has been generally that of the 'trial and error' variety. It is only relatively recently that the continuing expansion of the bulk metal-forming industry, combined with an increase in the degree of sophistication required of its products and processes, has focussed attention on the problem of optimisation of tool design. This, in turn, produced a considerable expansion of theoretical and practical investi gations of the existing methods, techniques r,nd concepts, and helped to systematise our thinking and ideas in this area of engineering activity. In the virtual absence, so far, of a single, encyclopaedic, but sufficien tly deep, summation of the state of the art, a group of engineers and materials scientists felt that an opportune moment had arrived to try and produce, concisely, answers to many tool designers' dilemmas. This book attempts to set, in perspective, the existing - and proven - concepts of design, to show their respective advantages and weaknesses and to indicate how they should be applied to the individual main forming processes of rolling, drawing, extrusion and forging.
Download or read book Extrusion Dies for Plastics and Rubber written by Christian Hopmann and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-04-10 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Expert advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demonstrated. Fundamentals and computational procedures are clearly explained so that no special prior knowledge of the subject is required. The mechanical configuration, handling, and maintenance of extrusion dies are described. Calibration procedures for pipes and profiles are also discussed. This book was written for plastics engineers who need daily support in their practical work in industry and science, as well as for students preparing for their professional life. The 4th edition is brought up to date with several important additions, including coverage of multilayer (>15 layer) dies, melt encapsulation, and simulation tools (rheological/thermal CFD simulations).
Download or read book Extrusion Dies written by Walter Michaeli and published by . This book was released on 1984 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sheet Bulk Metal Forming written by Marion Merklein and published by Springer. This book was released on 2020-11-05 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of research projects from the Transregional Collaborative Research Centre 73. These proceedings are the result of years of research into sheet–bulk metal forming. The book discusses the challenges posed by simulating sheet–bulk metal forming. It takes into account the different phenomena characteristic to both sheet and bulk forming fields, and explores the demands this makes on modelling the processes. It then summarizes the research, and presents from a practitioner's point of view. This means the book is of interest to and helps both academics and industrial engineers within the field of sheet–bulk metal forming.
Download or read book Die Design for Extrusion of Plastic Tubes and Pipes written by Sushil Kainth and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-11-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Die Design for Extrusion of Plastic Tubes and Pipes" covers this topic from a uniquely practical perspective. The content draws on the author's over 50 years of experience in the plastics processing industry, most recently as head of the successful extrusion die manufacturing company he established in 1995. His approach is oriented toward solving production problems at the design stage using computer aided techniques for design and simulation of the plastic flow. The book provides a step-by-step guide to extrusion die design, with worked examples to illustrate problem solving. It is shown how important melt flow variables (e.g., pressure drop, shear stress, shear rate, temperature variations, and distribution variations, etc.) of key materials are determined using FEM software. The detailed drawings of complete dies for various applications that are provided constitute a rare and valuable resource. Both mono- and multilayer pipes are covered. Using the proven methods and examples from this book, the reader is well-equipped to understand dies for successful manufacture of tubes and pipes of many types. Contents: Basic Considerations Project Planning Design of a Simple Die Simulation of Melt Flow Spiral Die Monolayer Die for Tubes ?1 mm to ?6 mm Monolayer Die for Tubes ?4 mm to ?16 mm Monolayer Die for Pipes ?50 mm to ?125 mm Monolayer Die for Pipes ?140 mm to ?315 mm Coextrusion Pipe Dies Coextrusion Die (?5 mm to ?16 mm) Coextrusion Three-Layer Die (?20 mm to ?65 mm) Three-Layer-Plus-Striping Die for ?25 mm to ?110 mm Pipes Materials for Extrusion Dies
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book Aluminum Extrusion Technology written by Pradip K. Saha and published by ASM International. This book was released on 2000-01-01 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool and Manufacturing Engineers Handbook Design for Manufacturability written by Thomas J. Drozda and published by Society of Manufacturing Engineers. This book was released on 1983 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses important topics of DFM, including how it relates to concurrent engineering, management issues, getting started in DFM, how to justify using DFM, applying quality tools and how DFM is affecting computer technology (and vice versa). Covers topics starting with the creative thinking process, to combining DFM with geometric dimensioning and tolerancing. Also includes product design information that designers should know when committing pen to paper or mouse to mat.
Download or read book Extrusion written by and published by ASM International. This book was released on 2006 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extrusion Processing Technology written by Jean-Marie Bouvier and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrusion is the operation of forming and shaping a molten or dough-like material by forcing it through a restriction, or die. It is applied and used in many batch and continuous processes. However, extrusion processing technology relies more on continuous process operations which use screw extruders to handle many process functions such as the transport and compression of particulate components, melting of polymers, mixing of viscous media, heat processing of polymeric and biopolymeric materials, product texturization and shaping, defibering and chemical impregnation of fibrous materials, reactive extrusion, and fractionation of solid-liquid systems. Extrusion processing technology is highly complex, and in-depth descriptions and discussions are required in order to provide a complete understanding and analysis of this area: this book aims to provide readers with these analyses and discussions. Extrusion Processing Technology: Food and Non-Food Biomaterials provides an overview of extrusion processing technology and its established and emerging industrial applications. Potency of process intensification and sustainable processing is also discussed and illustrated. The book aims to span the gap between the principles of extrusion science and the practical knowledge of operational engineers and technicians. The authors bring their research and industrial experience in extrusion processing technology to provide a comprehensive, technical yet readable volume that will appeal to readers from both academic and practical backgrounds. This book is primarily aimed at scientists and engineers engaged in industry, research, and teaching activities related to the extrusion processing of foods (especially cereals, snacks, textured and fibrated proteins, functional ingredients, and instant powders), feeds (especially aquafeeds and petfoods), bioplastics and plastics, biosourced chemicals, paper pulp, and biofuels. It will also be of interest to students of food science, food engineering, and chemical engineering. Also available Formulation Engineering of Foods Edited by J.E. Norton, P.J. Fryer and I.T. Norton ISBN 978-0-470-67290-7 Food and Industrial Bioproducts and Bioprocessing Edited by N.T. Dunford ISBN 978-0-8138-2105-4 Handbook of Food Process Design Edited by J. Ahmed and M.S. Rahman ISBN 978-1-4443-3011-3
Download or read book Forming the Future written by Glenn Daehn and published by Springer Nature. This book was released on 2021-07-10 with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection, scientists and engineers from across industry, academia, and government present their latest improvements and innovations in all aspects of metal forming science and technology, with the intent of facilitating linkages and collaborations among these groups. Chapters cover the breadth of metal forming topics, from fundamental science to industrial application.
Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1963 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extrusion Dies for Plastics and Rubber written by Walter Michaeli and published by Hanser Gardner Publications. This book was released on 1992-10 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and computational procedures are described. Attention is given to theoretical tools. The mechanical configuration, handling, and maintenance are discussed.
Download or read book The Industrial Design Reference Specification Book written by Dan Cuffaro and published by Rockport Publishers. This book was released on 2013-10-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Design Reference & Specification Book is the first book to gather all the essential pieces of information industrial designers need on a daily basis in one concise handbook. It's a reference you'll turn to over and over again to efficiently create designs that work, last, and minimize unnecessary risk. To make designs that work and endure (and are also legal), designers need to know—or be able to find—an endless number of details. Whether it's what kind of glue needs to be used on a certain surface, metric equivalents, thread sizes, or how to apply for a patent, these details are essential and must be readily available so designers can create successful products efficiently. These pages are filled with information that is critical to successful product design, including information on: Measurement conversions Trademark and copyright standards Patents and product-related intellectual property rights/standards Setting up files for prototyping and production runs Manufacturing and packaging options to optimize the design The Industrial Design Reference & Specification Book is an essential resource for any industrial or product designer. The Reference & Specification Book series from Rockport Publishers offers students and practicing professionals in a range of creative industries must-have information in their area of specialty in an up-to-date, concise handbook.
