Download or read book Design of Embedded Robust Control Systems Using MATLAB Simulink written by Petko Hr. Petkov and published by . This book was released on 2018 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to give the necessary knowledge about the implementation of MATLABʼ and Simulinkʼ in the development of embedded control systems. Together, MATLAB and Simulink present a sophisticated programming environment which may be used for the design as well as for the implementation of embedded control systems. In this book, the authors exploit the opportunity to generate automatically and embed control code from Simulink models which allows to develop quickly efficient and error free code. The automated code generation and the availability of powerful processors make possible the implementation of complex high-order controllers which achieve fast and high-performance closed-loop dynamics.
Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.
Download or read book Design of Embedded Robust Control Systems Using MATLAB Simulink written by Petko Hristov Petkov and published by Control, Robotics and Sensors. This book was released on 2018 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the theoretical and practical aspects of embedded robust control design and implementation with the aid of MATLAB(R) and SIMULINK(R). It covers methods suitable for practical implementations, combining knowledge from control system design and computer engineering to describe the entire design cycle.
Download or read book Feedback Control Systems written by Farzin Asadi and published by Morgan & Claypool Publishers. This book was released on 2019-04-16 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feedback control systems is an important course in aerospace engineering, chemical engineering, electrical engineering, mechanical engineering, and mechatronics engineering, to name just a few. Feedback control systems improve the system's behavior so the desired response can be achieved. The first course on control engineering deals with Continuous Time (CT) Linear Time Invariant (LTI) systems. Plenty of good textbooks on the subject are available on the market, so there is no need to add one more. This book does not focus on the control engineering theories as it is assumed that the reader is familiar with them, i.e., took/takes a course on control engineering, and now wants to learn the applications of MATLAB® in control engineering. The focus of this book is control engineering applications of MATLAB® for a first course on control engineering.
Download or read book Robust Control Design with MATLAB R written by Da-Wei Gu and published by . This book was released on 2013-05-31 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by . This book was released on 2005 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear Feedback Control written by Dingyu Xue and published by SIAM. This book was released on 2007-01-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Less mathematics and more working examples make this textbook suitable for almost any type of user.
Download or read book PID Control System Design and Automatic Tuning using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2020-04-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers PID control systems from the very basics to the advanced topics This book covers the design, implementation and automatic tuning of PID control systems with operational constraints. It provides students, researchers, and industrial practitioners with everything they need to know about PID control systems—from classical tuning rules and model-based design to constraints, automatic tuning, cascade control, and gain scheduled control. PID Control System Design and Automatic Tuning using MATLAB/Simulink introduces PID control system structures, sensitivity analysis, PID control design, implementation with constraints, disturbance observer-based PID control, gain scheduled PID control systems, cascade PID control systems, PID control design for complex systems, automatic tuning and applications of PID control to unmanned aerial vehicles. It also presents resonant control systems relevant to many engineering applications. The implementation of PID control and resonant control highlights how to deal with operational constraints. Provides unique coverage of PID Control of unmanned aerial vehicles (UAVs), including mathematical models of multi-rotor UAVs, control strategies of UAVs, and automatic tuning of PID controllers for UAVs Provides detailed descriptions of automatic tuning of PID control systems, including relay feedback control systems, frequency response estimation, Monte-Carlo simulation studies, PID controller design using frequency domain information, and MATLAB/Simulink simulation and implementation programs for automatic tuning Includes 15 MATLAB/Simulink tutorials, in a step-by-step manner, to illustrate the design, simulation, implementation and automatic tuning of PID control systems Assists lecturers, teaching assistants, students, and other readers to learn PID control with constraints and apply the control theory to various areas. Accompanying website includes lecture slides and MATLAB/ Simulink programs PID Control System Design and Automatic Tuning using MATLAB/Simulink is intended for undergraduate electrical, chemical, mechanical, and aerospace engineering students, and will greatly benefit postgraduate students, researchers, and industrial personnel who work with control systems and their applications.
Download or read book State Space Control Systems written by Farzin Asadi and published by Springer Nature. This book was released on 2022-06-01 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: These days, nearly all the engineering problem are solved with the aid of suitable computer packages. This book shows how MATLAB/Simulink could be used to solve state-space control problems. In this book, it is assumed that you are familiar with the theory and concepts of state-space control, i.e., you took or you are taking a course on state-space control system and you read this book in order to learn how to solve state-space control problems with the aid of MATLAB/Simulink. The book is composed of three chapters. Chapter 1 shows how a state-space mathematical model could be entered into the MATLAB/Simulink environment. Chapter 2 shows how a nonlinear system could be linearized around the desired opperating point with the aid of tools provided by MATLAB/Simulink. Finally, Chapter 3 shows how a state-space controller could be designed with the aid MATLAB and be tested with Simulink. The book will be usefull for students and practical engineers who want to design a state-space control system.
Download or read book Modern Control Systems Analysis and Design Using MATLAB and SIMULINK written by Robert H. Bishop and published by Prentice Hall. This book was released on 1997 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This supplement is meant for professors looking for ways to integrate more of the design process into their undergraduate controls course as well as improve their students' computer skills. In each chapter, a problem from the Modern Control Systems textbook has been changed into a design problem and various aspects of the design process are explored.
Download or read book Computer Aided Control Systems Design written by Cheng Siong Chin and published by CRC Press. This book was released on 2017-12-19 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Control Systems Design: Practical Applications Using MATLAB® and Simulink® supplies a solid foundation in applied control to help you bridge the gap between control theory and its real-world applications. Working from basic principles, the book delves into control systems design through the practical examples of the ALSTOM gasifier system in power stations and underwater robotic vehicles in the marine industry. It also shows how powerful software such as MATLAB® and Simulink® can aid in control systems design. Make Control Engineering Come Alive with Computer-Aided Software Emphasizing key aspects of the design process, the book covers the dynamic modeling, control structure design, controller design, implementation, and testing of control systems. It begins with the essential ideas of applied control engineering and a hands-on introduction to MATLAB and Simulink. It then discusses the analysis, model order reduction, and controller design for a power plant and the modeling, simulation, and control of a remotely operated vehicle (ROV) for pipeline tracking. The author explains how to obtain the ROV model and verify it by using computational fluid dynamic software before designing and implementing the control system. In addition, the book details the nonlinear subsystem modeling and linearization of the ROV at vertical plane equilibrium points. Throughout, the author delineates areas for further study. Appendices provide additional information on various simulation models and their results. Learn How to Perform Simulations on Real Industry Systems A step-by-step guide to computer-aided applied control design, this book supplies the knowledge to help you deal with control problems in industry. It is a valuable reference for anyone who wants a better understanding of the theory and practice of basic control systems design, analysis, and implementation.
Download or read book Optimal and Robust Control written by Luigi Fortuna and published by CRC Press. This book was released on 2021-11-24 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many books on advanced control for specialists, but not many present these topics for non-specialists. Assuming only a basic knowledge of automatic control and signals and systems, this second edition of Optimal and Robust Control offers a straightforward, self-contained handbook of advanced topics and tools in automatic control. The book deals with advanced automatic control techniques, paying particular attention to robustness-the ability to guarantee stability in the presence of uncertainty. It explains advanced techniques for handling uncertainty and optimizing the control loop. It also details analytical strategies for obtaining reduced order models. The authors then propose using the Linear Matrix Inequality (LMI) technique as a unifying tool to solve many types of advanced control problems. Topics covered in the book include, LQR and H∞ approaches Kalman and singular value decomposition Open-loop balancing and reduced order models Closed-loop balancing Positive-real systems, bounded-real systems, and imaginary-negative systems Criteria for stability control Time-delay systems This easy-to-read text presents the essential theoretical background and provides numerous examples and MATLAB® exercises to help the reader efficiently acquire new skills. Written for electrical, electronic, computer science, space, and automation engineers interested in automatic control, this book can also be used for self-study of for a one-semester course in robust control. This fully renewed second edition of the book also includes new fundamental topics such as Lyapunov functions for stability, variational calculus, formulation in terms of optimization problems of matrix algebraic equations, negative-imaginary systems, and time-delay systems.
Download or read book Modeling and Simulation of Systems Using MATLAB and Simulink written by Devendra K. Chaturvedi and published by CRC Press. This book was released on 2017-12-19 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only do modeling and simulation help provide a better understanding of how real-world systems function, they also enable us to predict system behavior before a system is actually built and analyze systems accurately under varying operating conditions. Modeling and Simulation of Systems Using MATLAB® and Simulink® provides comprehensive, state-of-the-art coverage of all the important aspects of modeling and simulating both physical and conceptual systems. Various real-life examples show how simulation plays a key role in understanding real-world systems. The author also explains how to effectively use MATLAB and Simulink software to successfully apply the modeling and simulation techniques presented. After introducing the underlying philosophy of systems, the book offers step-by-step procedures for modeling different types of systems using modeling techniques, such as the graph-theoretic approach, interpretive structural modeling, and system dynamics modeling. It then explores how simulation evolved from pre-computer days into the current science of today. The text also presents modern soft computing techniques, including artificial neural networks, fuzzy systems, and genetic algorithms, for modeling and simulating complex and nonlinear systems. The final chapter addresses discrete systems modeling. Preparing both undergraduate and graduate students for advanced modeling and simulation courses, this text helps them carry out effective simulation studies. In addition, graduate students should be able to comprehend and conduct simulation research after completing this book.
Download or read book Analysis and design of control systems using MATLAB written by Rao V. Dukkipati and published by New Age International. This book was released on 2006 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robust Control Systems Using MATLAB written by Levy P. and published by Createspace Independent Publishing Platform. This book was released on 2016-11-21 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control Toolbox provides tools for analyzing and automatically tuning control systems for performance and robustness. You can create uncertain models by combining nominal dynamics with uncertain elements, such as an uncertain parameter or unmodeled dynamics. You can analyze the impact of plant model uncertainty on control system performance and identify worst-case combinations of uncertain elements. Using H-infinity or mu-synthesis techniques, you can design controllers that maximize robust stability and performance. The toolbox can automatically tune both SISO and MIMO robust controllers, including decentralized control architectures modeled in Simulink(r). You can validate your design by calculating worst-case gain and phase margins and worst-case sensitivity to disturbances. The more important features are de next:* Modeling of systems with uncertain parameters or neglected dynamics * Worst-case stability and performance analysis of uncertain systems* Automatic tuning of centralized and decentralized control systems* Robustness analysis and controller tuning in Simulink* H-infinity and mu-synthesis algorithms* General-purpose LMI solvers for feasibility, minimization of linear objectives, and generalized eigenvalue minimization* Model reduction algorithms based on Hankel singular values
Download or read book Model Based Design for Effective Control System Development written by Wu, Wei and published by IGI Global. This book was released on 2017-03-10 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems are an integral aspect of modern society and exist across numerous domains and applications. As technology advances more and more, the complexity of such systems continues to increase exponentially. Model-Based Design for Effective Control System Development is a critical source of scholarly information on model-centric approaches and implementations for control and other similar dynamic systems. Highlighting innovative topics such as configuration management, controllability analysis, and modeling requirements, this book is ideally designed for engineers, researchers, academics, project managers, and professionals interested in the design of embedded control systems.
Download or read book Modern Control Design written by Ashish Tewari and published by Wiley. This book was released on 2002-04-03 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Tewari emphasizes the physical principles and engineering applications of modern control system design. Instead of detailing the mathematical theory, MATLAB examples are used throughout.
