Download or read book Design of Concrete Structures with Stress Fields written by Aurello Muttoni and published by Birkhäuser. This book was released on 2012-12-06 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: 17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.

Download or read book Design of Concrete Structures with Stress Fields written by Aurelio Muttoni and published by Birkhauser. This book was released on 1997-01-01 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2020-10-29 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the most effective analysis for predicting the true stresses and deflections of concrete structures, accounting for creep and shrinkage of concrete and relaxation of prestressed reinforcement. Sustainability has become a major requirement in modern structures, which need to sustain satisfactory service over a longer life. It is not rare to specify a life span of 100 years for infrastructure such as bridges. This complete and wide-ranging study of stresses and deformations of reinforced and prestressed concrete structures focuses on design methods for avoiding the deflections and cracking that diminish serviceability. This fourth edition has a new emphasis on designing for serviceability. It has been comprehensively updated. It now includes 65 solved examples and more than 45 instructive problems with answers given at the end of the book. An accompanying website contains design calculation programs, which allow interactive data input. Independent of codes of practice, the book is universally applicable, and is especially suitable for practising engineers and graduate students.

Download or read book Structural Concrete Textbook Volume 4 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-06-01 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) to fib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2006-01-16 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures must be designed not only to be safe against failure but also to perform satisfactorily in use. This book is written for practising engineers and students, and focuses on design methods for checking deflections and cracking which can affect the serviceability of reinforced and prestressed concrete structures. The authors present accurate and easy-to-apply methods of analysing immediate and long-term stresses and deformations. These methods allow designers to account for variations of concrete properties from project to project and from country to country, making the book universally applicable. Comprehensively updated, this third edition of Concrete Structures also includes four new chapters covering such topics as: non-linear analysis of plane frames, design for serviceability of prestressed concrete, serviceability of members reinforced with fibre polymer bars, and the analysis of time-dependent internal forces with linear computer programs that are routinely used by structural designers. A website accompanies the book, featuring three design calculation programs related to stresses in cracked sections, creep coefficients and time-dependent analysis. The book contains numerous examples, some of which are worked out in the SI units and others in the Imperial units. The input data and the main results are given in both SI and Imperial units. The book is not tied to any specific code, although the latest American and European codes of practice are covered in the appendices.

Download or read book Design of Prestressed Concrete written by R. I. Gilbert and published by CRC Press. This book was released on 1990-09-13 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing both an introduction to basic concepts and an in-depth treatment of the most up-to-date methods for the design and analysis of concrete of structures, "Design of Prestressed Concrete" will service the needs of both students and professional engineers.

Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2020-10-28 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the most effective analysis for predicting the true stresses and deflections of concrete structures, accounting for creep and shrinkage of concrete and relaxation of prestressed reinforcement. Sustainability has become a major requirement in modern structures, which need to sustain satisfactory service over a longer life. It is not rare to specify a life span of 100 years for infrastructure such as bridges. This complete and wide-ranging study of stresses and deformations of reinforced and prestressed concrete structures focuses on design methods for avoiding the deflections and cracking that diminish serviceability. This fourth edition has a new emphasis on designing for serviceability. It has been comprehensively updated. It now includes 65 solved examples and more than 45 instructive problems with answers given at the end of the book. An accompanying website contains design calculation programs, which allow interactive data input. Independent of codes of practice, the book is universally applicable, and is especially suitable for practising engineers and graduate students.

Download or read book Structural Concrete written by Salah El-Metwally and published by CRC Press. This book was released on 2017-10-02 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the application of strut-and-tie models (STM) for the design of structural concrete. It presents state-of-the-art information, from fundamental theories to practical engineering applications, and also provides innovative solutions for many design problems that are not otherwise achievable using the traditional methods.

Download or read book Simplified Design of Reinforced Concrete written by Harry Parker and published by Wiley-Interscience. This book was released on 1984-10-30 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated version of this classic text explains the principles involved in the design of concrete structure buildings and summarizes the primary requirements of current building codes. Developed for self-study use as well as classroom instruction, this book requires little mathematical or engineering expertise. Example calculations are given for the practical design of contemporary structures.

Download or read book Design Examples for Strut and tie Models written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 61 is a continuation of fib Bulletin 16 (2002). Again the bulletin’s main objective is to demonstrate the application of the FIP Recommendations “Practical Design of Structural Concrete”, and especially to illustrate the use of strut-and-tie models to design discontinuity regions (D-regions) in concrete structures. Bulletin 61 presents 14 examples, most of which are existing structures built in recent years. Although some of the presented structures can be considered to be quite important and, in some instances, complex, the chosen examples are not intended to be exceptional. The main aim is to look at specific design aspects, by selecting D-regions of the presented structures that are designed and detailed according to the proposed design principles and specifications for the use of strut-and-tie models. Two papers at the end of the bulletin deal with the role of concrete tension fields in modelling with strut-and-tie models, and summarize the experiences gained by the Working Group in applying strut-and-tie models to the examples in the bulletin. It is hoped that fib Bulletin 61 will be of interest to engineers involved in the design of concrete structures, supporting the use of more consistent design and detailing tools such as strut-and-tie models.

Download or read book Reinforced Concrete written by B.S. Choo and published by CRC Press. This book was released on 2018-10-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a highly practical text gives a detailed presentation of the design of common reinforced concrete structures to limit state theory in accordance with BS 8110.

Download or read book Durability Design of Concrete Structures written by Kefei Li and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of durability of concrete at both material and structural levels, with design related issues Links two active fields in materials science and structural engineering: the durability processes of concrete materials and design methods of concrete structures Facilitates communication between the two communities, helping to implement life-cycle concepts into future design methods of concrete structures Presents state-of-the-art information on the deterioration mechanism and performance evolution of structural concrete under environmental actions and the design methods for durability of concrete structures Provides efficient support and practical tools for life-cycle oriented structural design which has been widely recognized as a new generation of design philosophy for engineering structures The author has long experience working with the topic and the materials presented have been part of the author's current teaching course of Durability and Assessment of Engineering Structures for graduate students at Tsinghua University The design methods and approaches for durability of concrete structures are developed from newly finished high level research projects and have been employed as recommended provisions in design code including Chinese Code and Eurocode 2

Download or read book Reinforced Concrete with Worked Examples written by Franco Angotti and published by Springer Nature. This book was released on 2022-06-07 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the design of reinforced and prestressed concrete structures according to the latest advances both in the field of materials, concrete and steel, and in the field of structural analysis. These advances have been included in current version of Eurocode 2, which is taken as reference. All subjects are presented starting from their theoretical bases and passing to corresponding EC2 formulations. A large part of the book is concerned with the most innovative EC2 parts, like nonlinear structural analyses, second-order effects, punching and strut-and-tie models. The textbook is equipped with numerous worked examples, useful for the reader who is not familiar with the design of reinforced and prestressed concrete structures by the Limit State Method. Examples have been chosen among the most frequent cases of the professional practice. Thanks to this structure, it can be of interest both to structural designers for their professional training and to students of engineering and architecture schools for their studies. The volume contains twelve chapters, which follow the same structure of EC2, except for chapter 6 (dealing with prestressed concrete structures), which does not match any chapter of EC2, as prestressed concrete is considered in EC2 as a particular case of reinforced concrete, and corresponding formulations are shed over different chapters.

Download or read book Simplified Design of Concrete Structures written by James Ambrose and published by John Wiley & Sons. This book was released on 2007-01-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over sixty years, the primary source for design of concrete structures--now revised and updated Simplified Design of Concrete Structures, Eighth Edition covers all the latest, commonly used concrete systems, practices, and research in the field, reinforced with examples of practical designs and general building structural systems. Updated to conform to current building codes, design practices, and industry standards. Simplified Design of Concrete Structures, Eighth Edition is a reliable, easy-to-use handbook that examines a wide range of concrete structures, building types, and construction details. It includes a wealth of illustrations, expanded text examples, exercise problems, and a helpful glossary. Highlights of this outstanding tool include: * Its use of the current American Concrete Institute Building Code for 2005 (ACI 318) and the Load and Resistance Factor Design (LRFD) method of structural design * Fundamental and real-world coverage of concrete structures that assumes no previous experience * Valuable study aids such as exercise problems, questions, and word lists enhance usability

Download or read book Design of Reinforced Concrete Structures written by M. Nadim Hassoun and published by Brooks/Cole. This book was released on 1985 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Beams Columns and Frames written by Jostein Hellesland and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.

Download or read book Concrete Structures Stresses and Deformations written by Amin Ghali and published by CRC Press. This book was released on 1994-10-13 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures must be designed both to be safe against failure and to perform satisfactorily in use. This book is written for practising engineers, students and designers and concentrates on design methods for checking the main serviceability requirements of control of deflections and cracking in reinforced and prestressed concrete structures.