Download or read book Design of CMOS Differential Voltage Controlled Oscillators for 60 GHz RF Transceiver written by 游本立 and published by . This book was released on 2007 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Implementation of 30 60 ghz Cmos Voltage controlled Oscillators written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of High Performance CMOS Voltage Controlled Oscillators written by Liang Dai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of High-Performance CMOS Voltage-Controlled Oscillators presents a phase noise modeling framework for CMOS ring oscillators. The analysis considers both linear and nonlinear operation. It indicates that fast rail-to-rail switching has to be achieved to minimize phase noise. Additionally, in conventional design the flicker noise in the bias circuit can potentially dominate the phase noise at low offset frequencies. Therefore, for narrow bandwidth PLLs, noise up conversion for the bias circuits should be minimized. We define the effective Q factor (Qeff) for ring oscillators and predict its increase for CMOS processes with smaller feature sizes. Our phase noise analysis is validated via simulation and measurement results. The digital switching noise coupled through the power supply and substrate is usually the dominant source of clock jitter. Improving the supply and substrate noise immunity of a PLL is a challenging job in hostile environments such as a microprocessor chip where millions of digital gates are present.

Download or read book Design and Modeling of Millimeter wave CMOS Circuits for Wireless Transceivers written by Ivan Chee-Hong Lai and published by Springer Science & Business Media. This book was released on 2008-03-25 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Modeling of Millimeter-wave CMOS Circuits for Wireless Transceivers describes in detail some of the interesting developments in CMOS millimetre-wave circuit design. This includes the re-emergence of the slow-wave technique used on passive devices, the license-free 60GHz band circuit blocks and a 76GHz voltage-controlled oscillator suitable for vehicular radar applications. All circuit solutions described are suitable for digital CMOS technology. Digital CMOS technology developments driven by Moore’s law make it an inevitable solution for low cost and high volume products in the marketplace. Explosion of the consumer wireless applications further makes this subject a hot topic of the day. The book begins with a brief history of millimetre-wave research and how the silicon transistor is born. Originally meant for different purposes, the two technologies converged and found its way into advanced chip designs. The second part of the book describes the most important passive devices used in millimetre-wave CMOS circuits. Part three uses these passive devices and builds circuit blocks for the wireless transceiver. The book completes with a comprehensive list of references for further readings. Design and Modeling of Millimeter-wave CMOS Circuits for Wireless Transceivers is useful to show the analogue IC designer the issues involved in making the leap to millimetre-wave circuit designs. The graduate student and researcher can also use it as a starting point to understand the subject or proceed to innovative from the works described herein.

Download or read book Design of CMOS Voltage Controlled Oscillator and Mixer for 60GHz Millimeter Wave Applications written by 黃凱立 and published by . This book was released on 2009 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RF CMOS Oscillators for Modern Wireless Applications written by Masoud Babaie and published by CRC Press. This book was released on 2022-09-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: While mobile phones enjoy the largest production volume ever of any consumer electronics products, the demands they place on radio-frequency (RF) transceivers are particularly aggressive, especially on integration with digital processors, low area, low power consumption, while being robust against process-voltage-temperature variations. Since mobile terminals inherently operate on batteries, their power budget is severely constrained. To keep up with the ever increasing data-rate, an ever-decreasing power per bit is required to maintain the battery lifetime. The RF oscillator is the second most power-hungry block of a wireless radio (after power amplifiers). Consequently, any power reduction in an RF oscillator will greatly benefit the overall power efficiency of the cellular transceiver. Moreover, the RF oscillators' purity limits the transceiver performance. The oscillator's phase noise results in power leakage into adjacent channels in a transmit mode and reciprocal mixing in a receive mode. On the other hand, the multi-standard and multi-band transceivers that are now trending demand wide tuning range oscillators. However, broadening the oscillator’s tuning range is usually at the expense of die area (cost) or phase noise. The main goal of this book is to bring forth the exciting and innovative RF oscillator structures that demonstrate better phase noise performance, lower cost, and higher power efficiency than currently achievable. Technical topics discussed in RF CMOS Oscillators for Modern Wireless Applications include:  Design and analysis of low phase-noise class-F oscillators Analyze a technique to reduce 1/f noise up-conversion in the oscillators Design and analysis of low power/low voltage oscillators Wide tuning range oscillators Reliability study of RF oscillators in nanoscale CMOS

Download or read book Transformer Based Design Techniques for Oscillators and Frequency Dividers written by Howard Cam Luong and published by Springer. This book was released on 2015-10-07 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of transformer-based design techniques that enable CMOS oscillators and frequency dividers to achieve state-of-the-art performance. Design, optimization, and measured performance of oscillators and frequency dividers for different applications are discussed in detail, focusing on not only ultra-low supply voltage but also ultra-wide frequency tuning range and locking range. This book will be an invaluable reference for anyone working or interested in CMOS radio-frequency or mm-Wave integrated circuits and systems.

Download or read book RF and Microwave Transistor Oscillator Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2007-04-30 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer electronics and communications applications using Radio Frequency (RF) and microwave circuits has implications for oscillator design. Applications working at higher frequencies and using novel technologies have led to a demand for more robust circuits with higher performance and functionality, but decreased costs, size and power consumption. As a result, there is also a need for more efficient oscillators. This book presents up to date information on all aspects of oscillator design, enabling a selection of the best oscillator topologies with optimized noise reduction and electrical performance. RF and Microwave Transistor Oscillator Design covers: analyses of non-linear circuit design methods including spectral-domain analysis, time-domain analysis and the quasilinear method; information on noise in oscillators including chapters on varactor and oscillator frequency tuning, CMOS voltage-controlled oscillators and wideband voltage-controlled oscillators; information on the stability of oscillations, with discussions on the stability of multi-resonant circuits and the phase plane method; optimized design and circuit techniques, beginning with the empirical and analytic design approaches, moving on to the high-efficiency design technique; general operation and design principles of oscillators, including a section on the historical aspects of oscillator configurations. A valuable reference for practising RF and Microwave designers and engineers, RF and Microwave Transistor Oscillator Design is also useful for lecturers, advanced students and research and design (R&D) personnel.

Download or read book High Data Rate Transmitter Circuits written by C.J. de Ranter and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide and introduction to the design of key RF building blocks used in high data rate transmitters emphasizes CMOS circuit techniques applicable to oscillators and upconvertors. The book is written in an easily accessible manner, without losing detail on the technical side.

Download or read book A Dual Mode Wide Band Cmos Oscillator written by Shatam Agarwal and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband voltage-controlled oscillators are critical to the design of millimeter-wave (mm-wave) frequency synthesizers. This thesis proposes a design technique that can be used to significantly extend the achievable frequency span of an oscillator. A dual-band oscillator topology is described that can be configured to operate in one of two modes, by an electrical reconfiguration of the negative resistance core around the resonant tank, without switching passive elements within the tank itself. The configuration helps to minimize the difference in phase noise performance between the two modes, while achieving a wide tuning range. To verify the concept, an mm-wave VCO that operates at 30 GHz is designed in a commercial 0.18-um CMOS technology, with an approximate simulated tuning range of 20%. A dual-mode oscillator is also designed in 0.13-um CMOS technology at 60 GHz.

Download or read book Wireless CMOS Frequency Synthesizer Design written by J. Craninckx and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent boom in the mobile telecommunication market has trapped the interest of almost all electronic and communication companies worldwide. New applications arise every day, more and more countries are covered by digital cellular systems and the competition between the several providers has caused prices to drop rapidly. The creation of this essentially new market would not have been possible without the ap pearance of smalI, low-power, high-performant and certainly low-cost mobile termi nals. The evolution in microelectronics has played a dominant role in this by creating digital signal processing (DSP) chips with more and more computing power and com bining the discrete components of the RF front-end on a few ICs. This work is situated in this last area, i. e. the study of the full integration of the RF transceiver on a single die. Furthermore, in order to be compatible with the digital processing technology, a standard CMOS process without tuning, trimming or post-processing steps must be used. This should flatten the road towards the ultimate goal: the single chip mobile phone. The local oscillator (LO) frequency synthesizer poses some major problems for integration and is the subject of this work. The first, and also the largest, part of this text discusses the design of the Voltage Controlled Oscillator (VCO). The general phase noise theory of LC-oscillators is pre sented, and the concept of effective resistance and capacitance is introduced to char acterize and compare the performance of different LC-tanks.

Download or read book Analog Circuit Design written by Herman Casier and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design is based on the yearly Advances in Analog Circuit Design workshop. The aim of the workshop is to bring together designers of advanced analogue and RF circuits for the purpose of studying and discussing new possibilities and future developments in this field. Selected topics for AACD 2007 were: (1) Sensors, Actuators and Power Drivers for the Automotive and Industrial Environment; (2) Integrated PA's from Wireline to RF; (3) Very High Frequency Front Ends.

Download or read book Analysis and Design of Quadrature Oscillators written by Luis B. Oliveira and published by Springer Science & Business Media. This book was released on 2008-07-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern RF receivers and transmitters require quadrature oscillators with accurate quadrature and low phase-noise. Existing literature is dedicated mainly to single oscillators, and is strongly biased towards LC oscillators. This book is devoted to quadrature oscillatorsand presents adetailed comparative study ofLC and RCosc- lators, both at architectural and at circuit levels. It is shown that in cross-coupled RC oscillators both the quadrature error and phase-noise are reduced, whereas in LC - cillators the coupling decreases the quadrature error, but increases the phase-noise. Thus, quadrature RC oscillators can be a practical alternative to LC oscillators, - pecially when area and cost are to be minimized. The main topics of the book are: cross-coupled LC quasi-sinusoidal oscillators, cross-coupled RC relaxation oscillators, a quadrature RC oscillator-mixer, and t- integrator oscillators. The effect of mismatches on the phase-error and the pha- noise are thoroughly investigated. The book includes many experimental results, obtained from different integrated circuit prototypes, in the GHz range. A structured design approach is followed: a technology independent study, with ideal blocks, is performed initially, and then the circuit level design is addressed. This book can be used in advanced courses on RF circuit design. In addition to post-graduate students and lecturers, this book will be of interest to design engineers and researchers in this area.

Download or read book CMOS Millimeter wave Receiver Front end Circuits and Their Applications written by Ning Zhang and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: The improvement of high frequency capability for silicon devices has made implementation of millimeter-wave (mm-wave) silicon integrated circuits operating at 60 GHz, 77 GHz and even higher feasible. This had led to the proposal of a low-cost 77-GHz CMOS transceiver for automobile radar application and a 60-GHz wireless inter-chip interconnect system. This Ph. D work demonstrated an 80-GHz mm-wave receiver chain integrated with a frequency synthesizer fabricated using low leakage transistors of a low cost 65-nm bulk CMOS technology. An 80-GHz single-ended low noise amplifier (LNA), a 77-GHz down-conversion mixer and a 94-GHz voltage-controlled oscillator (VCO) have been separately demonstrated. A 1.2-V supply, the single-ended LNA exhibits 12-dB gain and 9-dB noise figure (NF) consuming 32- mW power. The mixer has -8-dB conversion gain and 17 dB NF while consuming only 6-mW power. With a 1.5 V supply, the VCO achieves 5.8% tuning range around 94 GHz and - 87dBc/Hz phase noise at 1 MHz offset while consuming 14-mW power. These designs demonstrate that the low-cost, low leakage CMOS process can be used for the design of mmwave circuit blocks and potentially larger integrated system despite the challenges of using the technology such as low voltage headroom, moderate metallization performance and strict metal density filling requirements.

Download or read book RF CMOS Oscillators for Modern Wireless Applications written by Masoud Babaie and published by River Publishers Circuits and. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of this book is to bring forth the exciting and innovative RF oscillator structures that demonstrate better phase noise performance, lower cost, and higher power efficiency than currently achievable.

Download or read book CMOS RF Circuit Design for Reliability and Variability written by Jiann-Shiun Yuan and published by Springer. This book was released on 2016-04-13 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is CMOS RF circuit design for reliability. The device reliability and process variation issues on RF transmitter and receiver circuits will be particular interest to the readers in the field of semiconductor devices and circuits. This proposed book is unique to explore typical reliability issues in the device and technology level and then to examine their impact on RF wireless transceiver circuit performance. Analytical equations, experimental data, device and circuit simulation results will be given for clear explanation. The main benefit the reader derive from this book will be clear understanding on how device reliability issues affects the RF circuit performance subjected to operation aging and process variations.

Download or read book A Dual mode Wide band CMOS Oscillator for Millimeter wave Applications written by Shatam Agarwal and published by . This book was released on 2010 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband voltage-controlled oscillators are critical to the design of millimeter wave frequency synthesizers. This thesis proposes a design technique that can be used to significantly extend the achievable frequency span of an oscillator. A dual-band oscillator topology is described that can be configured to operate in one of two modes, by an electrical reconfiguration of the negative resistance core around the resonant tank, without switching passive elements within the tank itself. The configuration helps to minimize the difference in phase noise performance between the two modes, while achieving a wide tuning range. To verify the concept, a mm-wave VCO that operates at 30-GHz is designed in a commercial 0.18-um CMOS technology, with an approximate simulated tuning range of 20%. A dual-mode oscillator is also designed in a 0.13-um technology at 60-GHz.