Download or read book Fire Safety Design for Tall Buildings written by Feng Fu and published by CRC Press. This book was released on 2021-02-18 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire Safety Design for Tall Buildings provides structural engineers, architects, and students with a systematic introduction to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter—such as performance-based design and the basic principles of fire development and heat transfer. It also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as the Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.
Download or read book Design of Buildings for Fire Safety written by E. E. Smith and published by ASTM International. This book was released on 1979 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Fire Safety for Very Tall Buildings written by International Code Council and published by Springer Nature. This book was released on 2021-10-30 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guide provides information on special topics that affect the fire safety performance of very tall buildings, their occupants and first responders during a fire. This Guide addresses these topics as part of the overall building design process using performance-based fire protection engineering concepts as described in the SFPE Engineering Guide to Performance Based Fire Protection. This Guide is not intended to be a recommended practice or a document that is suitable for adoption as a code. The Guide pertains to “super tall,” “very tall” and “tall” buildings. Throughout this Guide, all such buildings are called “very tall buildings.” These buildings are characterized by heights that impose fire protection challenges; they require special attention beyond the protection features typically provided by traditional fire protection methods. This Guide does not establish a definition of buildings that fall within the scope of this document.
Download or read book Simplified Design for Building Fire Safety written by James Patterson and published by John Wiley & Sons. This book was released on 1993-12-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized into three sections, it begins with the phenomena of fire followed by the principles of design by which one develops a defense against fire disaster in buildings. Lastly, it deals with the hardware of fire control, communication and extinguishment. A thorough analysis of building code criteria regarding fire safety is included. Each chapter features study aids along with questions and answers.
Download or read book Fire Safety of Historical Buildings written by Gabriele Bernardini and published by Springer. This book was released on 2017-04-19 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book applies a behavioral point of view to individuals’ fire safety in historic buildings. It outlines theoretical and operative issues, based on recent studies and international guidelines. Firstly, critical issues for Building Heritage fire safety are widely discussed, by including the modelling of human factor and man-environment-fire interference in these architectural spaces. A significant part of the book includes a discussion on emergency modeling and simulation. A source code for representing the fire evacuation process (including man-evacuation facilities interactions) is offered to the reader. Methods for effectiveness assessment of risk-reducing solutions are provided and tested in a case-study. Being a structured approach to occupants-related problems during a fire in heritage buildings, it offers an innovative methodology and practical examples that researchers and designers can use as a guide when proposing and testing solutions. Evaluation indexes for effectiveness assessment (also useful for future guidelines or handbooks) are included. Readers are encouraged to understand these indexes within the proposed approach, so as to extend their applications and possibilities of how to introduce human behaviors-based solutions in other fields. Lastly, attention is focused on the proposal and evaluation of low-impact and not-invasive strategies, such as ones based on wayfinding elements. From this point of view, the pros and cons of wayfinding systems are discussed: these are important today, especially for fire-safety designers, because of the ongoing innovations in this field.
Download or read book Design of Buildings for Fire Safety written by and published by . This book was released on 1979 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire from First Principles written by Paul Stollard and published by Routledge. This book was released on 2014-02-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire safety is a fundamental requirement of any building, and is of concern to several professions which contribute to the construction process. Following on from the success of the previous three editions, Paul Stollard has returned to update and expand this classic introduction to the theoretical basis of fire-safety engineering and risk assessment. Avoiding complex calculations and specifications, Fire From First Principles is written with architects, building control officers and other construction professionals without fire engineering backgrounds in mind. By tackling an overview of the factors which contribute to fire risk, and how building design can limit these, the reader will gain a fuller understanding of the science behind fire regulations, safe design, and construction solutions. All regulations content is fully updated, and has been expanded to cover the USA and China as well as the UK. Ideal for students of architecture and construction subjects, as well as practitioners from all built environment fields learning about fire safety for the first time.
Download or read book Fire Safety Challenges of Green Buildings written by Brian Meacham and published by Springer Science & Business Media. This book was released on 2013-08-05 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns and advances in architectural technologies have lead to a greater number of green buildings or buildings with green, eco-friendly elements. However, from a practical standpoint, there is no incident reporting system in the world that tracks data on fire incidents in green buildings. Fire safety objectives are not explicitly considered in most green rating schemes, and green design features have been associated with photovoltaic panels and roof materials, lightweight timber frame buildings, and combustible insulation materials. Fire Safety Challenges of Green Buildings is the result of an extensive global literature review that sought to identify issues related to green building elements or features and ways to ensure those issues are tracked for future improvement. The book identifies actual incidents of fires in green buildings or involving green building elements, points out issues with green building elements that would increase fire risk, clarifies reports and studies that address ways to reduce fire risk in green design elements, and compares research studies that explicitly incorporate fire safety into green building design. The authors also pinpoint gaps and specific research needs associated with understanding and addressing fire risk and hazards with green building design. Using their data, the authors developed a set of matrices relating these green attributes and potential fire hazards. With these comprehensive tools, potential mitigation strategies for addressing the relative increase in fire risk or hazard associated with the green building elements and features have been identified. Fire Safety Challenges of Green Buildings is intended for practitioners as a tool for analyzing building safety issues in green architecture and developing methods for tracking data related to green design elements and their potential hazards. Researchers working in a related field will also find the book valuable.
Download or read book Fire from First Principles written by John Abrahams and published by Routledge. This book was released on 2003-04-29 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of an introduction to building fire safety that explains from first principles the basic strategies of fire safety design available to the building and construction professional.
Download or read book Performance Based Fire Safety Design written by Morgan J. Hurley and published by CRC Press. This book was released on 2015-04-14 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master an Approach Based on Fire Safety Goals, Fire Scenarios, and the Assessment of Design AlternativesPerformance-Based Fire Safety Design demonstrates how fire science can be used to solve fire protection problems in the built environment. It also provides an understanding of the performance-based design process, deterministic and risk-based ana
Download or read book Fire Safety Engineering Design of Structures Third Edition written by John A. Purkiss and published by CRC Press. This book was released on 2013-12-05 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing structures to withstand the effects of fire is challenging, and requires a series of complex design decisions. This third edition of Fire Safety Engineering Design of Structures provides practising fire safety engineers with the tools to design structures to withstand fires. This text details standard industry design decisions, and offers expert design advice, with relevant historical data. It includes extensive data on materials’ behaviour and modeling -- concrete, steel, composite steel-concrete, timber, masonry, and aluminium. While weighted to the fire sections of the Eurocodes, this book also includes historical data to allow older structures to be assessed. It extensively covers fire damage investigation, and includes as far back as possible, the background to code methods to enable the engineer to better understand why certain procedures are adopted. What’s new in the Third Edition? An overview in the first chapter explains the types of design decisions required for optimum fire performance of a structure, and demonstrates the effect of temperature rise on structural performance of structural elements. It extends the sections on less common engineering materials. The section on computer modelling now includes material on coupled heat and mass transfer, enabling a better understanding of the phenomenon of spalling in concrete. It includes a series of worked examples, and provides an extensive reference section. Readers require a working knowledge of structural mechanics and methods of structural design at ambient conditions, and are helped by some understanding of thermodynamics of heat transfer. This book serves as a resource for engineers working in the field of fire safety, consultants who regularly carry out full fire safety design for structure, and researchers seeking background information. Dr John Purkiss is a chartered civil and structural engineer/consultant and former lecturer in structural engineering at Aston University, UK. Dr Long-Yuan Li is Professor of Structural Engineering at Plymouth University, UK, and a Fellow of the Institution of Structural Engineers.
Download or read book Fire Protection Engineering in Building Design written by Jane Lataille and published by Butterworth-Heinemann. This book was released on 2003 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the implementation and integration of fire protection engineering, this concise reference encompasses not only the basic information on the functions, design and implementation of systems, but also reveals how this area can be integrated withother engineering disciplines.
Download or read book Application of Fire Safety Engineering Principles to the Design of Buildings written by British Standards Institute Staff and published by . This book was released on 2001 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire safety in buildings, Fire safety, Hazard prevention in buildings, Buildings, Design, Safety engineering, Structural fire protection, Fire spread prevention, Means of escape from fire in buildings, Fire alarms, Fire detectors, Risk assessment, Fire risks, Environmental engineering
Download or read book Design and Analysis of Tall and Complex Structures written by Feng Fu and published by Butterworth-Heinemann. This book was released on 2018-02-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures. This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures. Numerous worked-through examples of existing prestigious projects around the world (such as Jeddah Tower, Shanghai Tower, and Petronas Tower etc.) are provided to assist the reader’s understanding of the topics. • Provides the latest modelling methods in design such as BIM and Parametric Modelling technique. • Detailed explanations of widely used programs in current design practice, such as SAP2000, ETABS, ANSYS, and Rhino. • Modelling case studies for all types of tall buildings and complex structures, such as: Buttressed Core system, diagrid system, Tube system, Tensile structures and offshore structures etc.
Download or read book Fire Safety in Timber Buildings written by [Anonymus AC08356501] and published by . This book was released on 2010 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Safety Retrofitting in Historic Buildings written by and published by . This book was released on 1989 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
