Download or read book Design of Blast resistant Buildings in Petrochemical Facilities written by Society of Civil Engineers. Task Committee on Blast Resistant Design and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition provides general guidelines for the structural design of blast-resistant petrochemical facilities. Information is provided for U.S. Occupational Safety and Health Administration (OSHA) requirements, design objectives, siting considerations, and load determination, and references cite sources of detailed information. Detailed coverage is provided for types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures. Typical details and ancillary considerations, such as doors and windows, are also included. A how-to discussion on the upgrade of existing buildings is provided for older facilities which may not meet current needs. Three example calculations are included to illustrate design procedures.
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book Design of Blast Resistant Structures written by Ganpat Mal Singhvi and published by . This book was released on 1963 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Protection of Buildings written by American Society of Civil Engineers and published by . This book was released on 2023-03-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 59-22 provides minimum requirements for planning, design, construction, and assessment of new and existing buildings subject to the effects of accidental or malicious explosions.
Download or read book Design of Blast Resistant Buildings in Petrochemical Facilities written by Society of Civil Engineers. Task Committee on Blast Resistant Design and published by Amer Society of Civil Engineers. This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing guidelines in the structural design of blast resistant petrochemical facilities, this book offers coverage for OSHA requirements, design objectives, siting considerations, and load determination. It also covers types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures.
Download or read book Design of Blast Resistant Structures written by Ramon Gilsanz and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Resistant Structures written by and published by . This book was released on 1986 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design for Physical Security written by Task Committee on Structural Design for Physical Security and published by ASCE Publications. This book was released on 1999-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.
Download or read book Structural Dynamics in Earthquake and Blast Resistant Design written by BK Raghu Prasad and published by CRC Press. This book was released on 2020-08-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the fundamentals of structural dynamics required for earthquake blast resistant design, Structural Dynamics in Earthquake and Blast Resistant Design initiates a new approach of blending a little theory with a little practical design in order to bridge this unfriendly gap, thus making the book more structural engineer-friendly. This is attempted by introducing the equations of motion followed by free and forced vibrations of SDF and MDF systems, D’Alembert’s principle, Duhammel’s integral, relevant impulse, pulse and sinusoidal inputs, and, most importantly, support motion and triangular pulse input required in earthquake and blast resistant designs, respectively. Responses of multistorey buildings subjected to earthquake ground motion by a well-known mode superposition technique are explained. Examples of real-size structures as they are being designed and constructed using the popular ETABS and STAAD are shown. Problems encountered in such designs while following the relevant codes of practice like IS 1893 2016 due to architectural constraints are highlighted. A very difficult constraint is in avoiding torsional modes in fundamental and first three modes, the inability to get enough mass participation, and several others. In blast resistant design the constraint is to model the blast effects on basement storeys (below ground level). The problem is in obtaining the attenuation due to the soil. Examples of inelastic hysteretic systems where top soft storey plays an important role in expending the input energy, provided it is not below a stiffer storey (as also required by IS 1893 2016), and inelastic torsional response of structures asymmetric in plan are illustrated in great detail. In both cases the concept of ductility is explained in detail. Results of response spectrum analyses of tall buildings asymmetric in plan constructed in Bengaluru using ETABS are mentioned. Application of capacity spectrum is explained and illustrated using ETABS for a tall building. Research output of retrofitting techniques is mentioned. Response spectrum analysis using PYTHON is illustrated with the hope that it could be a less expensive approach as it is an open source code. A new approach of creating a fictitious (imaginary) boundary to obtain blast loads on below-ground structures devised by the author is presented with an example. Aimed at senior undergraduates and graduates in civil engineering, earthquake engineering and structural engineering, this book: Explains in a simple manner the fundamentals of structural dynamics pertaining to earthquake and blast resistant design Illustrates seismic resistant designs such as ductile design philosophy and limit state design with the use of capacity spectrum Discusses frequency domain analysis and Laplace transform approach in detail Explains solutions of building frames using software like ETABS and STAAD Covers numerical simulation using a well-known open source tool PYTHON
Download or read book Tall Building Design written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-10-04 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the Question Frequently Proposed to the Designer by Architects: "Can We Do This? Offering guidance on how to use code-based procedures while at the same time providing an understanding of why provisions are necessary, Tall Building Design: Steel, Concrete, and Composite Systems methodically explores the structural behavior of steel, concrete, and composite members and systems. This text establishes the notion that design is a creative process, and not just an execution of framing proposals. It cultivates imaginative approaches by presenting examples specifically related to essential building codes and standards. Tying together precision and accuracy—it also bridges the gap between two design approaches—one based on initiative skill and the other based on computer skill. The book explains loads and load combinations typically used in building design, explores methods for determining design wind loads using the provisions of ASCE 7-10, and examines wind tunnel procedures. It defines conceptual seismic design, as the avoidance or minimization of problems created by the effects of seismic excitation. It introduces the concept of performance-based design (PBD). It also addresses serviceability considerations, prediction of tall building motions, damping devices, seismic isolation, blast-resistant design, and progressive collapse. The final chapters explain gravity and lateral systems for steel, concrete, and composite buildings. The Book Also Considers: Preliminary analysis and design techniques The structural rehabilitation of seismically vulnerable steel and concrete buildings Design differences between code-sponsored approaches The concept of ductility trade-off for strength Tall Building Design: Steel, Concrete, and Composite Systems is a structural design guide and reference for practicing engineers and educators, as well as recent graduates entering the structural engineering profession. This text examines all major concrete, steel, and composite building systems, and uses the most up-to-date building codes.
Download or read book Blast Protection of Civil Infrastructures and Vehicles Using Composites written by Nasim Uddin and published by Elsevier. This book was released on 2010-03-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the upsurge in terrorism in recent years and the possibility of accidental blast threats, there is growing interest in manufacturing blast 'hardened' structures and retrofitting blast mitigation materials to existing structures. Composites provide the ideal material for blast protection as they can be engineered to give different levels of protection by varying the reinforcements and matrices.Part one discusses general technical issues with chapters on topics such as blast threats and types of blast damage, processing polymer matrix composites for blast protection, standards and specifications for composite blast protection materials, high energy absorbing composite materials for blast resistant design, modelling the blast response of hybrid laminated composite plates and the response of composite panels to blast wave pressure loadings. Part two reviews applications including ceramic matrix composites for ballistic protection of vehicles and personnel, using composites to protect military vehicles from mine blasts, blast protection of buildings using FRP matrix composites, using composites in blast resistant walls for offshore, naval and defence related structures, using composites to improve the blast resistance of columns in buildings, retrofitting using fibre reinforced polymer composites for blast protection of buildings and retrofitting to improve the blast response of concrete masonry walls.With its distinguished editor and team of expert contributors, Blast protection of civil infrastructures and vehicles using composites is a standard reference for all those concerned with protecting structures from the effects of blasts in both the civil and military sectors. - Reviews the role of composites in blast protection with an examination of technical issues, applications of composites and ceramic matrix composites - Presents numerical examples of simplified blast load computation and an overview of the basics of high explosives includes important properties and physical forms - Varying applications of composites for protection are explored including military and non-military vehicles and increased resistance in building columns and masonry walls
Download or read book Explosion Resistant Buildings written by T. Bangash and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book highlights all aspects of the analysis and design of buildings subject to impact, explosion and fire. It is a definitive reference book and contains 10 chapters from a wide international prospective. Three-dimensional finite element and discrete element techniques are included. They are applied to buildings such as the World Trade Center (WTC Twin Towers) and the Federal Building in Oklahoma on the basis of the designers drawings, data and other information. Many small case studies are also included. The book has a comprehensive bibliography and a large appendix providing background analysis and computer subroutines of recently developed programs.
Download or read book Blast Effects on Buildings written by David Cormie and published by Thomas Telford Publishing. This book was released on 2009 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflects developments in the field of blast engineering since the early 1990s. Combining coverage of the design standards, codes and materials with an appreciation of the needs and demands of the designer, this book provides the engineer with a comprehensive source of reference for the main elements of blast engineering design in modern practice.
Download or read book Design of Blast resistant Buildings written by Roshan Upadhyaya and published by . This book was released on 2009 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Design of Blast Resistant Structures written by Ramon Gilsanz and published by . This book was released on 2013 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISC Security Design Criteria for New Federal Office Buildings and Major Modernization Projects written by National Research Council and published by National Academies Press. This book was released on 2003-05-16 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 1999, GSA and the U.S. Department of State convened a symposium to discuss the apparently conflicting objectives of security from terrorist attack and the design of public buildings in an open society. The symposium sponsors rejected the notion of rigid, prescriptive design approaches. The symposium concluded with a challenge to the design and security professions to craft aesthetically appealing architectural solutions that achieve balanced, performance-based approaches to both openness and security. In response to a request from the Office of the Chief Architect of the Public Buildings Service, the National Research Council (NRC) assembled a panel of independent experts, the Committee to Review the Security Design Criteria of the Interagency Security Committee. This committee was tasked to evaluate the ISC Security Design Criteria to determine whether particular provisions might be too prescriptive to allow a design professional "reasonable flexibility" in achieving desired security and physical protection objectives.
