Download or read book Design of Blast resistant Buildings in Petrochemical Facilities written by Society of Civil Engineers. Task Committee on Blast Resistant Design and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition provides general guidelines for the structural design of blast-resistant petrochemical facilities. Information is provided for U.S. Occupational Safety and Health Administration (OSHA) requirements, design objectives, siting considerations, and load determination, and references cite sources of detailed information. Detailed coverage is provided for types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures. Typical details and ancillary considerations, such as doors and windows, are also included. A how-to discussion on the upgrade of existing buildings is provided for older facilities which may not meet current needs. Three example calculations are included to illustrate design procedures.
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book Design of Blast Resistant Buildings in Petrochemical Facilities written by Society of Civil Engineers. Task Committee on Blast Resistant Design and published by Amer Society of Civil Engineers. This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing guidelines in the structural design of blast resistant petrochemical facilities, this book offers coverage for OSHA requirements, design objectives, siting considerations, and load determination. It also covers types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures.
Download or read book Blast Protection of Buildings written by American Society of Civil Engineers and published by . This book was released on 2023-03-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 59-22 provides minimum requirements for planning, design, construction, and assessment of new and existing buildings subject to the effects of accidental or malicious explosions.
Download or read book Blast Resistant Structures written by and published by . This book was released on 1986 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Loads for Petrochemical and Other Industrial Facilities written by American Society of Civil Engineers. Task Committee on Wind Induced Forces and published by Amer Society of Civil Engineers. This book was released on 2011 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides state-of-the-practice guidelines for the computation of wind-induced forces on industrial facilities with structural features outside the scope of current codes and standards.
Download or read book Construction Management and Design of Industrial Concrete and Steel Structures written by Mohamed A. El-Reedy and published by CRC Press. This book was released on 2010-09-29 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent worldwide boom in industrial construction and the corresponding billions of dollars spent every year in industrial, oil, gas, and petrochemical and power generation project, has created fierce competition for these projects. Strong management and technical competence will bring your projects in on time and on budget. An in-depth explorat
Download or read book Case Studies of Building Rehabilitation and Design written by João M. P. Q. Delgado and published by Springer Nature. This book was released on 2021-04-24 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research works related to blast resistant buildings, green roofs and sustainability, retrofit interventions with C-FRP fibers, analysis of cracking in pile cap foundation by delayed ettringite formation and acoustic performance in buildings. It demonstrates that building pathology is a holistic approach to studying and understanding buildings, and in particular, building defects or problems and associated rehabilitation actions. Offering a systematic review of the current state of knowledge, the book serves as a valuable resource for scientists, students, practitioners, and lecturers in various scientific and engineering disciplines, including civil and materials engineering, as well as and other interested parties.
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Recent Advances in Structural Engineering Volume 1 written by A. Rama Mohan Rao and published by Springer. This book was released on 2018-08-01 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.
Download or read book The Whole Building Handbook written by Maria Block and published by Routledge. This book was released on 2010-02-09 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Whole Building Handbook is a compendium of all the issues and strategies that architects need to understand to design and construct sustainable buildings for a sustainable society. The authors move beyond the current definition of sustainability in architecture, which tends to focus on energy-efficiency, to include guidance for architecture that promotes social cohesion, personal health, renewable energy sources, water and waste recycling systems, permaculture, energy conservation - and crucially, buildings in relation to their place. The authors offer a holistic approach to sustainable architecture and authoritative technical advice, on: * How to design and construct healthy buildings, through choosing suitable materials, healthy service systems, and designing a healthy and comfortable indoor climate, including solutions for avoiding problems with moisture, radon and noise as well as how to facilitate cleaning and maintenance. * How to design and construct buildings that use resources efficiently, where heating and cooling needs and electricity use is minimized and water-saving technologies and garbage recycling technologies are used. * How to 'close' organic waste, sewage, heat and energy cycles. For example, how to design a sewage system that recycles nutrients. * Includes a section on adaptation of buildings to local conditions, looking at how a site must be studied with respect to nature, climate and community structure as well as human activities. The result is a comprehensive, thoroughly illustrated and carefully structured textbook and reference.
Download or read book Seismic Evaluation and Design of Petrochemical and Other Industrial Facilities written by American Society of Civil Engineers. Task Committee on Seismic Evaluation and Design of Petrochemical Facilities and published by . This book was released on 2020 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This report offers practical recommendations regarding the design and safety of new and existing petrochemical facilities during and following an earthquake"--
Download or read book Proceedings of XXIV AIMETA Conference 2019 written by Antonio Carcaterra and published by Springer Nature. This book was released on 2020-03-31 with total page 2200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the XXIV Conference of the Italian Association of Theoretical and Applied Mechanics, held in Rome, Italy, on September 15-19, 2019 (AIMETA 2019). The conference topics encompass all aspects of general, fluid, solid and structural mechanics, as well as mechanics for machines and mechanical systems, including theoretical, computational and experimental techniques and technological applications. As such the book represents an invaluable, up-to-the-minute tool, providing an essential overview of the most recent advances in the field.
Download or read book Safety Aspects of Nuclear Power Plants in Human Induced External Events written by International Atomic Energy Agency and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides detailed guidelines for the safety assessment of nuclear power structures against mechanical impact, explosion and fire caused by human induced external events. It covers the characterization of loading, the assessment of structural integrity using both simplified methods and more elaborated methodologies, and the assessment of induced vibration. The acceptance criteria provided in the publication are for different failure modes: overall stability, overall bending and shear, local failure modes and induced vibrations. The process of analysing fire consequences is also included.
Download or read book Guidelines for Seismic Evaluation and Design of Petrochemical Facilities written by American Society of Civil Engineers. Task Committee on Seismic Evaluation and Design of Petrochemical Facilities and published by American Society of Civil Engineers. This book was released on 1997 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics include design and evaluation philosophy, seismic hazards such as ground shaking, fault rupture, and tsunamis, analysis and load definition, primary structural design criteria and considerations, walkdown evaluations of existing facilities, design and evaluation of tanks at grade, and retrofit design and procedures for seismically deficit structures.
Download or read book Wind Loads and Anchor Bolt Design for Petrochemical Facilities written by Task Committee on Anchor Bolt Design and published by ASCE Publications. This book was released on 1997-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by theØTask Committee on Wind-Induced Forces and Task Committee on Anchor Bolt Design of the Petrochemical Committee of the Energy Division of ASCE. This report presents state-of-the-practice set of guidelines for the determination of wind-induced forces and the design of anchor bolts for petrochemical facilities. Current codes and standards do not address many of the structures found in the petrochemical industry. As a result, engineers and petrochemical companies have independently developed procedures and techniques for handling engineering issues such as the twoØcontained in this report. A lack of standardization in the industry has led to inconsistent structural reliability, however. This volume is intended for structural design engineers familiar with design of industrial-type structures.
Download or read book Soft Target Protection written by Ladislav Hofreiter and published by Springer. This book was released on 2021-08-26 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume includes articles presented during the Advanced Research Workshop on Soft Target Protection. The book presents important topics related to the protection of vulnerable objects and spaces, called Soft Targets. The chapters published in this book are thematically assigned to the blocks as follows: Theoretical aspect of soft target protection; Blast resistance of soft targets; Counter terrorism; Technical and technological solutions for soft target protection; Scheme and organizational measures; Blast protection and Forces for soft target protection. In this book, the reader will find a wealth of information about the theoretical background for designing protection of soft targets, as well as the specifics of protecting objects in armed conflict areas. New methods and procedures applicable to the soft target protection are described.
