Download or read book Design of anchorages in concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011-01-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2006-03-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and non-cracked concrete. It further focuses on corrosion behaviour, fire resistance and characteristics with earthquakes and shocks. It finishes off with the design of fastenings according to the European Technical Approval Guideline (ETAG 001), the Final Draft of the CEN Technical Specification 'Design of fastenings for use in concrete' and the American Standards ACI 318-05, Appendix D and ACI 349-01, Appendix B.
Download or read book Design of Anchorages in Concrete written by and published by . This book was released on 2011 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide for Design of Anchorage to Concrete written by American Concrete Institute and published by . This book was released on 2011 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: This guide presents worked examples using the design provisions in ACI 318 Appendix D. Not all conditions are covered in these examples.The essentials of direct tension, direct shear, combined tension and shear, and the common situation of eccentric shear, as in a bracket or corbel, and presented.
Download or read book Strength Design of Anchorage to Concrete written by Ronald A. Cook and published by . This book was released on 1999 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchors in Concrete design and Behavior written by George A. Senkiw and published by . This book was released on 1991 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchorage Design for Petrochemical and Other Industrial Facilities written by and published by American Society of Civil Engineers. This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This title intends to serve as a source for uniformity in the design, fabrication, and installation of anchorage in petrochemical and other industrial facilities"--
Download or read book Anchorage Zone Reinforcement for Post tensioned Concrete Girders written by John Edward Breen and published by Transportation Research Board. This book was released on 1994 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bond and anchorage of embedded reinforcement Background to the fib Model Code for Concrete Structures 2010 written by fib - Fédération internationale du béton and published by fib - Fédération internationale du béton. This book was released on 2014-05-01 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the preparation for the fib Model Code for Concrete Structures 2010, task group 4.5 Bond Models undertook a major review of rules for bond and anchorage of reinforcement in the CEB-FIP Model Code 1990. This bulletin presents the outcome of that review, describes the rationale for the revisions and presents the evidence on which the revisions are based. The principle changes in MC2010 include raising the limit on concrete strength that may be used when determining bond resistance to 110MPa, introduction of a coefficient η4 to cater for different reinforcement Classes, and coverage of new construction materials including epoxy coated and headed bars. The format of design rules has been changed to permit more rational treatment of confinement from concrete cover and transverse reinforcement, the contribution of end hooks and bends for tension bars, and end bearing to compression laps. New guidance is provided covering a range of construction techniques and service environments and the influence of long term degradation. Analyses of various aspects of detailing on performance of laps and anchorages have resulted in discontinuation of the ‘proportion lapped’ factor α6, alterations to requirements of transverse reinforcement at laps, and have resolved inconsistencies in provisions for bundled bars between major national codes. Apparent inconsistencies in existing rules for lapped joints and anchorages and between the local bond/slip model and design rules are also resolved, thus allowing integration of application rules and modelling. Finally, the basis for an attempt to introduce simple detailing rules for laps and anchorages is described.
Download or read book Design and construction of prestressed ground anchorages written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1996-04-01 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchorage Design for Petrochemical Facilities written by American Society of Civil Engineers. Task Committee on Anchorage and published by Amer Society of Civil Engineers. This book was released on 2013 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This technical report presents recommendations for the design, fabrication, and installation of anchorages into concrete for petrochemical facilities.
Download or read book Wind Loads and Anchor Bolt Design for Petrochemical Facilities written by Task Committee on Anchor Bolt Design and published by ASCE Publications. This book was released on 1997-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by theØTask Committee on Wind-Induced Forces and Task Committee on Anchor Bolt Design of the Petrochemical Committee of the Energy Division of ASCE. This report presents state-of-the-practice set of guidelines for the determination of wind-induced forces and the design of anchor bolts for petrochemical facilities. Current codes and standards do not address many of the structures found in the petrochemical industry. As a result, engineers and petrochemical companies have independently developed procedures and techniques for handling engineering issues such as the twoØcontained in this report. A lack of standardization in the industry has led to inconsistent structural reliability, however. This volume is intended for structural design engineers familiar with design of industrial-type structures.
Download or read book A State of the Art Guide for Post Installed Reinforcement written by Daniel TW Looi and published by Sunway University Press. This book was released on 2022-07-22 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: A State-of-the-Art Guide for Post-Installed Reinforcement provides comprehensive coverage on installation, design, and assessment guidelines for post-installed reinforcements, a unique technology used very commonly in the construction industry. Previously published in Hong Kong, this Malaysian edition includes new EOTA technical reports and European Assessment Documents, fundamentals for post-installed reinforcements, design proposals, as well as unique design examples, all of which is specifically tailored for the Malaysian context.
Download or read book Prestressed Concrete Design written by M.K. Hurst and published by CRC Press. This book was released on 2017-12-21 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prestressed concrete is widely used in the construction industry in buildings, bridges, and other structures. The new edition of this book provides up-to-date guidance on the detailed design of prestressed concrete structures according to the provisions of the latest preliminary version of Eurocode 2: Design of Concrete Structures, DD ENV 1992-1-1: 1992. The emphasis throughout is on design - the problem of providing a structure to fulfil a given purpose - but fundamental concepts are also described in detail. All major topics are dealt with, including prestressed flat slabs, an important and growing application in the design of buildings. The text is illustrated throughout with worked examples and problems for further study. Examples are given of computer spreadsheets for typical design calculations. Prestressed Concrete Design will be a valuable guide to practising engineers, students and research workers.
Download or read book Ground Anchors and Anchored Systems written by Federal Highway Administration and published by . This book was released on 2006-08-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-practice information on the design and installation of cement-grouted ground anchors and anchored systems for highway applications. The anchored systems discussed include flexible anchored walls, slopes supported using ground anchors, landslide stabilization systems, and structures that incorporate tiedown anchors. This book draws extensively in describing issues such as subsurface investigation and laboratory testing, basic anchoring principles, ground anchor load testing, and inspection of construction materials and methods used for anchored systems. This book provides detailed information on design analyses for ground anchored systems. Topics discussed include selection of design earth pressures, ground anchor design, design of corrosion protection system for ground anchors, design of wall components to resist lateral and vertical loads, evaluation of overall anchored system stability, and seismic design of anchored systems. Also included in this book are two detailed design examples and technical specifications for ground anchors and for anchored walls.
Download or read book Load bearing behavior and design of anchorages subjected to shear and torsion loading in uncracked concrete written by Philipp R. Grosser and published by . This book was released on 2012 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
