Download or read book Design of a superconducting DC wind generator written by Liu, Yingzhen and published by KIT Scientific Publishing. This book was released on 2020-11-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trend towards larger power ratings of wind turbines asks for innovations in power generation, which requires lower weight and cost, smaller size, higher efficiency and reliability. Due to high current-carrying capability and no DC losses of superconductors, a superconducting wind generator can have a superior power to weight/volume ratio with high efficiency. The work in the book mainly focuses on the feasibility study and design of a superconducting DC wind generator.
Download or read book Design of a Superconducting DC Wind Generator written by Yingzhen Liu and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductivity for Large Scale Wind Turbines written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A conceptual design has been completed for a 10MW superconducting direct drive wind turbine generator employing low temperature superconductors for the field winding. Key technology building blocks from the GE Wind and GE Healthcare businesses have been transferred across to the design of this concept machine. Wherever possible, conventional technology and production techniques have been used in order to support the case for commercialization of such a machine. Appendices A and B provide further details of the layout of the machine and the complete specification table for the concept design. Phase 1 of the program has allowed us to understand the trade-offs between the various sub-systems of such a generator and its integration with a wind turbine. A Failure Modes and Effects Analysis (FMEA) and a Technology Readiness Level (TRL) analysis have been completed resulting in the identification of high risk components within the design. The design has been analyzed from a commercial and economic point of view and Cost of Energy (COE) calculations have been carried out with the potential to reduce COE by up to 18% when compared with a permanent magnet direct drive 5MW baseline machine, resulting in a potential COE of 0.075 $/kWh. Finally, a top-level commercialization plan has been proposed to enable this technology to be transitioned to full volume production. The main body of this report will present the design processes employed and the main findings and conclusions.
Download or read book AC Losses in High Temperature Superconductor Tapes and Cables for Power Applications written by Godfrin, Aurélien and published by KIT Scientific Publishing. This book was released on 2022-05-10 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work focuses on two topics. The first is the investigation of producing filaments on copper-stabilized coated conductors, with striations made after or before electroplating the tape. The second topic is the applicability of the striations for reducing the AC losses of cables, in particular the CORC® and RACC cables, which are made with high-temperature superconductor (HTS) striated tapes.
Download or read book Comparative Assessment of Direct Drive High Temperature Superconducting Generators in Multi megawatt Class Wind Turbines written by Ben Maples and published by . This book was released on 2010 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes. Based on the cost and performance data supplied by AMSC, HTSDD technology has good potential to compete successfully as an alternative technology to PMDD and geared technology turbines in the multi megawatt classes. In addition, data suggests the economics of HTSDD turbines improve with increasing size, although several uncertainties remain for all machines in the 6 to 10 MW class.
Download or read book DC Wind Generation Systems written by Omid Beik and published by Springer Nature. This book was released on 2020-03-04 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design and operation of DC wind systems and their integration into power grids. The chapters give an in-depth discussion on turbine conversion systems that have been adapted for DC grids and address characteristics of wind turbines when converting kinetic wind energy to electrical energy, components associated with DC systems, and the design and analysis of DC grids. Additionally, the performance of medium voltage DC (MVDC) array grid and high voltage DC (HVDC) transmission grid connected via an offshore substation with DC/DC converters are also addressed. The book examines multiphase hybrid excitation generator systems for wind turbines and discusses its design and operation for all DC systems. The book provides an insight into the state-of-the-art technological advancements for existing and futuristic wind generation schemes, and provides materials that will allow students, researchers, academics, and practicing engineers to learn, expand and complement their expertise.
Download or read book Comparative Assessment of Direct Drive High Temperature Superconducting Generators in Multi megawatt Class Wind Turbines written by Ben Maples and published by . This book was released on 2010 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes. Based on the cost and performance data supplied by AMSC, HTSDD technology has good potential to compete successfully as an alternative technology to PMDD and geared technology turbines in the multi megawatt classes. In addition, data suggests the economics of HTSDD turbines improve with increasing size, although several uncertainties remain for all machines in the 6 to 10 MW class.
Download or read book Wind Energy Handbook written by Tony Burton and published by John Wiley & Sons. This book was released on 2001-12-12 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental concerns have focused attention on the generation of electricity from clean and renewable sources wind energy has become the world's fastest growing energy source. The Wind Energy Handbook draws on the authors' collective industrial and academic experience to highlight the interdisciplinary nature of wind energy research and provide a comprehensive treatment of wind energy for electricity generation. Features include: An authoritative overview of wind turbine technology and wind farm design and development In-depth examination of the aerodynamics and performance of land-based horizontal axis wind turbines A survey of alternative machine architectures and an introduction to the design of the key components Description of the wind resource in terms of wind speed frequency distribution and the structure of turbulence Coverage of site wind speed prediction techniques Discussions of wind farm siting constraints and the assessment of environmental impact The integration of wind farms into the electrical power system, including power quality and system stability Functions of wind turbine controllers and design and analysis techniques With coverage ranging from practical concerns about component design to the economic importance of sustainable power sources, the Wind Energy Handbook will be an asset to engineers, turbine designers, wind energy consultants and graduate engineering students.
Download or read book Advances in Renewable Energies and Power Quality written by Manuel Pérez-Donsión and published by Cambridge Scholars Publishing. This book was released on 2020-02-13 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together contributions dealing with renewable energies and power quality, presented over five years of the International Conference on Renewable Energy and Power Quality (ICREPQ). It contains a selection of the best papers and original contributions presenting state-of-the-art research in the field of renewable energy sources. Including some of the leading authorities in their areas of expertise, the contributors to the volume are drawn from across the globe, with about 300 authors from 60 different countries.
Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.
Download or read book Performance of DFIG and PMSG Wind Turbines written by Kenneth E Okedu and published by CRC Press. This book was released on 2023-04-05 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to environmental pollution and climate change, the use of renewable energy sources as an alternative means of power generation is on the rise globally. This is because of their clean nature, which makes them ecofriendly with little or no pollution compared to the traditional fossil fuel power-generation power plants. Among the various renewable energy sources, wind energy is one of the most widely employed, due to its promising technology. Wind turbine technologies could be classified into two groups as follows: Fixed Speed Wind Turbines (FSWTs) and Variable Speed Wind Turbines (VSWTs). There have been tremendous improvements in wind turbine technology over the years, from FSWTs to VSWTs, as a result of fast innovations and advanced developments in power electronics. Thus, the VSWTs have better wind energy capture and conversion efficiencies, less acoustic noise and mechanical stress, and better power quality in power grids without support from external reactive power compensators due to the stochastic nature of wind energy. The two most widely employed VSWTs in wind farm development are the Doubly Fed Induction Generator (DFIG) and the Permanent Magnet Synchronous Generator (PMSG) wind turbines. In order to solve transient stability intricacies during power grid faults, this book proposes different control strategies for the DFIG and PMSG wind turbines.
Download or read book Large Scale Renewable Power Generation written by Jahangir Hossain and published by Springer Science & Business Media. This book was released on 2014-01-28 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the issues of integrating large-scale renewable power generation into existing grids. The issues covered in this book include different types of renewable power generation along with their transmission and distribution, storage and protection. It also contains the development of medium voltage converters for step-up-transformer-less direct grid integration of renewable generation units, grid codes and resiliency analysis for large-scale renewable power generation, active power and frequency control and HVDC transmission. The emerging SMES technology for controlling and integrating large-scale renewable power systems is also discussed. Since the protection issues with large-scale distributed renewable power systems are different compared to the existing protection system for one way power flow, this book includes a new protection technique for renewable generators along with the inclusion of current status of smart grid. This book is a good reference for the researchers who are working the area of renewable power generation and smart grids.
Download or read book Improved Superconducting Wire for Wind Generators written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: REACT Project: Brookhaven National Laboratory will develop a low-cost superconducting wire that could be used in high-power wind generators. Superconducting wire currently transports 600 times more electric current than a similarly sized copper wire, but is significantly more expensive. Brookhaven National Laboratory will develop a high-performance superconducting wire that can handle significantly more electrical current, and will demonstrate an advanced manufacturing process that has the potential to yield a several-fold reduction in wire costs while using a using negligible amount of rare earth material. This design has the potential to make a wind turbine generator lighter, more powerful, and more efficient, particularly for offshore applications.
Download or read book Applications of High Temperature Superconductors to Electric Power Equipment written by Swarn S. Kalsi and published by John Wiley & Sons. This book was released on 2011-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only one-stop reference to design, analysis, and manufacturing concepts for power devices utilizing HTS. High temperature superconductors (HTS) have been used for building many devices for electric grids worldwide and for large ship propulsion motors for the U.S. Navy. And yet, there has been no single source discussing theory and design issues relating to power applications of HTS—until now. This book provides design and analysis for various devices and includes examples of devices built over the last decade. Starting with a complete overview of HTS, the subsequent chapters are dedicated to specific devices: cooling and thermal insulation systems; rotating AC and DC machines; transformers; fault current limiters; power cables; and Maglev transport. As applicable, each chapter provides a history of the device, principles, configuration, design and design challenges, prototypes, and manufacturing issues, with each ending with a summary of the material covered. The design analysis and design examples provide critical insight for readers to successfully design their own devices. Original equipment manufacturer (OEM) designers, industry and utilities users, universities and defense services research groups, and senior/postgraduate engineering students and instructors will rely on this resource. "HTS technology reduces electric losses and increases the efficiency of power equipment. This book by Swarn Kalsi, a leading expert on the HTS subject, provides a survey of the HTS technology and the design rules, performance analyses, and manufacturing concepts for power application-related devices. It compares conventional and HTS technology approaches for device design and provides significant examples of devices utilizing the HTS technology today. The book is useful for a broad spectrum of professionals worldwide: students, teaching staff, and OEM designers as well as users in industry and electric utilities." —Professor Dr. Rolf Hellinger, Research and Technologies Corporate Technology, Siemens AG
Download or read book Power Electronic Converter Configuration and Control for DC Microgrid Systems written by Jens Bo Holm-Nielsen and published by MDPI. This book was released on 2020-11-13 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DC/AC microgrid system is a crucial empowering technology for the integration of various types of renewable energy sources (RES) accompanied by a smart control approach to enhance the system reliability and efficiency. This book presents cutting-edge technology developments and recent investigations performed with the help of power electronics. Large-scale renewable energy integration presents challenges and issues for power grids. In particular, these issues include microgrid adaption to RES, AC machines, the new configuration of AC/DC converters, and electrification of domestic needs with optimal cost expenses from domestic standalone microgrids. Furthermore, this book elaborates cutting-edge developments in electric vehicle fast charging configuration, battery management, and control schemes with renewable energies through hardware-in-loop testing and validation for performance durability in real-time application. Overall, the book covers the diverse field of microgrids, allowing readers to adopt new technologies and prepare for future power demands with sustainable green engineering.
Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1981 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
