Download or read book Medical Biosensors for Point of Care POC Applications written by Roger Narayan and published by Woodhead Publishing. This book was released on 2016-08-21 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical Biosensors for Point of Care (POC) Applications discusses advances in this important and emerging field which has the potential to transform patient diagnosis and care. Part 1 covers the fundamentals of medical biosensors for point-of-care applications. Chapters in part 2 go on to look at materials and fabrication of medical biosensors while the next part looks at different technologies and operational techniques. The final set of chapters provide an overview of the current applications of this technology. Traditionally medical diagnostics have been dependent on sophisticated technologies which only trained professionals were able to operate. Recent research has focused on creating point-of-care diagnostic tools. These biosensors are miniaturised, portable, and are designed to be used at the point-of-care by untrained individuals, providing real-time and remote health monitoring. - Provides essential knowledge for designers and manufacturers of biosensors for point-of-care applications - Provides comprehensive coverage of the fundamentals, materials, technologies, and applications of medical biosensors for point-of-care applications - Includes contributions from leading international researchers with extensive experience in developing medical biosensors - Discusses advances in this important and emerging field which has the potential to transform patient diagnosis and care

Download or read book Proceedings of 4th International Conference on Frontiers in Computing and Systems written by Dipak Kumar Kole and published by Springer Nature. This book was released on with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microscale Acoustofluidics written by Thomas Laurell and published by Royal Society of Chemistry. This book was released on 2014-12-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manipulation of cells and microparticles within microfluidic systems using external forces is valuable for many microscale analytical and bioanalytical applications. Acoustofluidics is the ultrasound-based external forcing of microparticles with microfluidic systems. It has gained much interest because it allows for the simple label-free separation of microparticles based on their mechanical properties without affecting the microparticles themselves. Microscale Acoustofluidics provides an introduction to the field providing the background to the fundamental physics including chapters on governing equations in microfluidics and perturbation theory and ultrasound resonances, acoustic radiation force on small particles, continuum mechanics for ultrasonic particle manipulation, and piezoelectricity and application to the excitation of acoustic fields for ultrasonic particle manipulation. The book also provides information on the design and characterization of ultrasonic particle manipulation devices as well as applications in acoustic trapping and immunoassays. Written by leading experts in the field, the book will appeal to postgraduate students and researchers interested in microfluidics and lab-on-a-chip applications.

Download or read book Encyclopedia of Microfluidics and Nanofluidics written by Dongqing Li and published by Springer Science & Business Media. This book was released on 2008-08-06 with total page 2242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering all aspects of transport phenomena on the nano- and micro-scale, this encyclopedia features over 750 entries in three alphabetically-arranged volumes including the most up-to-date research, insights, and applied techniques across all areas. Coverage includes electrical double-layers, optofluidics, DNC lab-on-a-chip, nanosensors, and more.

Download or read book Digital Microfluidic Biochips written by Krishnendu Chakrabarty and published by CRC Press. This book was released on 2018-10-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Microfluidic Biochips focuses on the automated design and production of microfluidic-based biochips for large-scale bioassays and safety-critical applications. Bridging areas of electronic design automation with microfluidic biochip research, the authors present a system-level design automation framework that addresses key issues in the design, analysis, and testing of digital microfluidic biochips. The book describes a new generation of microfluidic biochips with more complex designs that offer dynamic reconfigurability, system scalability, system integration, and defect tolerance. Part I describes a unified design methodology that targets design optimization under resource constraints. Part II investigates cost-effective testing techniques for digital microfluidic biochips that include test resource optimization and fault detection while running normal bioassays. Part III focuses on different reconfiguration-based defect tolerance techniques designed to increase the yield and dependability of digital microfluidic biochips. Expanding upon results from ongoing research on CAD for biochips at Duke University, this book presents new design methodologies that address some of the limitations in current full-custom design techniques. Digital Microfluidic Biochips is an essential resource for achieving the integration of microfluidic components in the next generation of system-on-chip and system-in-package designs.

Download or read book Microfluidics and Lab on a Chip written by Andreas Manz and published by Royal Society of Chemistry. This book was released on 2020-09-24 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an affordable, easy-to-read textbook that introduces microfluidics to undergraduate and postgraduate students, this concise book will provide a broad overview of the important theoretical and practical aspects of microfluidics and lab-on-a-chip, as well as its applications.

Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi

Download or read book Microfluidics written by Yu Song and published by John Wiley & Sons. This book was released on 2018-05-07 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals, and fabrication techniques for microfluidic devices. The book also comprehensively covers the fluid mechanics, physics and chemistry as well as applications in such different fields as detection and synthesis of inorganic and organic materials. A useful reference for non-specialists and a basic guideline for research scientists and technicians already active in this field or intending to work in microfluidics.

Download or read book Microfluidic Very Large Scale Integration VLSI written by Paul Pop and published by Springer. This book was released on 2016-02-08 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art techniques for the modeling, simulation, testing, compilation and physical synthesis of mVLSI biochips. The authors describe a top-down modeling and synthesis methodology for the mVLSI biochips, inspired by microelectronics VLSI methodologies. They introduce a modeling framework for the components and the biochip architecture, and a high-level microfluidic protocol language. Coverage includes a topology graph-based model for the biochip architecture, and a sequencing graph to model for biochemical application, showing how the application model can be obtained from the protocol language. The techniques described facilitate programmability and automation, enabling developers in the emerging, large biochip market.

Download or read book Error Tolerant Biochemical Sample Preparation with Microfluidic Lab on Chip written by Sudip Poddar and published by CRC Press. This book was released on 2022-07-27 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidic biochips have gained prominence due to their versatile applications to biochemistry and health-care domains such as point-of-care clinical diagnosis of tropical and cardiovascular diseases, cancer, diabetes, toxicity analysis, and for the mitigation of the global HIV crisis, among others. Microfluidic Lab-on-Chips (LoCs) offer a convenient platform for emulating various fluidic operations in an automated fashion. However, because of the inherent uncertainty of fluidic operations, the outcome of biochemical experiments performed on-chip can be erroneous even if the chip is tested a priori and deemed to be defect-free. This book focuses on the issues encountered in reliable sample preparation with digital microfluidic biochips (DMFBs), particularly in an error-prone environment. It presents state-of-the-art error management techniques and underlying algorithmic challenges along with their comparative discussions. Describes a comprehensive framework for designing a robust and error-tolerant biomedical system which will help in migrating from cumbersome medical laboratory tasks to small-sized LOC-based systems Presents a comparative study on current error-tolerant strategies for robust sample preparation using DMFBs and reports on efficient algorithms for error-tolerant sample dilution using these devices Illustrates how algorithmic engineering, cyber-physical tools, and software techniques are helpful in implementing fault tolerance Covers the challenges associated with design automation for biochemical sample preparation Teaches how to implement biochemical protocols using software-controlled microfluidic biochips Interdisciplinary in its coverage, this reference is written for practitioners and researchers in biochemical, biomedical, electrical, computer, and mechanical engineering, especially those involved in LOC or bio-MEMS design.

Download or read book Micro Total Analysis Systems 2001 written by J. Michael Ramsey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Conference on Micro Total Analysis Systems, also known as JlTAS 2001, will highlight the latest exciting events in the world ofminiaturized devices and systems for performing chemical and biochemical experimentation This conference has become mandatory for those of us working in this field as it is indeed helping to define our discipline. We are grateful to the people of the MESA Research Institute of the University of Twente, particularly Piet Bergveld and Albert van den Berg, for starting this meeting in 1994. Their original intention was for the JlTAS meeting to be a small informal workshop. This workshop flavor was sustained through the second meeting held in Basel in 1996, but already in 1998 at the third meeting in Banff it was clear that the "workshop" had become a conference with 420 attendees. It was due to this clearly growing interest in microchemical systems that it was decided we should consider gradually moving toward an annual format and prepare for the possibility that the meeting would increase in popularity. Albert van den Berg was still yearning for a workshop at the JlTAS 2000 meeting and planned a single session format. Again there was a large increase in submitted abstracts (more than 230 total) and a further increase in attendance. The JlTAS steering committee again agreed that we would have to prepare to address the demand the meeting was receiving.

Download or read book Ship s Ballast Water Analysis written by Yongxin Song and published by CRC Press. This book was released on 2024-11-29 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Convention for the Control and Management of Ship's Ballast Water and Sediments mandates ships undertake ballast water treatment to reduce, remove or kill organisms of concern before being allowed to discharge their water. This book introduces technologies and devices that are used for the analysis of treated ballast water. Emphasis is placed on the separation, manipulation, detection, counting, and sizing of microalgae in a microfluidic chip which shows great potential for developing miniatured analysis devices. Features: Introduces technologies and devices related to analysis of treated ballast water. Identifies the need for reliable devices to monitor viable organisms in treated ship’s ballast waters. Covers recent research in microfluidics-based cell sorting and developments of lab-on-chip devices. Addresses requirements of the Convention to be implemented by 2024. Reviews electric and optical-based methods for organism counting, sizing, and viability differentiation. This book is aimed at researchers and professionals in marine engineering, ocean technology, environmental engineering, and microfluidics.

Download or read book Handbook of Research on Swarm Intelligence in Engineering written by Bhattacharyya, Siddhartha and published by IGI Global. This book was released on 2015-04-30 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Swarm Intelligence has recently emerged as a next-generation methodology belonging to the class of evolutionary computing. As a result, scientists have been able to explain and understand real-life processes and practices that previously remained unexplored. The Handbook of Research on Swarm Intelligence in Engineering presents the latest research being conducted on diverse topics in intelligence technologies such as Swarm Intelligence, Machine Intelligence, Optical Engineering, and Signal Processing with the goal of advancing knowledge and applications in this rapidly evolving field. The enriched interdisciplinary contents of this book will be a subject of interest to the widest forum of faculties, existing research communities, and new research aspirants from a multitude of disciplines and trades.

Download or read book 3D Printed Microfluidic Devices written by Savas Tasoglu and published by MDPI. This book was released on 2019-01-10 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "3D Printed Microfluidic Devices" that was published in Micromachines

Download or read book Handbook of sol gel science and technology 3 Applications of sol gel technology written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:

Download or read book Proceedings of the 4th International Conference on Nanochannels Microchannels and Minichannels 2006 written by and published by . This book was released on 2006 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Microfluidic Technologies for Energy and Environmental Applications written by Yong Ren and published by BoD – Books on Demand. This book was released on 2020-05-20 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics have aroused a new surge of interest in recent years in environmental and energy areas, and inspired novel applications to tackle the worldwide challenges for sustainable development. This book aims to present readers with a valuable compendium of significant advances in applying the multidisciplinary microfluidic technologies to address energy and environmental problems in a plethora of areas such as environmental monitoring and detection, new nanofluid application in traditional mechanical manufacturing processes, development of novel biosensors, and thermal management. This book will provide a new perspective to the understanding of the ever-growing importance of microfluidics.