Download or read book Design Modelling Fabrication Testing of a Miniature Piezoelectric based EMF Energy Harvester written by Tim E. Pollock and published by . This book was released on 2014 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensing applications have extended into power transmission line monitoring applications. Minimal power consumption of sensor electronics have enabled kinetic energy harvesting systems to provides a means of self sustainability in the form of parasitic energy harvesting from power transmission lines. With this goal in mind, a miniature piezoelectric bimorph cantilever harvester has been developed using a magnetic tip mass which interacts with the oscillating magnetic flux surrounding power transmission wires. The focus of this thesis is develop an analytical model which can be used to optimize the amount of piezoelectric material to support sensory electronics. Special emphasis has also been placed on magnet orientation and geometry to ensure optimal magnetic flux interaction between input and output mechanisms. A single prototype harvester is designed with an arbitrary piezoelectric material length and experimentally validated at different conductor wire currents. The analytical model shows excellent agreement in frequency prediction for the prototype tested. Two damping techniques are used to experimentally extract modal damping ratios to predict peak mechanical and electrical responses at resonance frequencies. The miniature prototype design is less than 30 mm in length with only 10 mm piezoelectric material to produce a total volume of 154 10−12 cm3. The power output is measured at 174.1 [mu]W of power when positioned over top a 10 AWG copper conductor a distance of 6 mm with approximately 16 Amps of current passing though the conductor.

Download or read book Design and Development of MEMS based Guided Beam Type Piezoelectric Energy Harvester written by Shanky Saxena and published by Springer Nature. This book was released on 2021-04-06 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents device design, layout design, FEM analysis, device fabrication, and packaging and testing of MEMS-based piezoelectric vibration energy harvesters. It serves as a complete guide from design, FEM, and fabrication to characterization. Each chapter of this volume illustrates key insight technologies through images. The book showcases different technologies for energy harvesting and the importance of energy harvesting in wireless sensor networks. The design, simulation, and comparison of three types of structures – single beam cantilever structure, cantilever array structure, and guided beam structure have also been reported in one of the chapters. In this volume, an elaborate characterization of two-beam and four-beam fabricated devices has been carried out. This characterization includes structural, material, morphological, topological, dynamic, and electrical characterization of the device. The volume is very concise, easy to understand, and contains colored images to understand the details of each process.

Download or read book Design and Development of MEMS Based Guided Beam Type Piezoelectric Energy Harvester written by Shanky Saxena and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents device design, layout design, FEM analysis, device fabrication, and packaging and testing of MEMS-based piezoelectric vibration energy harvesters. It serves as a complete guide from design, FEM, and fabrication to characterization. Each chapter of this volume illustrates key insight technologies through images. The book showcases different technologies for energy harvesting and the importance of energy harvesting in wireless sensor networks. The design, simulation, and comparison of three types of structures - single beam cantilever structure, cantilever array structure, and guided beam structure have also been reported in one of the chapters. In this volume, an elaborate characterization of two-beam and four-beam fabricated devices has been carried out. This characterization includes structural, material, morphological, topological, dynamic, and electrical characterization of the device. The volume is very concise, easy to understand, and contains colored images to understand the details of each process. .

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Design of Test Bench Apparatus for Piezoelectric Energy Harvesters written by You Chang Yoon and published by . This book was released on 2013 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the design and analysis of an experimental test bench for the characterization of piezoelectric microelectromechanical system (MEMS) energy harvester being developed by the Micro & Nano Systems Laboratory research group at MIT. Piezoelectric MEMS energy harvesters are micro-devices that are able to harvest energy from their ambient vibrations using piezoelectric material property, and many different designs are being researched by the Micro & Nano Systems Laboratory. In order to analyze the different designs, it is crucial to have a flexible test bench, and the test bench created in this thesis allows data to be gathered easily from different energy harvesters. After the test bench is designed and created, it is used to excite a linear cantilever beam energy harvester system at different frequencies and values for open circuit voltage, resonance frequency, and maximum power are calculated from the collected experimental data. In addition, theory behind linear and nonlinear energy harvester systems is investigated and important definitions, characteristics, and equations are summarized in this thesis.

Download or read book Energy Scavenging for Wireless Sensor Networks written by Shad Roundy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast reduction in size and power consumption of CMOS circuitry has led to a large research effort based around the vision of wireless sensor networks. The proposed networks will be comprised of thousands of small wireless nodes that operate in a multi-hop fashion, replacing long transmission distances with many low power, low cost wireless devices. The result will be the creation of an intelligent environment responding to its inhabitants and ambient conditions. Wireless devices currently being designed and built for use in such environments typically run on batteries. However, as the networks increase in number and the devices decrease in size, the replacement of depleted batteries will not be practical. The cost of replacing batteries in a few devices that make up a small network about once per year is modest. However, the cost of replacing thousands of devices in a single building annually, some of which are in areas difficult to access, is simply not practical. Another approach would be to use a battery that is large enough to last the entire lifetime of the wireless sensor device. However, a battery large enough to last the lifetime of the device would dominate the overall system size and cost, and thus is not very attractive. Alternative methods of powering the devices that will make up the wireless networks are desperately needed.

Download or read book Energy Harvesting and Energy Efficiency written by Nicu Bizon and published by Springer. This book was released on 2017-03-09 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents basic and advanced concepts for energy harvesting and energy efficiency, as well as related technologies, methods, and their applications. The book provides up-to-date knowledge and discusses the state-of-the-art equipment and methods used for energy harvesting and energy efficiency, combining theory and practical applications. Containing over 200 illustrations and problems and solutions, the book begins with overview chapters on the status quo in this field. Subsequent chapters introduce readers to advanced concepts and methods. In turn, the final part of the book is dedicated to technical strategies, efficient methods and applications in the field of energy efficiency, which also makes it of interest to technicians in industry. The book tackles problems commonly encountered using basic methods of energy harvesting and energy efficiency, and proposes advanced methods to resolve these issues. All the methods proposed have been validated through simulation and experimental results. These “hot topics” will continue to be of interest to scientists and engineers in future decades and will provide challenges to researchers around the globe as issues of climate change and changing energy policies become more pressing. Here, readers will find all the basic and advanced concepts they need. As such, it offers a valuable, comprehensive guide for all students and practicing engineers who wishing to learn about and work in these fields.

Download or read book Energy Harvesting written by Alireza Khaligh and published by CRC Press. This book was released on 2017-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Also called energy scavenging, energy harvesting captures, stores, and uses "clean" energy sources by employing interfaces, storage devices, and other units. Unlike conventional electric power generation systems, renewable energy harvesting does not use fossil fuels and the generation units can be decentralized, thereby significantly reducing transmission and distribution losses. But advanced technical methods must be developed to increase the efficiency of devices in harvesting energy from environmentally friendly, "green" resources and converting them into electrical energy. Recognizing this need, Energy Harvesting: Solar, Wind, and Ocean Energy Conversion Systems describes various energy harvesting technologies, different topologies, and many types of power electronic interfaces for stand-alone utilization or grid connection of energy harvesting applications. Along with providing all the necessary concepts and theoretical background, the authors develop simulation models throughout the text to build a practical understanding of system analysis and modeling. With a focus on solar energy, the first chapter discusses the I−V characteristics of photovoltaic (PV) systems, PV models and equivalent circuits, sun tracking systems, maximum power point tracking systems, shading effects, and power electronic interfaces for grid-connected and stand-alone PV systems. It also presents sizing criteria for applications and modern solar energy applications, including residential, vehicular, naval, and space applications. The next chapter reviews different types of wind turbines and electrical machines as well as various power electronic interfaces. After explaining the energy generation technologies, optimal operation principles, and possible utilization techniques of ocean tidal energy harvesting, the book explores near- and offshore approaches for harvesting the kinetic and potential energy of ocean waves. It also describes the required absorber, turbine, and generator types, along with the power electronic interfaces for grid connection and commercialized ocean wave energy conversion applications. The final chapter deals with closed, open, and hybrid-cycle ocean thermal energy conversion systems.

Download or read book Wind Energy Harvesting written by Ravi Kishore and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-04-23 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental concepts required for the development of an efficient small-scale wind turbine. For centuries, engineers and scientists have used wind turbines of all shapes and sizes to harvest wind energy. Large-scale wind turbines have been successful at producing great amounts of power when deployed in sites with vast, open space, such as in fi elds or in offshore waters. For environments with limited space, such as dense urban environments, small-scale wind turbines are an attractive alternative for taking advantage of the ubiquity of wind. However, many of today’s tools for aerodynamic design and analysis were originally developed for large-scale turbines and do not scale down to these smaller devices. Arranged in a systematic and comprehensive manner, complete with supporting examples, Wind Energy Harvesting: Micro- To Small-Scale Turbines is a useful reference for undergraduate and graduate level classes on energy harvesting, sustainable energy, and fl uid dynamics, and an introduction to the field for non-technical readers.

Download or read book Handbook of Energy Harvesting Power Supplies and Applications written by Peter Spies and published by CRC Press. This book was released on 2015-06-01 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals and principles of energy harvesting and provides the necessary theory and background to develop energy harvesting power supplies. It explains the overall system design and gives quantitative assumptions on environmental energy. It explains different system blocks for an energy harvesting power supply and the trade-offs. The text covers in detail different energy transducer technologies such as piezoelectric, electrodynamic, and thermoelectric generators and solar cells from the material to the component level and explains the appropriate power management circuits required in these systems. Furthermore, it describes and compares storage elements such as secondary batteries and supercapacitors to select the most appropriate one for the application. Besides power supplies that use ambient energy, the book presents systems that use electromagnetic fields in the radio frequency range. Finally, it discusses different application fields and presents examples of self-powered electronic systems to illustrate the content of the preceding chapters.

Download or read book Vibration Control written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibrations are a part of our environment and daily life. Many of them are useful and are needed for many purposes, one of the best example being the hearing system. Nevertheless, vibrations are often undesirable and have to be suppressed or reduced, as they may be harmful to structures by generating damages or compromise the comfort of users through noise generation of mechanical wave transmission to the body. the purpose of this book is to present basic and advanced methods for efficiently controlling the vibrations and limiting their effects. Open-access publishing is an extraordinary opportunity for a wide dissemination of high quality research. This book is not an exception to this, and I am proud to introduce the works performed by experts from all over the world.

Download or read book Advances in Ceramics written by Costas Sikalidis and published by BoD – Books on Demand. This book was released on 2011-09-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book consists of twenty-four chapters divided into three sections. Section I includes fourteen chapters in electric and magnetic ceramics which deal with modern specific research on dielectrics and their applications, on nanodielectrics, on piezoceramics, on glass ceramics with para-, anti- or ferro-electric active phases, of varistors ceramics and magnetic ceramics. Section II includes seven chapters in bioceramics which include review information and research results/data on biocompatibility, on medical applications of alumina, zirconia, silicon nitride, ZrO2, bioglass, apatite-wollastonite glass ceramic and b-tri-calcium phosphate. Section III includes three chapters in applications of ceramics in environmental improvement and protection, in water cleaning, in metal bearing wastes stabilization and in utilization of wastes from ceramic industry in concrete and concrete products.

Download or read book Energy Harvesting Technologies written by Shashank Priya and published by Springer Science & Business Media. This book was released on 2008-11-28 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Harvesting Technologies provides a cohesive overview of the fundamentals and current developments in the field of energy harvesting. In a well-organized structure, this volume discusses basic principles for the design and fabrication of bulk and MEMS based vibration energy systems, theory and design rules required for fabrication of efficient electronics, in addition to recent findings in thermoelectric energy harvesting systems. Combining leading research from both academia and industry onto a single platform, Energy Harvesting Technologies serves as an important reference for researchers and engineers involved with power sources, sensor networks and smart materials.

Download or read book Robotic Tactile Sensing written by Ravinder S. Dahiya and published by Springer Science & Business Media. This book was released on 2012-07-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future robots are expected to work closely and interact safely with real-world objects and humans alike. Sense of touch is important in this context, as it helps estimate properties such as shape, texture, hardness, material type and many more; provides action related information, such as slip detection; and helps carrying out actions such as rolling an object between fingers without dropping it. This book presents an in-depth description of the solutions available for gathering tactile data, obtaining aforementioned tactile information from the data and effectively using the same in various robotic tasks. The efforts during last four decades or so have yielded a wide spectrum of tactile sensing technologies and engineered solutions for both intrinsic and extrinsic touch sensors. Nowadays, new materials and structures are being explored for obtaining robotic skin with physical features like bendable, conformable, and stretchable. Such features are important for covering various body parts of robots or 3D surfaces. Nonetheless, there exist many more hardware, software and application related issues that must be considered to make tactile sensing an effective component of future robotic platforms. This book presents an in-depth analysis of various system related issues and presents the trade-offs one may face while developing an effective tactile sensing system. For this purpose, human touch sensing has also been explored. The design hints coming out of the investigations into human sense of touch can be useful in improving the effectiveness of tactile sensory modality in robotics and other machines. Better integration of tactile sensors on a robot’s body is prerequisite for the effective utilization of tactile data. The concept of semiconductor devices based sensors is an interesting one, as it allows compact and fast tactile sensing systems with capabilities such as human-like spatio-temporal resolution. This book presents a comprehensive description of semiconductor devices based tactile sensing. In particular, novel Piezo Oxide Semiconductor Field Effect Transistor (POSFET) based approach for high resolution tactile sensing has been discussed in detail. Finally, the extension of semiconductors devices based sensors concept to large and flexile areas has been discussed for obtaining robotic or electronic skin. With its multidisciplinary scope, this book is suitable for graduate students and researchers coming from diverse areas such robotics (bio-robots, humanoids, rehabilitation etc.), applied materials, humans touch sensing, electronics, microsystems, and instrumentation. To better explain the concepts the text is supported by large number of figures.

Download or read book A CMOS Self Powered Front End Architecture for Subcutaneous Event Detector Devices written by Jordi Colomer-Farrarons and published by Springer Science & Business Media. This book was released on 2011-02-17 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: A CMOS Self-Powered Front-End Architecture for Subcutaneous Event-Detector Devices presents the conception and prototype realization of a Self-Powered architecture for subcutaneous detector devices. The architecture is designed to work as a true/false (event detector) or threshold level alarm of some substances, ions, etc... that are detected through a three-electrodes amperometric BioSensor approach. The device is envisaged as a Low-Power subcutaneous implantable application powered by an inductive link, one emitter antenna at the external side of the skin and the receiver antenna under the skin. The sensor is controlled with a Potentiostat circuit and then, a post-processing unit detects the desired levels and activates the transmission via a backscattering method by the inductive link. All the instrumentation, except the power module, is implemented in the so called BioChip. Following the idea of the powering link to harvest energy of the magnetic induced link at the implanted device, a Multi-Harvesting Power Chip (MHPC) has been also designed.

Download or read book Piezoelectric Ceramics written by Bernard Jaffe and published by Elsevier. This book was released on 2012-12-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoelectric Ceramics focuses on the relationship between piezoelectricity and ferroelectricity as they apply to ceramics, taking into consideration the properties of materials that are being used and possibly be used in the industries. Composed of 12 chapters, the book starts by tracing the history of piezoelectricity and how this affects ceramics. The different measurement techniques are discussed, including dielectric, ferroelectric, and piezoelectric measurements. The book proceeds by discussing Perovskite structure and barium titanate. Covered areas include electric field, piezoelectric properties, particle size effect, and dielectric strength. The properties, compositions, and reactions of various perovskites are discussed. Numerical analyses are presented in this regard. The book also offers interpretations of the experiments conducted. The discussions end with the processes involved in the manufacture and applications of piezoelectric ceramics. Concerns in manufacturing include calcination, grinding, mixing, electroding, firing, and quality control. Piezolectric ceramics are applied in air transducers, instrument transducers, delay line transducers, underwater sound ultrasonic power, and wave filters. The book is important for readers interested in doing research on ceramics.

Download or read book Energy Harvesting Systems written by Tom J. Kaźmierski and published by Springer Science & Business Media. This book was released on 2010-11-01 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kinetic energy harvesting converts movement or vibrations into electrical energy, enables battery free operation of wireless sensors and autonomous devices and facilitates their placement in locations where replacing a battery is not feasible or attractive. This book provides an introduction to operating principles and design methods of modern kinetic energy harvesting systems and explains the implications of harvested power on autonomous electronic systems design. It describes power conditioning circuits that maximize available energy and electronic systems design strategies that minimize power consumption and enable operation. The principles discussed in the book will be supported by real case studies such as battery-less monitoring sensors at water waste processing plants, embedded battery-less sensors in automotive electronics and sensor-networks built with ultra-low power wireless nodes suitable for battery-less applications.