Download or read book Millimeter Wave Integrated Circuits written by Mladen Božanić and published by Springer Nature. This book was released on 2020-03-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book explores the methodologies that are used for effective research, design and innovation in the vast field of millimeter-wave circuits, and describes how these have to be modified to fit the uniqueness of high-frequency nanoelectronics design. Each chapter focuses on a specific research challenge related to either small form factors or higher operating frequencies. The book first examines nanodevice scaling and the emerging electronic design automation tools that can be used in millimeter-wave research, as well as the singular challenges of combining deep-submicron and millimeter-wave design. It also demonstrates the importance of considering, in the millimeter-wave context, system-level design leading to differing packaging options. Further, it presents integrated circuit design methodologies for all major transceiver blocks typically employed at millimeter-wave frequencies, as these methodologies are normally fundamentally different from the traditional design methodologies used in analogue and lower-frequency electronics. Lastly, the book discusses the methodologies of millimeter-wave research and design for extreme or harsh environments, rebooting electronics, the additional opportunities for terahertz research, and the main differences between the approaches taken in millimeter-wave research and terahertz research.

Download or read book Millimeter Wave Integrated Circuits written by Eoin Carey and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Millimeter-Wave Integrated Circuits delivers a detailed overview of MMIC design, specifically focusing on designs for the millimeter-wave (mm-wave) frequency range. The scope of the book is broad, spanning detailed discussions of high-frequency materials and technologies, high-frequency devices, and the design of high-frequency circuits. The design material is supplemented as appropriate by theoretical analyses. The broad scope of the book gives the reader a good theoretical and practical understanding of mm-wave circuit design. It is best-suited for both undergraduate students who are reading or studying high frequency circuit design and postgraduate students who are specializing in the mm-wave field.

Download or read book Design Methodology for Millimeter Wave Integrated Circuits written by Raffaele Roberto Severino and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest towards millimeter waves has rapidly grown up during the last few years, leading to the development of a large number of potential applications in the millimeter wave band, such as WPANs and high data rate wireless communications at 60GHz, short and long range radar at 77-79GHz, and imaging systems at 94GHz.Furthermore, the high frequency performances of silicon active devices (bipolar and CMOS) have dramatically increased featuring both fT and fmax close or even higher than 200GHz. As a consequence, modern silicon technologies can now address the demand of low-cost and high-volume production of systems and circuits operating within the millimeter wave range. Nevertheless, millimeter wave design still requires special techniques and methodologies to overcome a large number of constraints which appear along with the augmentation of the operative frequency.The aim of this thesis is to define a design methodology for integrated circuits operating at millimeter wave and to provide an experimental validation of the methodology, as exhaustive as possible, focusing on the design of low noise amplifiers (LNAs) as a case of study.Several examples of LNAs, operating at 60, 80, and 94 GHz, have been realized. All the tested circuits exhibit performances in the state of art. In particular, a good agreement between measured data and post-layout simulations has been repeatedly observed, demonstrating the exactitude of the proposed design methodology and its reliability over the entire millimeter wave spectrum. A particular attention has been addressed to the implementation of inductors as lumped devices and - in order to evaluate the benefits of the lumped design - two versions of a single-stage 80GHz LNA have been realized using, respectively, distributed transmission lines and lumped inductors. The direct comparison of these circuits has proved that the two design approaches have the same potentialities. As a matter of fact, design based on lumped inductors instead of distributed elements is to be preferred, since it has the valuable advantage of a significant reduction of the circuit dimensions.Finally, the design of an 80GHz front-end and the co-integration of a LNA with an integrated antenna are also considered, opening the way to the implementation a fully integrated receiver.

Download or read book Specific Methodology for the Design of New Monolithic Millimeter Wave Integrated Circuits Combination of Several Simulation and Modeling Tools written by and published by . This book was released on 1906 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of new millimeter wave monolithic integrated circuits needs the availability of accurate model tools such as physical simulations and experimental parameters extraction methods. Accurate electrical models have been built even in the difficult case of submicrometer dual gate pseudomorphic HEMTs. Their validity has been clearly demonstrated by the design of 60 GHz mixers.

Download or read book Microwave and Millimeter Wave Circuits and Systems written by Apostolos Georgiadis and published by John Wiley & Sons. This book was released on 2012-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.

Download or read book Design of CMOS Millimeter Wave and Terahertz Integrated Circuits with Metamaterials written by Hao Yu and published by CRC Press. This book was released on 2015-10-19 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows that with the use of metamaterials, one can have coherent THz signal generation, amplification, transmission, and detection for phase-arrayed CMOS transistors with significantly improved performance. Offering detailed coverage from device to system, the book describes the design and application of metamaterials in actual CMOS integrated circuits, includes real circuit examples and chip demonstrations with measurement results, and also evaluates system performance after CMOS-based system-on-chip integration. The book reflects the latest research progress and provides a state-of-the-art reference on CMOS-based metamaterial devices and mm-wave and THz systems.

Download or read book Ultra High Speed CMOS Circuits written by Sam Gharavi and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the CMOS-based millimeter wave circuits and devices and presents methods and design techniques to use CMOS technology for circuits operating beyond 100 GHz. Coverage includes a detailed description of both active and passive devices, including modeling techniques and performance optimization. Various mm-wave circuit blocks are discussed, emphasizing their design distinctions from low-frequency design methodologies. This book also covers a device-oriented circuit design technique that is essential for ultra high speed circuits and gives some examples of device/circuit co-design that can be used for mm-wave technology.

Download or read book Millimeter Wave Circuits for 5G and Radar written by Gernot Hueber and published by Cambridge University Press. This book was released on 2019-06-20 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the concepts, architectures, components, tools, and techniques needed to design millimeter-wave circuits for current and emerging wireless system applications. Focusing on applications in 5G, connectivity, radar, and more, leading experts in radio frequency integrated circuit (RFIC) design provide a comprehensive treatment of cutting-edge physical-layer technologies for radio frequency (RF) transceivers - specifically RF, analog, mixed-signal, and digital circuits and architectures. The full design chain is covered, from system design requirements through to building blocks, transceivers, and process technology. Gain insight into the key novelties of 5G through authoritative chapters on massive MIMO and phased arrays, and learn about the very latest technology developments, such as FinFET logic process technology for RF and millimeter-wave applications. This is an essential reading and an excellent reference for high-frequency circuit designers in both academia and industry.

Download or read book Mm wave Circuit Design in 16nm FinFET for 6G Applications written by Bart Philippe and published by Springer Nature. This book was released on 2022-09-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the challenges of designing mm-wave circuits in 16nm FinFET, from the elementary transistor level to a measured D-band transmitter. The design of crucial building blocks such as oscillators and power amplifiers are covered through theoretical limitations, design methodology and measurement. Offers first book on design of mm-wave circuits above 100GHz in an advanced 16nm FinFET digital technology; Covers fundamentals of transistor layout, circuit implementation and measurements; Provides single-source reference to information otherwise only available in disparate literature.

Download or read book Digitally Assisted Fully Integrated Wideband Transmitters for High Speed Millimeter Wave Wireless Communication Links written by David del Rio and published by Springer. This book was released on 2018-07-07 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents design methods and considerations for digitally-assisted wideband millimeter-wave transmitters. It addresses comprehensively both RF design and digital implementation simultaneously, in order to design energy- and cost-efficient high-performance transmitters for mm-wave high-speed communications. It covers the complete design flow, from link budget assessment to the transistor-level design of different RF front-end blocks, such as mixers and power amplifiers, presenting different alternatives and discussing the existing trade-offs. The authors also analyze the effect of the imperfections of these blocks in the overall performance, while describing techniques to correct and compensate for them digitally. Well-known techniques are revisited, and some new ones are described, giving examples of their applications and proving them in real integrated circuits.

Download or read book Microwave and Millimeter Wave Chips Based on Thin Film Integrated Passive Device Technology written by Yongle Wu and published by Springer Nature. This book was released on 2023-06-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book adopts the latest academic achievements of microwave and millimeter-wave chips based on thin-film integrated passive device technology as specific cases. Coherent processes of basic theories and design implementations of microwave and millimeter-wave chips are presented in detail. It forms a complete system from design theory, circuit simulation, full-wave electromagnetic simulation, and fabrication to measurement. Five representative microwave and millimeter-wave passive chips based on TFIPD technology are taken as examples to demonstrate the complete process from theory, design, simulation, fabrication, and measurement, which is comprehensive, systematical, and easy to learn and understand, convenient to operate, and close to the practical application. This book is mainly aimed at the design and simulation of microwave and millimeter-wave chips based on thin-film integrated passive device technology. On the basis of specific cases, it introduces the whole process from theory, design, simulation, optimization, fabrication to measurement of the balanced filter, microstrip filter, absorptive filter, power divider, and balun. This book is suitable for the professional technicians who are engaged in the design and engineering application of microwave and millimeter-wave device chips. It can also be used as the textbook of electronic science and technology, electromagnetic field and microwave technology, electronic engineering, radar engineering, integrated circuit, and other related majors in colleges and universities.

Download or read book Analysis Methods for RF Microwave and Millimeter Wave Planar Transmission Line Structures written by Cam Nguyen and published by John Wiley & Sons. This book was released on 2003-06-11 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop reference to the major techniques for analyzing microwave planar transmission line structures The last two decades have seen important progress in the development of methods for the analysis of microwave and millimeter-wave passive structures, which contributed greatly to microwave integrated circuit design while also stimulating the development of new planar transmission lines. This timely and authoritative work introduces microwave engineers to the most commonly used techniques for analyzing microwave planar transmission line structures. Designed to be easily accessible to readers with only a fundamental background in electromagnetic theory, the book provides clear explanations of the theory and applications of Green's function, the conformal-mapping method, spectral domain methods, variational methods, and the mode-matching methods. Coverage for each method is self-contained and supplemented with problems and solutions as well as useful figures. In addition to providing detailed formulations of the methods under discussion, this highly practical book also demonstrates how to apply the principles of electromagnetic theory to the analysis of microwave boundary value problems, customize methods for specific needs, and develop new techniques. Analysis Methods for RF, Microwave, and Millimeter-Wave Planar Transmission Line Structures is an excellent working resource for anyone involved in the design and engineering of RF, microwave, and millimeter-wave integrated circuits.

Download or read book Handbook of Integrated Circuit Industry written by Yangyuan Wang and published by Springer Nature. This book was released on 2023-12-29 with total page 2006 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by hundreds experts who have made contributions to both enterprise and academics research, these excellent reference books provide all necessary knowledge of the whole industrial chain of integrated circuits, and cover topics related to the technology evolution trends, fabrication, applications, new materials, equipment, economy, investment, and industrial developments of integrated circuits. Especially, the coverage is broad in scope and deep enough for all kind of readers being interested in integrated circuit industry. Remarkable data collection, update marketing evaluation, enough working knowledge of integrated circuit fabrication, clear and accessible category of integrated circuit products, and good equipment insight explanation, etc. can make general readers build up a clear overview about the whole integrated circuit industry. This encyclopedia is designed as a reference book for scientists and engineers actively involved in integrated circuit research and development field. In addition, this book provides enough guide lines and knowledges to benefit enterprisers being interested in integrated circuit industry.

Download or read book RF Circuits for 5G Applications written by Sangeeta Singh and published by John Wiley & Sons. This book was released on 2023-03-10 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF CIRCUITS FOR 5G APPLICATIONS This book addresses FinFET-based analog IC designing for fifth generation (5G) communication networks and highlights the latest advances, problems, and challenges while presenting the latest research results in the field of mmwave integrated circuits designing. The wireless communication sector is experiencing exponential expansion, particularly in the areas of mobile data and the 5G mobile network, creating fresh market possibilities for designing the integrated circuits (ICs) needed in the industry. Drawing from scientific literature and practical realization, this book explores FinFET-based analog IC designing for 5G communication networks and considers the latest breakthroughs and obstacles. It also presents the recent research trends and future roadmaps for the 5G communication circuits. RF Circuits for 5G Applications includes design guidelines to be considered when designing these circuits and detrimental scaling effects of the same. In addition, to enhance the usability of this book, the editors have included real-time problems in RFIC designing and case studies from experimental results, as well as clearly demarcated design guidelines for the 5G communication ICs designing. Audience The primary target audience includes researchers, postgraduate students, and industry professionals pursuing specializations in RF engineering, electronics engineering, electrical engineering, information, and communication technology.

Download or read book Estimation and Optimization of Layout Parasitics for Silicon based Millimeter wave Integrated Circuits written by Padmanava Sen and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Millimeter-wave has been a medium for automotive, sensor, and defense applications for a long time. But, a fully integrated silicon-based transceiver at 60 GHz or higher frequencies has become the driving force for recent research activities in integrated millimeter-wave (MMW) circuit designs. However, no integrated compact high-performance millimeter-wave system can be designed without accurate estimation and optimization of layout parasitics. In this dissertation, the estimation, modeling and optimization of parasitic effects as well as the verification of extraction methodologies for RF/MMW applications are investigated. Different circuit design- and layout-examples are considered with stress on the inclusion and optimization of wire/interconnect parasitics. A novel methodology is proposed to reduce the number of design-passes and to include layout parasitics in the design optimization procedure. An automated verification procedure for existing parasitic extraction tools is developed. Neural-network-based models are used to demonstrate the effectiveness of artificial intelligence techniques for characterizing parasitic components. The parasitic sensitivities for selected millimeter-wave circuits are demonstrated, and a parasitic benchmarking procedure is developed using MMW oscillators. Measurement results of several circuits that are implemented in state-of-the-art CMOS and SiGe-BiCMOS processes are used to demonstrate the role of parasitics and the systematic design methodology including parasitics.

Download or read book Millimeter Wave Circuits for 5G and Radar written by Gernot Hueber and published by Cambridge University Press. This book was released on 2019-06-20 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the concepts and techniques needed to design millimeter-wave circuits for current and emerging wireless system applications.

Download or read book Analog RF and Mixed Signal Circuit Systematic Design written by Mourad Fakhfakh and published by Springer Science & Business Media. This book was released on 2013-02-03 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the fact that in the digital domain, designers can take full benefits of IPs and design automation tools to synthesize and design very complex systems, the analog designers’ task is still considered as a ‘handcraft’, cumbersome and very time consuming process. Thus, tremendous efforts are being deployed to develop new design methodologies in the analog/RF and mixed-signal domains. This book collects 16 state-of-the-art contributions devoted to the topic of systematic design of analog, RF and mixed signal circuits. Divided in the two parts Methodologies and Techniques recent theories, synthesis techniques and design methodologies, as well as new sizing approaches in the field of robust analog and mixed signal design automation are presented for researchers and R/D engineers.