Download or read book Design Manufacturing Building and Testing Subsystems of Cube Satellite written by Ahmed Ibrahim and published by GRIN Verlag. This book was released on 2021-09-23 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bachelor Thesis from the year 2014 in the subject Engineering - Aerospace Technology, grade: 4.0, Cairo University, language: English, abstract: This document describes a B.Sc. graduation project (2014). The main objective of this third iteration of the Cairo University Cube Satellite is the design, manufacturing, building and testing selected subsystems of Cube Satellite. The mission of the Cube satellite is Earth imaging and the whole process uses COTS. This document is organized the introduction and six chapters each describes one of the selected subsystems. The mission analysis and orbital determination chapter selects the best orbit matched to the mission requirements. The electrical power subsystem generates energy via the sun, distributes and manages the power among the other subsystems. The attitude determination and control is responsible for the orientation of the Cube Satellite in orbit, and controls the orientation of the Cube Satellite. The communications subsystem is responsible for the data transmission from/to the Cube satellite and the ground station. The command and data-handling center (On Board Computer) handles all the data and commands on the Cube satellite and controls the Cube satellite modes and states. Finally, the structure subsystem chapter includes design the cube satellite structure, stress and weight analysis, inertia and natural frequencies determination. All collected and auxiliary data, code snippets, specification sheets... etc. are presented in eight appendices at the end of the document. A secondary objective is enrich the documentation of the current level of the knowhow achieved by the participants of the project.

Download or read book CubeSat Handbook written by Chantal Cappelletti and published by Academic Press. This book was released on 2020-09-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: CubeSat Handbook: From Mission Design to Operations is the first book solely devoted to the design, manufacturing, and in-orbit operations of CubeSats. Beginning with an historical overview from CubeSat co-inventors Robert Twiggs and Jordi Puig-Suari, the book is divided into 6 parts with contributions from international experts in the area of small satellites and CubeSats. It covers topics such as standard interfaces, on-board & ground software, industry standards in terms of control algorithms and sub-systems, systems engineering, standards for AITV (assembly, integration, testing and validation) activities, and launch regulations. This comprehensive resource provides all the information needed for engineers and developers in industry and academia to successfully design and launch a CubeSat mission. Provides an overview on all aspects that a CubeSat developer needs to analyze during mission design and its realization Features practical examples on how to design and deal with possible issues during a CubeSat mission Covers new developments and technologies, including ThinSats and PocketQubeSats

Download or read book Achieving Science with CubeSats written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-11-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space-based observations have transformed our understanding of Earth, its environment, the solar system and the universe at large. During past decades, driven by increasingly advanced science questions, space observatories have become more sophisticated and more complex, with costs often growing to billions of dollars. Although these kinds of ever-more-sophisticated missions will continue into the future, small satellites, ranging in mass between 500 kg to 0.1 kg, are gaining momentum as an additional means to address targeted science questions in a rapid, and possibly more affordable, manner. Within the category of small satellites, CubeSats have emerged as a space-platform defined in terms of (10 cm x 10 cm x 10 cm)- sized cubic units of approximately 1.3 kg each called "U's." Historically, CubeSats were developed as training projects to expose students to the challenges of real-world engineering practices and system design. Yet, their use has rapidly spread within academia, industry, and government agencies both nationally and internationally. In particular, CubeSats have caught the attention of parts of the U.S. space science community, which sees this platform, despite its inherent constraints, as a way to affordably access space and perform unique measurements of scientific value. The first science results from such CubeSats have only recently become available; however, questions remain regarding the scientific potential and technological promise of CubeSats in the future. Achieving Science with CubeSats reviews the current state of the scientific potential and technological promise of CubeSats. This report focuses on the platform's promise to obtain high- priority science data, as defined in recent decadal surveys in astronomy and astrophysics, Earth science and applications from space, planetary science, and solar and space physics (heliophysics); the science priorities identified in the 2014 NASA Science Plan; and the potential for CubeSats to advance biology and microgravity research. It provides a list of sample science goals for CubeSats, many of which address targeted science, often in coordination with other spacecraft, or use "sacrificial," or high-risk, orbits that lead to the demise of the satellite after critical data have been collected. Other goals relate to the use of CubeSats as constellations or swarms deploying tens to hundreds of CubeSats that function as one distributed array of measurements.

Download or read book Handbook of Small Satellites written by Joseph N. Pelton and published by Springer. This book was released on 2020-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, the field of small satellites has expanded the space industry in a powerful way. Hundreds, indeed thousands, of these innovative and highly cost-efficient satellites are now being launched from Earth to establish low-cost space systems. These smallsats are engaged in experiments and prototype testing, communications services, data relay, internet access, remote sensing, defense and security related services, and more. Some of these systems are quite small and are simple student experiments, while others in commercial constellations are employing state-of-the-art technologies to deliver fast and accurate services. This handbook provides a comprehensive overview of this exciting new field. It covers the technology, applications and services, design and manufacture, launch arrangements, ground systems, and economic and regulatory arrangements surrounding small satellites. The diversity of approach in recent years has allowed for rapid innovation and economic breakthroughs to proceed at a pace that seems only to be speeding up. In this reference work, readers will find information pertaining to all aspects of the small satellite industry, written by a host of international experts in the field.

Download or read book Innovative Design Manufacturing and Testing of Small Satellites written by Scott Madry and published by Springer. This book was released on 2018-05-12 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details key trends involving the recent formation of scores of companies that build and launch small satellites or provide key components for small satellite constellations. The applications and usage are quite diverse and include student experiments, serious scientific experimentation, and totally new types of commercial constellations, particularly in telecommunications and remote sensing. The explosive growth in the design, manufacturing, and launch of small satellites is one of the most dynamic aspects in the area of space exploration and exploitation today. New commercial space companies such as Planet Labs, Sky Box, OneWeb, and LeoSat are now building and launching thousands of small satellites and cubesats into orbit. Small companies and big aerospace companies alike are getting into this exciting and interesting new business. This is a practical guide that provides advice to students, researchers, LEO satellite companies, and regulators wrestling with some of the new challenges that small satellites present as more and more companies and countries around the world enter the new small satellite arena.

Download or read book Alternative structure design for Cubesat written by Gustavo Cotta Vallina and published by GRIN Verlag. This book was released on 2014-12-08 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bachelor Thesis from the year 2014 in the subject Engineering - Aerospace Technology, grade: 10/10, Universidad Europea de Madrid, language: English, abstract: The whole Cubesat functionality depends on the integrity of its subsystems. For that reason, it is very important that the structure subsystem is built to be robust and reliable to ensure the protection of all other subsystems integrated within. The goal is to develop a high performance Cubesat structure with the use of new materials, like composite materials. The use of composite materials for primary structure increases the strength and reduces the weight of existing Cubesat structures increasing at the same time the payload capacity. Interplanetary missions require more robust and reliable structures so a Cubesat manufactured with composite materials could be the solution for those exploratory missions. One of the keys of a composite structure is the design in order to reduce manufacturing cost and stress concentration, especially on interference with other components. The results of study on alternative structures designs for Cubesat, shows that one solid wall composite Cubesat design can stand up to 25g loads with a temperature range of -55°C (-67° F) to 90°C (194° F). Additionally, the vibration simulation results show a minimum vibration mode of 157.6 Hz. All of that was achieved with a weight of 183 grams.

Download or read book Developing an Advanced Hardware Testing System to Enable Rapid Spacecraft Manufacturing written by Rami Kandela and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of small satellites in commercial constellations has attracted much attention in recent days. This necessitates the need to utilize innovative solutions to building multiple identical satellites both quickly and economically. An automated test system is developed for mass production and verification of hardware. It eases the repetitiveness in production verification tests, reduces human errors and increases reliability. The thesis addresses challenges in large-scale hardware testing with a particular focus on two primary areas: (i) specific process and challenges in building a spacecraft power subsystem; and (ii) testing hardware at a large-scale. The first part of this thesis presents the challenges affiliated with hardware production and validation tests. The second part presents the framework developed to generate and track hardware manufacturing information. The third part details the design and implementation of a system comprising of algorithms, instrumentation, and data acquisition units that interface with the device under test.

Download or read book Design for Additive Manufacturing written by Dhruv Bhate and published by SAE International. This book was released on 2018-07-20 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the coming decades, the growth in AM will likely be driven by production parts that leverage this increase in design freedom to manufacture parts of higher performance and improved material utilization. Contrary to popular opinion, however, AM processes do have their constraints and limitations - not everything can be manufactured with AM, and even when it is feasible, not everything should. Design for Additive Manufacturing: Concepts and Considerations for the Aerospace Industry, edited by Dr. Dhruv Bhate, is a collection of ten seminal SAE International technical papers, which cover AM from the perspective of the appropriateness (should) and feasibility (can) of using AM for manufacturing of parts and tooling. Although AM technologies have been around for three decades, many in the industry believe that we are merely at the beginning of the revolution in the design-driven aspects of this technology. Indeed, half the papers in this selection were published only in the past two years, and all but one in the past decade. When it comes to design for AM, it is a safe bet that the best is yet to be.

Download or read book Next Generation CubeSats and SmallSats written by Francesco Branz and published by Elsevier. This book was released on 2023-08-24 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next Generation of CubeSats and SmallSats: Enabling Technologies, Missions, and Markets provides a comprehensive understanding of the small and medium sized satellite approach and its potentialities and limitations. The book analyzes promising applications (e.g., constellations and distributed systems, small science platforms that overachieve relative to their development time and cost) as paradigm-shifting solutions for space exploitation, with an analysis of market statistics and trends and a prediction of where the technologies, and consequently, the field is heading in the next decade. The book also provides a thorough analysis of CubeSat potentialities and applications, and addresses unique technical approaches and systems strategies. Throughout key sections (introduction and background, technology details, systems, applications, and future prospects), the book provides basic design tools scaled to the small satellite problem, assesses the technological state-of-the-art, and describes the most recent advancements with a look to the near future. This new book is for aerospace engineering professionals, advanced students, and designers seeking a broad view of the CubeSat world with a brief historical background, strategies, applications, mission scenarios, new challenges and upcoming advances. Presents a comprehensive and systematic view of the technologies and space missions related to nanosats and smallsats Discusses next generation technologies, up-coming advancements and future perspectives Features the most relevant CubeSat launch initiatives from NASA, ESA, and from developing countries, along with an overview of the New Space CubeSat market

Download or read book Test Validation and Detailed Design of Mini satellite Structure written by Christopher Thomas Dunn and published by . This book was released on 1997 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Description of Project: This program, along with the FY96 program "Development of Multifunctional Structures for Mini and Micro-Satellites" has been successful in developing the technologies necessary to design a multifunctional space structure, designing such a structure, developing the necessary manufacturing technology, building a structure, and performing verification testing [1]. The analytical methods developed and used in the program have included thermal analysis of structures in earth orbits, determination of structural requirements from optical performance calculations, methods for zero Coefficient of Thermal Expansion (CTE) laminate design and consideration of manufacturing and material variations in design, strength analysis of composite laminates, determination of the fundamental natural frequencies of tubular structures with anisotropic sandwich construction walls, and optimization of composite sandwich structures considering all of the above factors. A structural requirements study was done that incorporated the thermal and optical performance analyses, along with simple analyses of likely launch and use scenarios. Requirements for structural dimensional stability, stiffness, strength, and weight were determined. These requirements were then used, along with the analytical techniques developed, to design an optimized multifunctional structure. The manufacturing technologies needed to build such a structure were then developed. A one-piece, one-step construction method for a large tubular structure with composite sandwich walls was developed through a series of manufacturing experiments. The production of flat panels, curved panels, rings and partial tubes confirmed the fixturing and assembly procedures and allowed production of full sized structures. The analysis and manufacturing procedures were verified. Testing included flatwise tension testing of bond strength, tensile and bending tests to confirm failure strength, CTE verification, and vibration testing to confirm modes and modes shapes.

Download or read book Advanced Engineering Testing written by Aidy Ali and published by BoD – Books on Demand. This book was released on 2018-10-24 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advances in the method used in testing, especially in the case of structural integrity that includes fatigue and fracture tests, vibrations test and surface engineering tests that are extremely crucial and widely used by engineers and industries. The book will provide you with information on how to apply the advanced formulation, advanced theory and advanced method of testing that are relevant to all engineering fields: mechanical, electrical, civil, materials and surface engineering. The topics are explained comprehensively, including the reliable test that one should perform in order to effectively investigate the strength and validation of the developed theory or model. I hope that the material is not too theoretical and that the reader finds the case study, formulation, testing method and the analysis helpful for tackling their own engineering and science based studies.

Download or read book Space Mission Analysis and Design written by Wiley J. Larson and published by Springer. This book was released on 2013-10-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the second edition of Space Mission Analysis and Design, two changes have been introduced in the Space Technology Library. Foremost among these is the intro duction of the Space Technology Series as a part of the Space Technology Library. Dr. Wiley Larson of the US Air Force Academy and University of Colorado, Colorado Springs, will serve as Managing Editor for the Space Technology Series. This series is a cooperative effort of the Department of Defense, National Aeronautics and Space Administration, Department of Energy, and European Space Agency, coor dinated by the US Air Force Academy. The sponsors intend to bring a number of books into the series to improve the literature base in the fundamentals of space technology, beginning with the current volume. Books which are not a part of the Space Technology Series, but which also represent a substantial contribution to the space technology literature, will still be published in the Space Technology Library. As always, we welcome suggestions and contributions from the aerospace com munity.

Download or read book 3D Printing in Space written by National Research Council (U.S.). Committee on Space-Based Additive Manufacturing and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing has the potential to positively affect human spaceflight operations by enabling the in-orbit manufacture of replacement parts and tools, which could reduce existing logistics requirements for the International Space Station and future long-duration human space missions. The benefits of in-space additive manufacturing for robotic spacecraft are far less clear, although this rapidly advancing technology can also potentially enable space-based construction of large structures and, perhaps someday, substantially in the future, entire spacecraft. Additive manufacturing can also help to reimagine a new space architecture that is not constrained by the design and manufacturing confines of gravity, current manufacturing processes, and launch-related structural stresses. The specific benefits and potential scope of additive manufacturing remain undetermined. The realities of what can be accomplished today, using this technology on the ground, demonstrate the substantial gaps between the vision for additive manufacturing in space and the limitations of the technology and the progress that has to be made to develop it for space use. 3D Printing in Space evaluates the prospects of in-space additive manufacturing. This report examines the various technologies available and currently in development, and considers the possible impacts for crewed space operations and robotic spacecraft operations. Ground-based additive manufacturing is being rapidly developed by industry, and 3D Printing in Space discusses government-industry investments in technology development. According to this report, the International Space Station provides an excellent opportunity for both civilian and military research on additive manufacturing technology. Additive manufacturing presents potential opportunities, both as a tool in a broad toolkit of options for space-based activities and as a potential paradigm-changing approach to designing hardware for in-space activities. This report makes recommendations for future research, suggests objectives for an additive manufacturing roadmap, and envisions opportunities for cooperation and joint development.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Elements of Spacecraft Design written by Charles D. Brown and published by AIAA. This book was released on 2002 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This text discusses the conceptual stages of mission design, systems engineering, and orbital mechanics, providing a basis for understanding the design process for different components and functions of a spacecraft. Coverage includes propulsion and power systems, structures, attitude control, thermal control, command and data systems, and telecommunications. Worked examples and exercises are included, in addition to appendices on acronyms and abbreviations and spacecraft design data. The book can be used for self-study or for a course in spacecraft design. Brown directed the team that produced the Magellan spacecraft, and has taught spacecraft design at the University of Colorado. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Download or read book Introduction to Satellite Communication written by Bruce R. Elbert and published by Artech House. This book was released on 2008 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you are a technical or management professional, you can turn to this highly understandable and comprehensive overview of satellite technology, applications, and management. Thoroughly updated and expanded, this third edition boasts a wealth of new material, including added coverage of systems engineering as applied to satellite communications, clear explanations of all aspects of building and using a satellite systems, and discussions on digital communications and processing in modern satellite networks. The new edition also examines critical success factors and how to avoid the pitfalls in selecting satellite and ground resources. The book covers all the fundamentals of satellites, ground control systems, and earth stations, considering the design and operation of each major segment. You gain a practical understanding of the basic construction and usage of commercial satellite networks-how parts of a satellite system function, how various components interact, which role each component plays, and which factors are the most critical to success. Moreover, the book explores the economic, legal, and management issues involved in running the business of satellite communications.

Download or read book Space Fostering Latin American Societies written by Annette Froehlich and published by Springer Nature. This book was released on 2023-06-16 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book presents a comprehensive overview of the role space is playing in enabling Latin America to fulfil its developmental aspirations. Following on from the highly acclaimed Parts 1 to 3, it explains how space and its applications can be used to support the development of the full range and diversity of Latin America societies, while being driven by Latin American goals. The Latin American space sector is currently undergoing a phase of rapid and dynamic expansion, with new actors entering the field and with space applications increasingly being used to support the continent’s social, economic, and political development. All across Latin America, attention is shifting to space as a fundamental part of the continental development agenda, and the creation of a Latin American space agency is evidence of this. Additionally, while in recent years, significant advances in economic and social development have lifted many of Latin America’s people out of poverty, there is still much that needs to be done to fulfil the basic needs of the population and to afford them the dignity they deserve. To this end, space is already being employed in diverse fields of human endeavour to serve Latin America’s goals for its future, but there is still a need for further incorporation of space systems and data. This book will appeal to researchers, professionals and students in fields such as space studies, international relations, governance, and social and rural development.