Download or read book Design Information on 5Cr Mo V Alloy Steels H 11 and 5Cr Mo V Aircraft Steel for Aircraft and Missiles written by R. J. Favor and published by . This book was released on 1960 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Considerations in Selecting Materials for Large Solid propellant Rocket motor Cases written by Charles Wesley Bert and published by . This book was released on 1962 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Welding and Brazing of Alloy 718 written by Robert Melvin Evans and published by . This book was released on 1964 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of a special interest in Alloy 718, the Defense Metals Information Center has summarized information on the welding and brazing of the alloy. Two principal resons for the interest in this alloy are its good formability and its good weldability, expecially under restraint. The greater portion of the fusion welding of Alloy 718 has been done by the gas tungsten-arc (TIG) process. A discussion of welding atmosphere, filler metals, heat treatment of welds, welding under restraint, and weld toughness is presented in the section on fusion welding. Information is also presented on resistance welding and electron-beam welding of Alloy 718. The final section of this report deals with the brazing of Alloy 718.
Download or read book Titanium alloy Forgings written by H. J. Henning and published by . This book was released on 1960 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical and Mechanical Properties of Commercial Molybdenum base Alloys written by J. A. Houck and published by . This book was released on 1960 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Considerations in Developing Refractory Metal Alloys written by R. I. Jaffee and published by . This book was released on 1963 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress made in applying advanced techniques and structural concepts to the problem of strengthening the Group VI-A metals, Cr, Mo, and W, is examined. At low temperatures, T/Tm
Download or read book Stress corrosion Cracking written by Warren E. Berry and published by . This book was released on 1961 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot cold Working of Steel to Improve Strength written by Charles W. Marschall and published by . This book was released on 1963 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Review of Bending Methods for Stainless Steel Tubing written by C. T. Olofson and published by . This book was released on 1961 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Dimensions in High strength Heat treated Steel Parts written by A. R. Elsea and published by . This book was released on 1961 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE ACHIEVEMENT AND MAINTENANCE OF DESIRED DIMENSIONS IN COMPLEX, PRECISION-BUILT STRUCTURES, SUCH AS ROCKET-MOTOR CASES, ARE CRITICAL AND TECHNICALLY INVOLVED PROBLEMS. Their proper functioning demands close dimensional tolerances. Dimensional stability is extremely difficult toACHIEVE IN STEELS AT ULTRAHIGH STRENGTH LEVELS. The problem stems from interacting metallurgical factors which manifest themselves in volumetric and shape changes. The principal sources of size change are the changes in specific volume accompanying the phase transformations which occur in hardening and tempering. Distortion occurs when a part deforms in response to stress. The problem of dimensional instability is analyzed, the factors involved are discussed, and recommendations are made regarding the control of these factors. (Author).
Download or read book The Effects of High Pressure High Temperature Hydrogen on Steel written by Ellis E. Fletcher and published by . This book was released on 1964 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report deals with the deleterious effects of hydrogen gas on steel at elevated temperatures and/or pressures. Hydrogen attack on steels is manifest as decarburization, intergranular fissuring, or blistering. These conditions result in lowered tensile strength, ductility, and impact strength. The reaction of hydrogen with iron carbide to form methane is probably the most important chemical reaction involved in the attack on steel by hydrogen. Attack of steel at elevated temperatures and pressures is limited or prevented by the following measures: (1) use of steel alloyed with strong carbide-forming elements, (2) use of liners of resistant alloy steels, and (3) substitution of resistant nonferrous alloys.
Download or read book Steels for Large Solid propellant Rocket motor Cases written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1962 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Factors Influencing Metals Applications in Space Vehicles written by J. M. Allen and published by . This book was released on 1960 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking of High strength Stainless Steels in Atmospheric Environments written by C. J. Slunder and published by . This book was released on 1961 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosive Forming of Metals written by D. E. Strohecker and published by . This book was released on 1964 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiaustenitic Precipitation hardenable Stainless Steels written by D. C. Ludwigson and published by . This book was released on 1961 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The semiaustenitic precipitation-hardenable stainless steels remain austenitic on cooling rom a solution heat treatment at about 1950 F. In this form they are readily fabricable. Subsequent treatment at about 1400 or at about 1725 F depletes the austenite of Cr and C to the extent that martensite forms on cooling to room temperature or -100 F, respectively. Final hardening is effected by tempering, or aging, at 750 to 1100 F. The semiaustenitic precipitation-hardenable stainless steels may be obtained as transformed at the mill by cold rolling. In this condition they lack the good formability of solution-heat-treated material. However, the fabricator need only temper them to obtain very high strengths. These steels have a combination of good formability, high strength, and excellent corrosion resistance that is not easily matched by other materials.
Download or read book Environmental and Metallurgical Factors of Stress corrosion Cracking in High strength Steels written by C. J. Slunder and published by . This book was released on 1961 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: