Download or read book Design Guide for Rectangular Hollow Section RHS Joints Under Predominantly Static Loading written by and published by . This book was released on 2009 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Guide for Rectangular Hollow Section RHS Joints Under Predominantly Static Loading written by Jeffrey A. Packer and published by . This book was released on 1992 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide deals with the static strength criteria for various uniplanar and multiplanar welded and bolted connections of square and rectangular hollow sections with emphasis on the connection behaviour and governing connection parameters.

Download or read book Tubular Structures XII written by Z.Y. Shen and published by CRC Press. This book was released on 2008-09-11 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presentation of the latest scientific and engineering developments in the field of tubular steel structures. Covers key and emerging subjects of hollow structural sections, such as: static and fatigue behaviour of connections/joints, concrete filled hollow sections and composite tubular members, offshore structures, earthquake resistance,

Download or read book Design of Joints in Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Download or read book Design of Joints in Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 Design of steel structures: Part 1-8 Design of joints Joints in composite construction are also addressed through references to Eurocode 4 Design of composite steel and concrete structures Part 1-1: General rules and rules for buildings. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Download or read book Fatigue Design Procedure for Welded Hollow Section Joints written by X-L Zhao and published by Elsevier. This book was released on 2000-05-08 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This International Institute of Welding (IIW) report was presented at the 52nd Annual Assembly in Lisbon in June 1999. It contains recommendations representing a consensus on international best practice, focusing on a 'hot spot stress' approach.A wide range of joint types is covered, the new fatigue design curve for both RHS and CHS is dealt with and detailed values for stress concentration factors are provided.The purpose of this current IIW document is to serve both as an International Standards Organisation (ISO) draft specification and as a model standard for national and regional specifications worldwide.The Recommendations (Part one) and Commentary (Part two) were edited by Dr X-L Zhao of Monash University, Australia and Professor J A Packer of the University of Toronto, Canada.

Download or read book Tubular Structures XI written by JeffreyA. Packer and published by Routledge. This book was released on 2017-10-02 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.

Download or read book Tubular Structures X written by Angel Alonso and published by Routledge. This book was released on 2017-10-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Kurobane lecture and proceedings of the Tenth International Symposium on Tubular Structures - ISTS10, held in Madrid, Spain, 18-20 September 2003. The ISTS10 provides a platform for the presentation and discussion of seventy-three lectures covering themes including: bridges; roofs; design aspects and case studies; static joint behaviour; fatigue; members; beam-column connections; finite element methods; concrete filled tubes; trusses and frames; cast nodes; and behaviour of tubular structures under fire. This book provides a useful reference work for architects, civil and mechanical engineers, designers, manufacturers and contractors involved with tubular structures.

Download or read book Mechanics and Design of Tubular Structures written by Karoly Jarmai and published by Springer. This book was released on 2014-05-04 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps designers and manufacturers to select and develop the most suitable and competitive steel structures, which are safe, fit for production and economic. An optimum design system is used to find the best characteristics of structural models, which guarantee the fulfilment of design and fabrication requirements and minimize the cost function. Realistic numerical models are used as main components of industrial steel structures. Chapter 1 containts some experiences with the optimum design of steel structures Chapter 2 treats some newer mathematical optimization methods. Chapter 3 gives formulae for fabrication times and costs. Chapters 4 deals with beams and columns. Summarizes the Eurocode rules for design. Chapter 5 deals with the design of tubular trusses. Chapter 6 gives the design of frame structures and fire-resistant design rules for a frame. In Chapters 7 some minimum cost design problems of stiffened and cellular plates and shells are worked out for cases of different stiffenings and loads. Chapter 8 gives a cost comparison of cylindrical and conical shells. The book contains a large collection of literatures and a subject list and a name index.

Download or read book Architectural Design in Steel written by Mark Lawson and published by Taylor & Francis. This book was released on 2004-08-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steelwork offers the opportunity for architectural expression, as well as being structurally versatile and adaptable material. Good detailing is vital because it affects structural performance, costs, buildability and, perhaps most importantly, appearance. Whilst the choice of the structural form is often the province of the structural engineer, architects should have a broad appreciation of the factors leading to the selection of the structure and its details. Traditionally, most detailing of connections is the responsibility of the steelwork fabricator, but for exposed steelwork, detailing is of much more interest to the architect, as it impacts on the aesthetics of the structure. In this respect it is important that designers appreciate the common fabrication and erection techniques which may exert a strong influence on the method and approach to the detailing of modern steelwork in buildings. Architectural Design in Steel is a design guide to the detailing of exposed steelwork in buildings. It is a guide which offers technical guidance and general principles, as well as examples of best practice. It covers all aspects from manufacture to detailing, specification of finishes and fabrication, providing architects, as well as engineers, with essential information to inform the design.

Download or read book Connections in Steel Structures III written by Reidar Bjorhovde and published by Elsevier. This book was released on 1996-05-20 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book publishes the proceedings from the Third International Workshop on Connections in Steel Structures: Behaviour, Strength and Design held in Trento, Italy, 29-31 May 1995. The workshop brought together the world's foremost experts in steel connections research, development, fabrication and design. The scope of the papers reflects state-of-the-art issues in all areas of endeavour, and manages to bring together the needs of researchers as well as designers and fabricators. Topics of particular importance include connections for composite (steel-concrete) structures, evaluation methods and reliability issues for semi-rigid connections and frames, and the impact of extreme loading events such as those imposed by major earthquakes. The book highlights novel methods and applications in the field and ensures that designers and other members of the construction industry gain access to the new results and procedures.

Download or read book Tubular Structures V written by M.G. Coutie and published by CRC Press. This book was released on 2004-01-14 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book forms the Proceedings of the 5th International Symposium on Tubular Structures, following previous events in Boston (1984), Tokyo (1986), Finland (1989), Delft (1991). Sponsored by British Steel, International Institute of Welding and CIDECT, it forms an important forum for advanced structural research and development.

Download or read book Tubular Structures XVI written by Amin Heidarpour and published by CRC Press. This book was released on 2017-11-13 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XVI contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 16th International Symposium on Tubular Structures (ISTS16, Melbourne, Australia, 4-6 December 2017). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for presentation and discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: special applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members and offshore structures, earthquake and dynamic resistance, specification and standard developments, material properties and section forming, stainless and high-strength steel structures, fire, impact and blast response. Research and development issues presented in this topical book are applicable to buildings, bridges, offshore structures, cranes, trusses and towers. Tubular Structures XVI is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students all around the world.

Download or read book Tubular Structures VII written by J. Farkas and published by Routledge. This book was released on 2022-05-04 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 60 papers dealing with research results in the field of tubular structures. The following areas are covered: applications; static and fatigue behaviour of hollow section joints; beam-to-column connections; concrete-filled steel tubes; and optimum design.

Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-05 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in an e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in this printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.

Download or read book Tubular Structures XV written by Eduardo de Miranda Batista and published by CRC Press. This book was released on 2015-04-23 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XV contains the latest scientific and engineering developments in the field of tubular structures, as presented at the 15th International Symposium on Tubular Structures (ISTS15, Rio de Janeiro, Brazil, 27-29 May 2015). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal

Download or read book Tubular Structures XIV written by Leroy Gardner and published by CRC Press. This book was released on 2012-08-24 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XIV contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 14th International Symposium on Tubular Structures (ISTS14, Imperial College London, UK, 12-14 September 2012). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for b