Download or read book Design for Testability Debug and Reliability written by Sebastian Huhn and published by Springer Nature. This book was released on 2021-04-19 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several novel approaches to pave the way for the next generation of integrated circuits, which can be successfully and reliably integrated, even in safety-critical applications. The authors describe new measures to address the rising challenges in the field of design for testability, debug, and reliability, as strictly required for state-of-the-art circuit designs. In particular, this book combines formal techniques, such as the Satisfiability (SAT) problem and the Bounded Model Checking (BMC), to address the arising challenges concerning the increase in test data volume, as well as test application time and the required reliability. All methods are discussed in detail and evaluated extensively, while considering industry-relevant benchmark candidates. All measures have been integrated into a common framework, which implements standardized software/hardware interfaces.
Download or read book Design for Testability Debug and Reliability written by Sebastian Huhn and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several novel approaches to pave the way for the next generation of integrated circuits, which can be successfully and reliably integrated, even in safety-critical applications. The authors describe new measures to address the rising challenges in the field of design for testability, debug, and reliability, as strictly required for state-of-the-art circuit designs. In particular, this book combines formal techniques, such as the Satisfiability (SAT) problem and the Bounded Model Checking (BMC), to address the arising challenges concerning the increase in test data volume, as well as test application time and the required reliability. All methods are discussed in detail and evaluated extensively, while considering industry-relevant benchmark candidates. All measures have been integrated into a common framework, which implements standardized software/hardware interfaces. Provides readers with a combination of a comprehensive set of formal techniques covering and enhancing different aspects of the state-of-the-art design and test flow for ICs; Introduces newly developed heuristic, formal optimization-based and partition-based retargeting techniques and integrates them into a common framework; Describes fully compliant (with respect to industrial de-facto standard) measures to enhance the DFT, DFD and DFR capabilities while supporting standardized data exchange formats; Includes new measures to tackle shortcomings of existing state-of-the-art methods, including zero-defect enforcing safety-critical applications.
Download or read book Next Generation Design for Testability Debug and Reliability Using Formal Techniques written by Sebastian Michael Huhn and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Design and Testing for Automotive Engineering Volume II written by Young J. Chiang and published by SAE International. This book was released on 2024-09-17 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure modes and effects analysis (FMEA); Reliability; Product Development; Design Process; Test Procedures "Explore Product Design and Testing for Automotive Engineering: Volume II, an essential guide reshaping vehicle manufacturing with unprecedented reliability. As part of SAE International’s DOE for Product Reliability Growth series, this practical resource introduces cutting-edge methodologies crucial for predicting and improving product reliability in an era of automotive electrification. The book navigates statistical tolerance design, showcasing how variability in part fabrication and assembly can enhance reliability and sustainability. Key topics include: - Statistical tolerance design's impact on manufacturing and material selection, focusing on non-normal distributions' effects on product assembly and cost. Methods like maximum likelihood estimators and Monte Carlo simulations are used for assembly strategy synthesis. - Reliability DOEs using log-location-scale distributions to estimate lifetimes of non-normally distributed components, especially in accelerated life testing. It covers transformations optimizing parts and system designs under the lognormal distribution. - Weibull distribution (DOE-W) for characterizing lifetimes affected by various failure modes, detailing parameter assessment methods and real-world applications. The book also introduces reliability design of experiments based on the exponential distribution (DOE-E). - Importance of predicting lifecycles and enhancing reliability through qualitative and stepwise accelerated life tests. Integration of physics of failure with statistical methods like Weibull statistics and lognormal approximation enhances analysis credibility. - Inferential mechanisms such as the Arrhenius and Eyring models in predicting automotive component lifecycles, refining product life prediction based on reliability DOEs. Whether you're an engineer, researcher, or automotive professional, this book equips you to navigate reliability engineering confidently. Revolutionize your approach to product design and testing with Product Design and Testing for Automotive Engineering, your definitive companion in shaping the future of automotive reliability." (ISBN 9781468607703 ISBN 9781468607697 ISBN 9781468607727 DOI 10.4271/9781468607697)
Download or read book Fundamentals of Design of Experiments for Automotive Engineering Volume I written by Young J. Chiang and published by SAE International. This book was released on 2023-11-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world where innovation and sustainability are paramount, Fundamentals of Design of Experiments for Automotive Engineering: Volume I serves as a definitive guide to harnessing the power of statistical thinking in product development. As first of four volumes in SAE International’s DOE for Product Reliability Growth series, this book presents a practical, application-focused approach by emphasizing DOE as a dynamic tool for automotive engineers. It showcases real-world examples, demonstrating how process improvements and system optimizations can significantly enhance product reliability. The author, Yung Chiang, leverages extensive product development expertise to present a comprehensive process that ensures product performance and reliability throughout its entire lifecycle. Whether individuals are involved in research, design, testing, manufacturing, or marketing, this essential reference equips them with the skills needed to excel in their respective roles. This book explores the potential of Reliability and Sustainability with DOE, featuring the following topics: - Fundamental prerequisites for deploying DOE: Product reliability processes, measurement uncertainty, failure analysis, and design for reliability. - Full factorial design 2K: A system identification tool for relating objectives to factors and understanding main and interactive effects. - Fractional factorial design 2RK-P: Ideal for identifying main effects and 2-factor interactions. - General fractional factorial design LK-P: Systematically identification of significant inputs and analysis of nonlinear behaviors. - Composite designs as response surface methods: Resolving interactions and optimizing decisions with limited factors. - Adapting to practical challenges with “short” DOE: Leveraging optimization schemes like D-optimality, and A-optimality for optimal results. Readers are encouraged not to allow product failures to hinder progress but to embrace the "statistical thinking" embedded in DOE. This book can illuminate the path to designing products that stand the test of time, resulting in satisfied customers and thriving businesses. (ISBN 9781468606027, ISBN 9781468606034, ISBN 9781468606041, DOI 10.4271/9781468606034)
Download or read book Practical Reliability Of Electronic Equipment And Products written by Eugene R. Hnatek and published by CRC Press. This book was released on 2002-10-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining numerous examples of highly sensitive products, this book reviews basic reliability mathematics, describes robust design practices, and discusses the process of selecting suppliers and components. He focuses on the specific issues of thermal management, electrostatic discharge, electromagnetic compatibility, printed wiring assembly, environmental stress testing, and failure analysis. The book presents methods for meeting the reliability goals established for the manufacture of electronic product hardware and addresses the development of reliable software. The appendix provides example guidelines for the derating of electrical and electromechanical components.
Download or read book Electronic Design Automation written by Laung-Terng Wang and published by Morgan Kaufmann. This book was released on 2009-03-11 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides broad and comprehensive coverage of the entire EDA flow. EDA/VLSI practitioners and researchers in need of fluency in an "adjacent" field will find this an invaluable reference to the basic EDA concepts, principles, data structures, algorithms, and architectures for the design, verification, and test of VLSI circuits. Anyone who needs to learn the concepts, principles, data structures, algorithms, and architectures of the EDA flow will benefit from this book. - Covers complete spectrum of the EDA flow, from ESL design modeling to logic/test synthesis, verification, physical design, and test - helps EDA newcomers to get "up-and-running" quickly - Includes comprehensive coverage of EDA concepts, principles, data structures, algorithms, and architectures - helps all readers improve their VLSI design competence - Contains latest advancements not yet available in other books, including Test compression, ESL design modeling, large-scale floorplanning, placement, routing, synthesis of clock and power/ground networks - helps readers to design/develop testable chips or products - Includes industry best-practices wherever appropriate in most chapters - helps readers avoid costly mistakes
Download or read book Software Engineering written by Nasib Singh Gill and published by KHANNA PUBLISHING HOUSE. This book was released on with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each and every chapter covers the contents up to a reasonable depth necessary for the intended readers in the field. The book consists in all about 1200 exercises based on the topics and sub-topics covered. Keeping in view the emerging trends in newly emerging scenario with new dimension of software engineering, the book specially includes the following chapters, but not limited to these only. This book explains all the notions related to software engineering in a very systematic way, which is of utmost importance to the novice readers in the field of software Engineering.
Download or read book System on Chip Test Architectures written by Laung-Terng Wang and published by Morgan Kaufmann. This book was released on 2010-07-28 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics testing has a legacy of more than 40 years. The introduction of new technologies, especially nanometer technologies with 90nm or smaller geometry, has allowed the semiconductor industry to keep pace with the increased performance-capacity demands from consumers. As a result, semiconductor test costs have been growing steadily and typically amount to 40% of today's overall product cost. This book is a comprehensive guide to new VLSI Testing and Design-for-Testability techniques that will allow students, researchers, DFT practitioners, and VLSI designers to master quickly System-on-Chip Test architectures, for test debug and diagnosis of digital, memory, and analog/mixed-signal designs. - Emphasizes VLSI Test principles and Design for Testability architectures, with numerous illustrations/examples. - Most up-to-date coverage available, including Fault Tolerance, Low-Power Testing, Defect and Error Tolerance, Network-on-Chip (NOC) Testing, Software-Based Self-Testing, FPGA Testing, MEMS Testing, and System-In-Package (SIP) Testing, which are not yet available in any testing book. - Covers the entire spectrum of VLSI testing and DFT architectures, from digital and analog, to memory circuits, and fault diagnosis and self-repair from digital to memory circuits. - Discusses future nanotechnology test trends and challenges facing the nanometer design era; promising nanotechnology test techniques, including Quantum-Dots, Cellular Automata, Carbon-Nanotubes, and Hybrid Semiconductor/Nanowire/Molecular Computing. - Practical problems at the end of each chapter for students.
Download or read book VLSI Test Principles and Architectures written by Laung-Terng Wang and published by Elsevier. This book was released on 2006-08-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume. - Most up-to-date coverage of design for testability. - Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. - Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.
Download or read book Design for Reliability written by Dev G. Raheja and published by John Wiley & Sons. This book was released on 2012-07-20 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, design-based approach to reliability engineering Design for Reliability provides engineers and managers with a range of tools and techniques for incorporating reliability into the design process for complex systems. It clearly explains how to design for zero failure of critical system functions, leading to enormous savings in product life-cycle costs and a dramatic improvement in the ability to compete in global markets. Readers will find a wealth of design practices not covered in typical engineering books, allowing them to think outside the box when developing reliability requirements. They will learn to address high failure rates associated with systems that are not properly designed for reliability, avoiding expensive and time-consuming engineering changes, such as excessive testing, repairs, maintenance, inspection, and logistics. Special features of this book include: A unified approach that integrates ideas from computer science and reliability engineering Techniques applicable to reliability as well as safety, maintainability, system integration, and logistic engineering Chapters on design for extreme environments, developing reliable software, design for trustworthiness, and HALT influence on design Design for Reliability is a must-have guide for engineers and managers in R&D, product development, reliability engineering, product safety, and quality assurance, as well as anyone who needs to deliver high product performance at a lower cost while minimizing system failure.
Download or read book Digital Systems Design with FPGAs and CPLDs written by Ian Grout and published by Elsevier. This book was released on 2011-04-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Systems Design with FPGAs and CPLDs explains how to design and develop digital electronic systems using programmable logic devices (PLDs). Totally practical in nature, the book features numerous (quantify when known) case study designs using a variety of Field Programmable Gate Array (FPGA) and Complex Programmable Logic Devices (CPLD), for a range of applications from control and instrumentation to semiconductor automatic test equipment.Key features include:* Case studies that provide a walk through of the design process, highlighting the trade-offs involved.* Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.With this book engineers will be able to:* Use PLD technology to develop digital and mixed signal electronic systems* Develop PLD based designs using both schematic capture and VHDL synthesis techniques* Interface a PLD to digital and mixed-signal systems* Undertake complete design exercises from design concept through to the build and test of PLD based electronic hardwareThis book will be ideal for electronic and computer engineering students taking a practical or Lab based course on digital systems development using PLDs and for engineers in industry looking for concrete advice on developing a digital system using a FPGA or CPLD as its core. - Case studies that provide a walk through of the design process, highlighting the trade-offs involved. - Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.
Download or read book Hardware Security written by Swarup Bhunia and published by Morgan Kaufmann. This book was released on 2018-10-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardware Security: A Hands-On Learning Approach provides a broad, comprehensive and practical overview of hardware security that encompasses all levels of the electronic hardware infrastructure. It covers basic concepts like advanced attack techniques and countermeasures that are illustrated through theory, case studies and well-designed, hands-on laboratory exercises for each key concept. The book is ideal as a textbook for upper-level undergraduate students studying computer engineering, computer science, electrical engineering, and biomedical engineering, but is also a handy reference for graduate students, researchers and industry professionals. For academic courses, the book contains a robust suite of teaching ancillaries. Users will be able to access schematic, layout and design files for a printed circuit board for hardware hacking (i.e. the HaHa board) that can be used by instructors to fabricate boards, a suite of videos that demonstrate different hardware vulnerabilities, hardware attacks and countermeasures, and a detailed description and user manual for companion materials. - Provides a thorough overview of computer hardware, including the fundamentals of computer systems and the implications of security risks - Includes discussion of the liability, safety and privacy implications of hardware and software security and interaction - Gives insights on a wide range of security, trust issues and emerging attacks and protection mechanisms in the electronic hardware lifecycle, from design, fabrication, test, and distribution, straight through to supply chain and deployment in the field - A full range of instructor and student support materials can be found on the authors' own website for the book: http://hwsecuritybook.org
Download or read book VLSI Design and Test for Systems Dependability written by Shojiro Asai and published by Springer. This book was released on 2018-07-20 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the new roles that the VLSI (very-large-scale integration of semiconductor circuits) is taking for the safe, secure, and dependable design and operation of electronic systems. The book consists of three parts. Part I, as a general introduction to this vital topic, describes how electronic systems are designed and tested with particular emphasis on dependability engineering, where the simultaneous assessment of the detrimental outcome of failures and cost of their containment is made. This section also describes the related research project “Dependable VLSI Systems,” in which the editor and authors of the book were involved for 8 years. Part II addresses various threats to the dependability of VLSIs as key systems components, including time-dependent degradations, variations in device characteristics, ionizing radiation, electromagnetic interference, design errors, and tampering, with discussion of technologies to counter those threats. Part III elaborates on the design and test technologies for dependability in such applications as control of robots and vehicles, data processing, and storage in a cloud environment and heterogeneous wireless telecommunications. This book is intended to be used as a reference for engineers who work on the design and testing of VLSI systems with particular attention to dependability. It can be used as a textbook in graduate courses as well. Readers interested in dependable systems from social and industrial–economic perspectives will also benefit from the discussions in this book.
Download or read book Debugging Embedded and Real Time Systems written by Arnold S. Berger and published by Newnes. This book was released on 2020-07-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debugging Embedded and Real-Time Systems: The Art, Science, Technology and Tools of Real-Time System Debugging gives a unique introduction to debugging skills and strategies for embedded and real-time systems. Practically focused, it draws on application notes and white papers written by the companies who create design and debug tools. Debugging Embedded and Real Time Systems presents best practice strategies for debugging real-time systems, through real-life case studies and coverage of specialized tools such as logic analysis, JTAG debuggers and performance analyzers. It follows the traditional design life cycle of an embedded system and points out where defects can be introduced and how to find them and prevent them in future designs. It also studies application performance monitoring, the execution trace recording of individual applications, and other tactics to debug and control individual running applications in the multitasking OS. Suitable for the professional engineer and student, this book is a compendium of best practices based on the literature as well as the author's considerable experience as a tools' developer. - Provides a unique reference on Debugging Embedded and Real-Time Systems - Presents best practice strategies for debugging real-time systems - Written by an author with many years of experience as a tools developer - Includes real-life case studies that show how debugging skills can be improved - Covers logic analysis, JTAG debuggers and performance analyzers that are used for designing and debugging embedded systems
Download or read book Reliability Engineering written by A. Birolini and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability engineering is a rapidly evolving discipline, whose purpose is to develop methods and tools to predict, evaluate, and demonstrate reliability, maintainability, and availability of components, equipment, and systems, as well as to support development and production engineers in building in reliability and maintainability. To be cost and time effective, reliability engineering has to be coordinated with quality assurance activities, in agreement with Total Quality Management (TQM) and Concurrent Engineering efforts. To build in reliability and maintainability into complex equipment or systems, failure rate and failure mode analyses have to be performed early in the development phase and be supported by design guidelines for reliability, maintainability, and software quality as well as by extensive design reviews. Before production, qualification tests on prototypes are necessary to ensure that quality and reliability targets have been met. In the production phase, processes need to be selected and monitored to assure the required quality level. For many systems, availability requirements have also to be satisfied. In these cases, stochastic processes can be used to investigate and optimize availability. including logistical support as well. Software often plays a dominant role, requiring specific quality assurance activities. This book presents the state-of-the-art of reliability engineering, both in theory and practice. It is based on over 25 years experience of the author in this field, half of which was in industry and half as Professor for reliability engineering at the ETH (Swiss Federal Institute of Technology Zurich).
Download or read book Clocking in Modern VLSI Systems written by Thucydides Xanthopoulos and published by Springer Science & Business Media. This book was released on 2009-08-19 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: . . . ????????????????????????????????? ????????????? ????????????,????? ???? ??????????? ???????????????????? ???. THUCYDIDIS HISTORIAE IV:108 C. Hude ed. , Teubner, Lipsiae MCMXIII ???????????,????? ??,? ????????????????? ???????????????????? ?????? ?????? ?????? ??? ????????? ??? ?’ ?????????? ??’ ?????????? ? ??????? ??? ????????????? ???????. ???????????????????:108 ???????????? ?????????????????????? ?. ?????????????. ????????????,????? It being the fashion of men, what they wish to be true to admit even upon an ungrounded hope, and what they wish not, with a magistral kind of arguing to reject. Thucydides (the Peloponnesian War Part I), IV:108 Thomas Hobbes Trans. , Sir W. Molesworth ed. In The English Works of Thomas Hobbes of Malmesbury, Vol. VIII I have been introduced to clock design very early in my professional career when I was tapped right out of school to design and implement the clock generation and distribution of the Alpha 21364 microprocessor. Traditionally, Alpha processors - hibited highly innovative clocking systems, always worthy of ISSCC/JSSC publi- tions and for a while Alpha processors were leading the industry in terms of clock performance. I had huge shoes to ?ll. Obviously, I was overwhelmed, confused and highly con?dent that I would drag the entire project down.
