Download or read book Design for Manufacturability with Advanced Lithography written by Bei Yu and published by Springer. This book was released on 2015-10-28 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the most advanced research results on Design for Manufacturability (DFM) with multiple patterning lithography (MPL) and electron beam lithography (EBL). The authors describe in detail a set of algorithms/methodologies to resolve issues in modern design for manufacturability problems with advanced lithography. Unlike books that discuss DFM from the product level or physical manufacturing level, this book describes DFM solutions from a circuit design level, such that most of the critical problems can be formulated and solved through combinatorial algorithms.
Download or read book Design for Manufacturability and Yield for Nano Scale CMOS written by Charles Chiang and published by Springer Science & Business Media. This book was released on 2007-06-15 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through all the aspects of manufacturability and yield in a nano-CMOS process. It covers all CAD/CAE aspects of a SOC design flow and addresses a new topic (DFM/DFY) critical at 90 nm and beyond. This book is a must read book the serious practicing IC designer and an excellent primer for any graduate student intent on having a career in IC design or in EDA tool development.
Download or read book Design for Manufacturability written by Artur Balasinski and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable guide for layout designers, packaging engineers and quality engineers, covering DfM development from 1D to 4D, involving IC design flow setup, best practices, links to manufacturing and product definition, for process technologies down to 22 nm node, and product families including memories, logic, system-on-chip and system-in-package.
Download or read book Physical Design and Mask Synthesis for Directed Self Assembly Lithography written by Seongbo Shim and published by Springer. This book was released on 2018-03-21 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses physical design and mask synthesis of directed self-assembly lithography (DSAL). It covers the basic background of DSAL technology, physical design optimizations such as placement and redundant via insertion, and DSAL mask synthesis as well as its verification. Directed self-assembly lithography (DSAL) is a highly promising patterning solution in sub-7nm technology.
Download or read book Design for Manufacturability and Statistical Design written by Michael Orshansky and published by Springer Science & Business Media. This book was released on 2007-10-28 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturability and Statistical Design: A Comprehensive Approach presents a comprehensive overview of methods that need to be mastered in understanding state-of-the-art design for manufacturability and statistical design methodologies. Broadly, design for manufacturability is a set of techniques that attempt to fix the systematic sources of variability, such as those due to photolithography and CMP. Statistical design, on the other hand, deals with the random sources of variability. Both paradigms operate within a common framework, and their joint comprehensive treatment is one of the objectives of this book and an important differentation.
Download or read book Directed Self assembly of Block Co polymers for Nano manufacturing written by Roel Gronheid and published by Woodhead Publishing. This book was released on 2015-07-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The directed self-assembly (DSA) method of patterning for microelectronics uses polymer phase-separation to generate features of less than 20nm, with the positions of self-assembling materials externally guided into the desired pattern. Directed self-assembly of Block Co-polymers for Nano-manufacturing reviews the design, production, applications and future developments needed to facilitate the widescale adoption of this promising technology. Beginning with a solid overview of the physics and chemistry of block copolymer (BCP) materials, Part 1 covers the synthesis of new materials and new processing methods for DSA. Part 2 then goes on to outline the key modelling and characterization principles of DSA, reviewing templates and patterning using topographical and chemically modified surfaces, line edge roughness and dimensional control, x-ray scattering for characterization, and nanoscale driven assembly. Finally, Part 3 discusses application areas and related issues for DSA in nano-manufacturing, including for basic logic circuit design, the inverse DSA problem, design decomposition and the modelling and analysis of large scale, template self-assembly manufacturing techniques. Authoritative outlining of theoretical principles and modeling techniques to give a thorough introdution to the topic Discusses a broad range of practical applications for directed self-assembly in nano-manufacturing Highlights the importance of this technology to both the present and future of nano-manufacturing by exploring its potential use in a range of fields
Download or read book Nano CMOS Design for Manufacturability written by Ban P. Wong and published by John Wiley & Sons. This book was released on 2008-12-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover innovative tools that pave the way from circuit and physical design to fabrication processing Nano-CMOS Design for Manufacturability examines the challenges that design engineers face in the nano-scaled era, such as exacerbated effects and the proven design for manufacturability (DFM) methodology in the midst of increasing variability and design process interactions. In addition to discussing the difficulties brought on by the continued dimensional scaling in conformance with Moore's law, the authors also tackle complex issues in the design process to overcome the difficulties, including the use of a functional first silicon to support a predictable product ramp. Moreover, they introduce several emerging concepts, including stress proximity effects, contour-based extraction, and design process interactions. This book is the sequel to Nano-CMOS Circuit and Physical Design, taking design to technology nodes beyond 65nm geometries. It is divided into three parts: Part One, Newly Exacerbated Effects, introduces the newly exacerbated effects that require designers' attention, beginning with a discussion of the lithography aspects of DFM, followed by the impact of layout on transistor performance Part Two, Design Solutions, examines how to mitigate the impact of process effects, discussing the methodology needed to make sub-wavelength patterning technology work in manufacturing, as well as design solutions to deal with signal, power integrity, WELL, stress proximity effects, and process variability Part Three, The Road to DFM, describes new tools needed to support DFM efforts, including an auto-correction tool capable of fixing the layout of cells with multiple optimization goals, followed by a look ahead into the future of DFM Throughout the book, real-world examples simplify complex concepts, helping readers see how they can successfully handle projects on Nano-CMOS nodes. It provides a bridge that allows engineers to go from physical and circuit design to fabrication processing and, in short, make designs that are not only functional, but that also meet power and performance goals within the design schedule.
Download or read book Extending Moore s Law through Advanced Semiconductor Design and Processing Techniques written by Wynand Lambrechts and published by CRC Press. This book was released on 2018-09-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a methodological understanding of the theoretical and technical limitations to the longevity of Moore’s law. The book presents research on factors that have significant impact on the future of Moore’s law and those factors believed to sustain the trend of the last five decades. Research findings show that boundaries of Moore’s law primarily include physical restrictions of scaling electronic components to levels beyond that of ordinary manufacturing principles and approaching the bounds of physics. The research presented in this book provides essential background and knowledge to grasp the following principles: Traditional and modern photolithography, the primary limiting factor of Moore’s law Innovations in semiconductor manufacturing that makes current generation CMOS processing possible Multi-disciplinary technologies that could drive Moore's law forward significantly Design principles for microelectronic circuits and components that take advantage of technology miniaturization The semiconductor industry economic market trends and technical driving factors The complexity and cost associated with technology scaling have compelled researchers in the disciplines of engineering and physics to optimize previous generation nodes to improve system-on-chip performance. This is especially relevant to participate in the increased attractiveness of the Internet of Things (IoT). This book additionally provides scholarly and practical examples of principles in microelectronic circuit design and layout to mitigate technology limits of previous generation nodes. Readers are encouraged to intellectually apply the knowledge derived from this book to further research and innovation in prolonging Moore’s law and associated principles.
Download or read book Design for Manufacturing and Assembly written by O. Molloy and published by Springer Science & Business Media. This book was released on 1998-03-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to compete in the current commercial environment companies must produce greater product variety, at lower cost, all within a reduced product life cycle. To achieve this, a concurrent engineering philosophy is often adopted. In many cases the main realization of this is Design for Manufacture and Assembly (DFM/A). There is a need for in-depth study of the architectures for DFM/A systems in order that the latest software and knowledge-based techniques may be used to deliver the DFM/A systems of tomorrow. This architecture must be based upon complete understanding of the issues involved in integrating the design and manufacturing domains. This book provides a comprehensive view of the capabilities of advanced DFM/A systems based on a common architecture.
Download or read book Handbook of Emerging Materials for Semiconductor Industry written by Young Suh Song and published by Springer Nature. This book was released on with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Nanomaterials and Their Applications in Renewable Energy written by Tian-Hao Yan and published by Elsevier. This book was released on 2022-07-30 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials and Their Applications in Renewable Energy, Second Edition presents timely topics related to nanomaterials' feasible synthesis and characterization and their application in the energy fields. The book examines the broader aspects of energy use, including environmental effects of disposal of Li-ion and Na batteries and reviews the main energy sources of today and tomorrow, from fossil fuels to biomass, hydropower, storage power and solar energy. The monograph treats energy carriers globally in terms of energy storage, transmission, and distribution, addresses fuel cell-based solutions in transportation, industrial, and residential building, considers synergistic systems, and more. This new edition also offers updated statistical data and references; a new chapter on the synchronous x-ray based analysis techniques and electron tomography, and if waste disposal of energy materials pose a risk to the microorganism in water, and land use; expanding coverage of renewable energy from the first edition; with newer color illustrations. Provides a comprehensive review of solar energy, fuel cells and gas storage from 2010 to the present Reviews feasible synthesis and modern analytical techniques used in alternative energy Explores examples of research in alternative energy, including current assessments of nanomaterials and safety Contains a glossary of terms, units and historical benchmarks Presents a useful guide that will bring readers up-to-speed on historical developments in alternative fuel cells
Download or read book Microlithography written by Bruce W. Smith and published by CRC Press. This book was released on 2020-05-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Third Edition to the bestselling Microlithography: Science and Technology provides a balanced treatment of theoretical and operational considerations, from fundamental principles to advanced topics of nanoscale lithography. The book is divided into chapters covering all important aspects related to the imaging, materials, and processes that have been necessary to drive semiconductor lithography toward nanometer-scale generations. Renowned experts from the world’s leading academic and industrial organizations have provided in-depth coverage of the technologies involved in optical, deep-ultraviolet (DUV), immersion, multiple patterning, extreme ultraviolet (EUV), maskless, nanoimprint, and directed self-assembly lithography, together with comprehensive descriptions of the advanced materials and processes involved. New in the Third Edition In addition to the full revision of existing chapters, this new Third Edition features coverage of the technologies that have emerged over the past several years, including multiple patterning lithography, design for manufacturing, design process technology co-optimization, maskless lithography, and directed self-assembly. New advances in lithography modeling are covered as well as fully updated information detailing the new technologies, systems, materials, and processes for optical UV, DUV, immersion, and EUV lithography. The Third Edition of Microlithography: Science and Technology authoritatively covers the science and engineering involved in the latest generations of microlithography and looks ahead to the future systems and technologies that will bring the next generations to fruition. Loaded with illustrations, equations, tables, and time-saving references to the most current technology, this book is the most comprehensive and reliable source for anyone, from student to seasoned professional, looking to better understand the complex world of microlithography science and technology.
Download or read book Advanced Gate Stack Source Drain and Channel Engineering for Si Based CMOS 4 New Materials Processes and Equipment written by P. J. Timans and published by The Electrochemical Society. This book was released on 2008-05 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue describes processing, materials and equipment for CMOS front-end integration including gate stack, source/drain and channel engineering. Topics: strained Si/SiGe and Si/SiGe on insulator; high-mobility channels including III-V¿s, etc.; nanowires and carbon nanotubes; high-k dielectrics, metal and FUSI gate electrodes; doping/annealing for ultra-shallow junctions; low-resistivity contacts; advanced deposition (e.g. ALD, CVD, MBE), RTP, UV, plasma and laser-assisted processes.
Download or read book Design and Process Integration for Microelectronic Manufacturing written by and published by . This book was released on 2006 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stereolithography written by Paulo Jorge Bártolo and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereolithography: Materials, Processes and Applications will focus on recent advances in stereolithography covering aspects related to the most recent advances in the field, in terms of fabrication processes (two-photon polymerization, micro-stereolithography, infrared stereolithography and stereo-thermal-lithography), materials (novel resins, hydrogels for medical applications and highly reinforced resins with ceramics and metals), computer simulation and applications.
Download or read book Design and Process Integration for Microelectronic Manufacturing II sic written by Lars W. Liebmann and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Developing Holistic Strategic Management In The Advanced Ict Era written by Kodama Mitsuru and published by World Scientific. This book was released on 2019-09-19 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the lens of holistic systems theory, this book discusses strategic management adapted to evolving convergence in an era of advanced ICT from the viewpoint of the major management elements of strategy, organizations, technologies, operations and leadership.To discuss corporate change in response to such advanced technology in a theoretical and empirical manner, it is necessary not only to analyze and consider individual management elements such as strategy, organizations, technologies, operations and leadership in a piece-meal manner but also to determine the research issues from a framework based on a holistic management perspective through systems theory including interaction between and among the respective individual management elements (from micro to macro elements).Applying both innovation theory and capabilities theory, this book presents a new framework and knowledge for holistic strategic management from a systems theory lens that focuses on the issue of how major corporations can develop capabilities to achieve strategic innovation in response to the impacts of advanced ICT on corporate management.
