Download or read book Design for Manufacturability and Yield for Nano Scale CMOS written by Charles Chiang and published by Springer Science & Business Media. This book was released on 2007-06-15 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through all the aspects of manufacturability and yield in a nano-CMOS process. It covers all CAD/CAE aspects of a SOC design flow and addresses a new topic (DFM/DFY) critical at 90 nm and beyond. This book is a must read book the serious practicing IC designer and an excellent primer for any graduate student intent on having a career in IC design or in EDA tool development.
Download or read book Design For Manufacturability And Yield For Nano Scale Cmos written by Chiang and published by . This book was released on 2009-06-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale CMOS VLSI Circuits Design for Manufacturability written by Sandip Kundu and published by McGraw Hill Professional. This book was released on 2010-06-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-Edge CMOS VLSI Design for Manufacturability Techniques This detailed guide offers proven methods for optimizing circuit designs to increase the yield, reliability, and manufacturability of products and mitigate defects and failure. Covering the latest devices, technologies, and processes, Nanoscale CMOS VLSI Circuits: Design for Manufacturability focuses on delivering higher performance and lower power consumption. Costs, constraints, and computational efficiencies are also discussed in the practical resource. Nanoscale CMOS VLSI Circuits covers: Current trends in CMOS VLSI design Semiconductor manufacturing technologies Photolithography Process and device variability: analyses and modeling Manufacturing-Aware Physical Design Closure Metrology, manufacturing defects, and defect extraction Defect impact modeling and yield improvement techniques Physical design and reliability DFM tools and methodologies
Download or read book Yield Aware Analog IC Design and Optimization in Nanometer scale Technologies written by António Manuel Lourenço Canelas and published by Springer Nature. This book was released on 2020-03-20 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new methodology with reduced time impact to address the problem of analog integrated circuit (IC) yield estimation by means of Monte Carlo (MC) analysis, inside an optimization loop of a population-based algorithm. The low time impact on the overall optimization processes enables IC designers to perform yield optimization with the most accurate yield estimation method, MC simulations using foundry statistical device models considering local and global variations. The methodology described by the authors delivers on average a reduction of 89% in the total number of MC simulations, when compared to the exhaustive MC analysis over the full population. In addition to describing a newly developed yield estimation technique, the authors also provide detailed background on automatic analog IC sizing and optimization.
Download or read book Nano CMOS Design for Manufacturability written by Ban P. Wong and published by John Wiley & Sons. This book was released on 2008-12-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover innovative tools that pave the way from circuit and physical design to fabrication processing Nano-CMOS Design for Manufacturability examines the challenges that design engineers face in the nano-scaled era, such as exacerbated effects and the proven design for manufacturability (DFM) methodology in the midst of increasing variability and design process interactions. In addition to discussing the difficulties brought on by the continued dimensional scaling in conformance with Moore's law, the authors also tackle complex issues in the design process to overcome the difficulties, including the use of a functional first silicon to support a predictable product ramp. Moreover, they introduce several emerging concepts, including stress proximity effects, contour-based extraction, and design process interactions. This book is the sequel to Nano-CMOS Circuit and Physical Design, taking design to technology nodes beyond 65nm geometries. It is divided into three parts: Part One, Newly Exacerbated Effects, introduces the newly exacerbated effects that require designers' attention, beginning with a discussion of the lithography aspects of DFM, followed by the impact of layout on transistor performance Part Two, Design Solutions, examines how to mitigate the impact of process effects, discussing the methodology needed to make sub-wavelength patterning technology work in manufacturing, as well as design solutions to deal with signal, power integrity, WELL, stress proximity effects, and process variability Part Three, The Road to DFM, describes new tools needed to support DFM efforts, including an auto-correction tool capable of fixing the layout of cells with multiple optimization goals, followed by a look ahead into the future of DFM Throughout the book, real-world examples simplify complex concepts, helping readers see how they can successfully handle projects on Nano-CMOS nodes. It provides a bridge that allows engineers to go from physical and circuit design to fabrication processing and, in short, make designs that are not only functional, but that also meet power and performance goals within the design schedule.
Download or read book Nano scale CMOS Analog Circuits written by Soumya Pandit and published by CRC Press. This book was released on 2018-09-03 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability concerns and the limitations of process technology can sometimes restrict the innovation process involved in designing nano-scale analog circuits. The success of nano-scale analog circuit design requires repeat experimentation, correct analysis of the device physics, process technology, and adequate use of the knowledge database. Starting with the basics, Nano-Scale CMOS Analog Circuits: Models and CAD Techniques for High-Level Design introduces the essential fundamental concepts for designing analog circuits with optimal performances. This book explains the links between the physics and technology of scaled MOS transistors and the design and simulation of nano-scale analog circuits. It also explores the development of structured computer-aided design (CAD) techniques for architecture-level and circuit-level design of analog circuits. The book outlines the general trends of technology scaling with respect to device geometry, process parameters, and supply voltage. It describes models and optimization techniques, as well as the compact modeling of scaled MOS transistors for VLSI circuit simulation. • Includes two learning-based methods: the artificial neural network (ANN) and the least-squares support vector machine (LS-SVM) method • Provides case studies demonstrating the practical use of these two methods • Explores circuit sizing and specification translation tasks • Introduces the particle swarm optimization technique and provides examples of sizing analog circuits • Discusses the advanced effects of scaled MOS transistors like narrow width effects, and vertical and lateral channel engineering Nano-Scale CMOS Analog Circuits: Models and CAD Techniques for High-Level Design describes the models and CAD techniques, explores the physics of MOS transistors, and considers the design challenges involving statistical variations of process technology parameters and reliability constraints related to circuit design.
Download or read book Design for Manufacturability written by Artur Balasinski and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable guide for layout designers, packaging engineers and quality engineers, covering DfM development from 1D to 4D, involving IC design flow setup, best practices, links to manufacturing and product definition, for process technologies down to 22 nm node, and product families including memories, logic, system-on-chip and system-in-package.
Download or read book Reliability of Nanoscale Circuits and Systems written by Miloš Stanisavljević and published by Springer Science & Business Media. This book was released on 2010-10-20 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to give a general overview of reliability, faults, fault models, nanotechnology, nanodevices, fault-tolerant architectures and reliability evaluation techniques. Additionally, the book provides an in depth state-of-the-art research results and methods for fault tolerance as well as the methodology for designing fault-tolerant systems out of highly unreliable components.
Download or read book Nano CMOS Design for Manufacturability written by Ban P. Wong and published by Wiley-Interscience. This book was released on 2008-10-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover innovative tools that pave the way from circuit and physical design to fabrication processing Nano-CMOS Design for Manufacturability examines the challenges that design engineers face in the nano-scaled era, such as exacerbated effects and the proven design for manufacturability (DFM) methodology in the midst of increasing variability and design process interactions. In addition to discussing the difficulties brought on by the continued dimensional scaling in conformance with Moore's law, the authors also tackle complex issues in the design process to overcome the difficulties, including the use of a functional first silicon to support a predictable product ramp. Moreover, they introduce several emerging concepts, including stress proximity effects, contour-based extraction, and design process interactions. This book is the sequel to Nano-CMOS Circuit and Physical Design, taking design to technology nodes beyond 65nm geometries. It is divided into three parts: Part One, Newly Exacerbated Effects, introduces the newly exacerbated effects that require designers' attention, beginning with a discussion of the lithography aspects of DFM, followed by the impact of layout on transistor performance Part Two, Design Solutions, examines how to mitigate the impact of process effects, discussing the methodology needed to make sub-wavelength patterning technology work in manufacturing, as well as design solutions to deal with signal, power integrity, WELL, stress proximity effects, and process variability Part Three, The Road to DFM, describes new tools needed to support DFM efforts, including an auto-correction tool capable of fixing the layout of cells with multiple optimization goals, followed by a look ahead into the future of DFM Throughout the book, real-world examples simplify complex concepts, helping readers see how they can successfully handle projects on Nano-CMOS nodes. It provides a bridge that allows engineers to go from physical and circuit design to fabrication processing and, in short, make designs that are not only functional, but that also meet power and performance goals within the design schedule.
Download or read book Process Variations and Probabilistic Integrated Circuit Design written by Manfred Dietrich and published by Springer Science & Business Media. This book was released on 2011-11-20 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty in key parameters within a chip and between different chips in the deep sub micron area plays a more and more important role. As a result, manufacturing process spreads need to be considered during the design process. Quantitative methodology is needed to ensure faultless functionality, despite existing process variations within given bounds, during product development. This book presents the technological, physical, and mathematical fundamentals for a design paradigm shift, from a deterministic process to a probability-orientated design process for microelectronic circuits. Readers will learn to evaluate the different sources of variations in the design flow in order to establish different design variants, while applying appropriate methods and tools to evaluate and optimize their design.
Download or read book CMOS Nanoelectronics written by Nadine Collaert and published by CRC Press. This book was released on 2012-09-19 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers one of the most important device architectures that have been widely researched to extend the transistor scaling: FinFET. Starting with theory, the book discusses the advantages and the integration challenges of this device architecture. It addresses in detail the topics such as high-density fin patterning, gate stack design, and source/drain engineering, which have been considered challenges for the integration of FinFETs. The book also addresses circuit-related aspects, including the impact of variability on SRAM design, ESD design, and high-T operation. It discusses a new device concept: the junctionless nanowire FET.
Download or read book Semiconductors written by Artur Balasinski and published by CRC Press. This book was released on 2018-09-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the continuous evolution of integrated circuit manufacturing (ICM) and design for manufacturability (DfM), most books on the subject are obsolete before they even go to press. That’s why the field requires a reference that takes the focus off of numbers and concentrates more on larger economic concepts than on technical details. Semiconductors: Integrated Circuit Design for Manufacturability covers the gradual evolution of integrated circuit design (ICD) as a basis to propose strategies for improving return-on-investment (ROI) for ICD in manufacturing. Where most books put the spotlight on detailed engineering enhancements and their implications for device functionality, in contrast, this one offers, among other things, crucial, valuable historical background and roadmapping, all illustrated with examples. Presents actual test cases that illustrate product challenges, examine possible solution strategies, and demonstrate how to select and implement the right one This book shows that DfM is a powerful generic engineering concept with potential extending beyond its usual application in automated layout enhancements centered on proximity correction and pattern density. This material explores the concept of ICD for production by breaking down its major steps: product definition, design, layout, and manufacturing. Averting extended discussion of technology, techniques, or specific device dimensions, the author also avoids the clumsy chapter architecture that can hinder other books on this subject. The result is an extremely functional, systematic presentation that simplifies existing approaches to DfM, outlining a clear set of criteria to help readers assess reliability, functionality, and yield. With careful consideration of the economic and technical trade-offs involved in ICD for manufacturing, this reference addresses techniques for physical, electrical, and logical design, keeping coverage fresh and concise for the designers, manufacturers, and researchers defining product architecture and research programs.
Download or read book Nano CMOS Circuit and Physical Design written by Ban Wong and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the authors' expansive collection of notes taken over the years, Nano-CMOS Circuit and Physical Design bridges the gap between physical and circuit design and fabrication processing, manufacturability, and yield. This innovative book covers: process technology, including sub-wavelength optical lithography; impact of process scaling on circuit and physical implementation and low power with leaky transistors; and DFM, yield, and the impact of physical implementation.
Download or read book Timing Performance of Nanometer Digital Circuits Under Process Variations written by Victor Champac and published by Springer. This book was released on 2018-04-18 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the digital design of integrated circuits under process variations, with a focus on design-time solutions. The authors describe a step-by-step methodology, going from logic gates to logic paths to the circuit level. Topics are presented in comprehensively, without overwhelming use of analytical formulations. Emphasis is placed on providing digital designers with understanding of the sources of process variations, their impact on circuit performance and tools for improving their designs to comply with product specifications. Various circuit-level “design hints” are highlighted, so that readers can use then to improve their designs. A special treatment is devoted to unique design issues and the impact of process variations on the performance of FinFET based circuits. This book enables readers to make optimal decisions at design time, toward more efficient circuits, with better yield and higher reliability.
Download or read book Analog Circuit Design for Process Variation Resilient Systems on a Chip written by Marvin Onabajo and published by Springer Science & Business Media. This book was released on 2012-03-08 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes several techniques to address variation-related design challenges for analog blocks in mixed-signal systems-on-chip. The methods presented are results from recent research works involving receiver front-end circuits, baseband filter linearization, and data conversion. These circuit-level techniques are described, with their relationships to emerging system-level calibration approaches, to tune the performances of analog circuits with digital assistance or control. Coverage also includes a strategy to utilize on-chip temperature sensors to measure the signal power and linearity characteristics of analog/RF circuits, as demonstrated by test chip measurements. Describes a variety of variation-tolerant analog circuit design examples, including from RF front-ends, high-performance ADCs and baseband filters; Includes built-in testing techniques, linked to current industrial trends; Balances digitally-assisted performance tuning with analog performance tuning and mismatch reduction approaches; Describes theoretical concepts as well as experimental results for test chips designed with variation-aware techniques.
Download or read book Design Rules in a Semiconductor Foundry written by Eitan N. Shauly and published by CRC Press. This book was released on 2022-11-30 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays over 50% of integrated circuits are fabricated at wafer foundries. This book presents a foundry-integrated perspective of the field and is a comprehensive and up-to-date manual designed to serve process, device, layout, and design engineers. It comprises chapters carefully selected to cover topics relevant for them to deal with their work. The book provides an insight into the different types of design rules (DRs) and considerations for setting new DRs. It discusses isolation, gate patterning, S/D contacts, metal lines, MOL, air gaps, and so on. It explains in detail the layout rules needed to support advanced planarization processes, different types of dummies, and related utilities as well as presents a large set of guidelines and layout-aware modeling for RF CMOS and analog modules. It also discusses the layout DRs for different mobility enhancement techniques and their related modeling, listing many of the dedicated rules for static random-access memory (SRAM), embedded polyfuse (ePF), and LogicNVM. The book also provides the setting and calibration of the process parameters set and describes the 28~20 nm planar MOSFET process flow for low-power and high-performance mobile applications in a step-by-step manner. It includes FEOL and BEOL physical and environmental tests for qualifications together with automotive qualification and design for automotive (DfA). Written for the professionals, the book belongs to the bookshelf of microelectronic discipline experts.
Download or read book Computational Intelligence in Analog and Mixed Signal AMS and Radio Frequency RF Circuit Design written by Mourad Fakhfakh and published by Springer. This book was released on 2015-07-14 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the application of recent advances in computational intelligence – algorithms, design methodologies, and synthesis techniques – to the design of integrated circuits and systems. It highlights new biasing and sizing approaches and optimization techniques and their application to the design of high-performance digital, VLSI, radio-frequency, and mixed-signal circuits and systems. This first of two related volumes addresses the design of analog and mixed-signal (AMS) and radio-frequency (RF) circuits, with 17 chapters grouped into parts on analog and mixed-signal applications, and radio-frequency design. It will be of interest to practitioners and researchers in computer science and electronics engineering engaged with the design of electronic circuits.
