Download or read book Design for Manufacturability written by David M. Anderson and published by CRC Press. This book was released on 2014-02-04 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturability: How to Use Concurrent Engineering to Rapidly Develop Low-Cost, High-Quality Products for Lean Production shows how to use concurrent engineering teams to design products for all aspects of manufacturing with the lowest cost, the highest quality, and the quickest time to stable production. Extending the concepts of desi
Download or read book Design for Manufacturability written by Artur Balasinski and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable guide for layout designers, packaging engineers and quality engineers, covering DfM development from 1D to 4D, involving IC design flow setup, best practices, links to manufacturing and product definition, for process technologies down to 22 nm node, and product families including memories, logic, system-on-chip and system-in-package.
Download or read book Design for Manufacturability Concurrent Engineering written by David M. Anderson and published by . This book was released on 2003 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Manufacturability Handbook written by James G. Bralla and published by McGraw Hill Professional. This book was released on 1999 with total page 1361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a blueprint for various stages of the manufacturing process. This handbook provides directions for solid and practical design, including a quick check of do's and don'ts as well as specific tips for developing the most producible design. It also includes the details needed to forecast a successful design project.
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Design for Manufacturing written by Corrado Poli and published by Elsevier. This book was released on 2001-11-29 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturing assists anyone not familiar with various manufacturing processes in better visualizing and understanding the relationship between part design and the ease or difficulty of producing the part. Decisions made during the early conceptual stages of design have a great effect on subsequent stages. In fact, quite often more than 70% of the manufacturing cost of a product is determined at this conceptual stage, yet manufacturing is not involved. Through this book, designers will gain insight that will allow them to assess the impact of their proposed design on manufacturing difficulty. The vast majority of components found in commercial batch-manufactured products, such as appliances, computers and office automation equipment are either injection molded, stamped, die cast, or (occasionally) forged. This book emphasizes these particular, most commonly implemented processes. In addition to chapters on these processes, the book touches upon material process selection, general guidelines for determining whether several components should be combined into a single component or not, communications, the physical and mechanical properties of materials, tolerances, and inspection and quality control. In developing the DFM methods presented in this book, he has worked with over 30 firms specializing in injection molding, die-casting, forging and stamping. Implements a philosophy which allows for easier and more economic production of designs Educates designers about manufacturing Emphasizes the four major manufacturing processes
Download or read book Design for Manufacturability and Yield for Nano Scale CMOS written by Charles Chiang and published by Springer Science & Business Media. This book was released on 2007-06-15 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through all the aspects of manufacturability and yield in a nano-CMOS process. It covers all CAD/CAE aspects of a SOC design flow and addresses a new topic (DFM/DFY) critical at 90 nm and beyond. This book is a must read book the serious practicing IC designer and an excellent primer for any graduate student intent on having a career in IC design or in EDA tool development.
Download or read book Design for Manufacturability and Statistical Design written by Michael Orshansky and published by Springer Science & Business Media. This book was released on 2007-10-28 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturability and Statistical Design: A Comprehensive Approach presents a comprehensive overview of methods that need to be mastered in understanding state-of-the-art design for manufacturability and statistical design methodologies. Broadly, design for manufacturability is a set of techniques that attempt to fix the systematic sources of variability, such as those due to photolithography and CMP. Statistical design, on the other hand, deals with the random sources of variability. Both paradigms operate within a common framework, and their joint comprehensive treatment is one of the objectives of this book and an important differentation.
Download or read book Semiconductors written by Artur Balasinski and published by CRC Press. This book was released on 2018-09-03 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the continuous evolution of integrated circuit manufacturing (ICM) and design for manufacturability (DfM), most books on the subject are obsolete before they even go to press. That’s why the field requires a reference that takes the focus off of numbers and concentrates more on larger economic concepts than on technical details. Semiconductors: Integrated Circuit Design for Manufacturability covers the gradual evolution of integrated circuit design (ICD) as a basis to propose strategies for improving return-on-investment (ROI) for ICD in manufacturing. Where most books put the spotlight on detailed engineering enhancements and their implications for device functionality, in contrast, this one offers, among other things, crucial, valuable historical background and roadmapping, all illustrated with examples. Presents actual test cases that illustrate product challenges, examine possible solution strategies, and demonstrate how to select and implement the right one This book shows that DfM is a powerful generic engineering concept with potential extending beyond its usual application in automated layout enhancements centered on proximity correction and pattern density. This material explores the concept of ICD for production by breaking down its major steps: product definition, design, layout, and manufacturing. Averting extended discussion of technology, techniques, or specific device dimensions, the author also avoids the clumsy chapter architecture that can hinder other books on this subject. The result is an extremely functional, systematic presentation that simplifies existing approaches to DfM, outlining a clear set of criteria to help readers assess reliability, functionality, and yield. With careful consideration of the economic and technical trade-offs involved in ICD for manufacturing, this reference addresses techniques for physical, electrical, and logical design, keeping coverage fresh and concise for the designers, manufacturers, and researchers defining product architecture and research programs.
Download or read book Design for Excellence in Electronics Manufacturing written by Cheryl Tulkoff and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: DESIGN FOR EXCELLENCE IN ELECTRONICS MANUFACTURING An authoritative guide to optimizing design for manufacturability and reliability from a team of experts Design for Excellence in Electronics Manufacturing is a comprehensive, state-of-the-art book that covers design and reliability of electronics. The authors—noted experts on the topic—explain how using the DfX concepts of design for reliability, design for manufacturability, design for environment, design for testability, and more, reduce research and development costs and decrease time to market and allow companies to confidently issue warranty coverage. By employing the concepts outlined in Design for Excellence in Electronics Manufacturing, engineers and managers can increase customer satisfaction, market share, and long-term profits. In addition, the authors describe the best practices regarding product design and show how the practices can be adapted for different manufacturing processes, suppliers, use environments, and reliability expectations. This important book: Contains a comprehensive review of the design and reliability of electronics Covers a range of topics: establishing a reliability program, design for the use environment, design for manufacturability, and more Includes technical information on electronic packaging, discrete components, and assembly processes Shows how aspects of electronics can fail under different environmental stresses Written for reliability engineers, electronics engineers, design engineers, component engineers, and others, Design for Excellence in Electronics Manufacturing is a comprehensive book that reveals how to get product design right the first time.
Download or read book Processes and Design for Manufacturing written by Sherif D. El Wakil and published by Brooks/Cole. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive and in-depth coverage of manufacturing processes from the standpoint of the product designer. Reflecting a growing need in industry and education for design-driven instruction, this book demonstrates the importance of considering the selection of manufacturing method early in the design process, illustrating how the selection of method directly affects the geometric characteristics of products. Beginning with a study of the design process itself in Chapter 1, readers are taken through the product development process, with concurrent engineering presented in Chapter 2 (new to this Second Edition) and cost - as a factor affecting design and manufacturability - covered in a new Chapter 11. Augmenting the book's design orientation are new chapters on design for assemble (Chapter 12) and environmentally conscious design and manufacturing (Chapter 13). The book also includes a wealth of worked-out design examples and design projects (in Chapters 3-11), and an appendix on materials engineering that explains how materials are selected in the design of products. This book provides engineers and product designers with solidly quantitative, design-driven discussion of manufacturing processes that supports a systems approach to manufacturing.
Download or read book Design for Manufacturing and Assembly written by O. Molloy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to compete in the current commercial environment companies must produce greater product variety, at lower cost, all within a reduced product life cycle. To achieve this, a concurrent engineering philosophy is often adopted. In many cases the main realization of this is Design for Manufacture and Assembly (DFM/A). There is a need for in-depth study of the architectures for DFM/A systems in order that the latest software and knowledge-based techniques may be used to deliver the DFM/A systems of tomorrow. This architecture must be based upon complete understanding of the issues involved in integrating the design and manufacturing domains. This book provides a comprehensive view of the capabilities of advanced DFM/A systems based on a common architecture.
Download or read book The Design and Manufacture of Medical Devices written by J. Paulo Davim and published by Elsevier. This book was released on 2012-10-16 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical devices play an important role in the field of medical and health technology, and encompass a wide range of health care products. Directive 2007/47/EC defines a medical device as any instrument, apparatus, appliance, software, material or other article, whether used alone or in combination, including the software intended by its manufacturer to be used specifically for diagnostic and/or therapeutic purposes and necessary for its proper application, intended by the manufacturer to be used for human beings. The design and manufacture of medical devices brings together a range of articles and case studies dealing with medical device R&D. Chapters in the book cover materials used in medical implants, such as Titanium Oxide, polyurethane, and advanced polymers; devices for specific applications such as spinal and craniofacial implants, and other issues related to medical devices, such as precision machining and integrated telemedicine systems. Contains articles on a diverse range of subjects within the field, with internationally renowned specialists discussing each medical device Offers a practical approach to recent developments in the design and manufacture of medical devices Presents a topic that is the focus of research in many important universities and centres of research worldwide
Download or read book Materials Enabled Designs written by Michael Pfeifer and published by Butterworth-Heinemann. This book was released on 2009-06-02 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are books aplenty on materials selection criteria for engineering design. Most cover the physical and mechanical properties of specific materials, but few offer much in the way of total product design criteria. This innovative new text/reference will give the “Big picture view of how materials should be selected—not only for a desired function but also for their ultimate performance, durability, maintenance, replacement costs, and so on. Even such factors as how a material behaves when packaged, shipped, and stored will be taken into consideration. For without that knowledge, a design engineer is often in the dark as to how a particular material used in particular product or process is going to behave over time, how costly it will be, and, ultimately, how successful it will be at doing what is supposed to do. This book delivers that knowledge. * Brief but comprehensive review of major materials functional groups (mechanical, electrical, thermal, chemical) by major material categories (metals, polymers, ceramics, composites) * Invaluable guidance on selection criteria at early design stage, including such factors as functionality, durability, and availability * Insight into lifecycle factors that affect choice of materials beyond simple performance specs, including manufacturability, machinability, shelf life, packaging, and even shipping characteristics * Unique help on writing materials selection specifications
Download or read book Manufacturing and Design written by Erik Tempelman and published by Elsevier. This book was released on 2014-03-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Design presents a fresh view on the world of industrial production: thinking in terms of both abstraction levels and trade-offs. The book invites its readers to distinguish between what is possible in principle for a certain process (as determined by physical law); what is possible in practice (the production method as determined by industrial state-of-the-art); and what is possible for a certain supplier (as determined by its production equipment). Specific processes considered here include metal forging, extrusion, and casting; plastic injection molding and thermoforming; additive manufacturing; joining; recycling; and more. By tackling the field of manufacturing processes from this new angle, this book makes the most out of a reader's limited time. It gives the knowledge needed to not only create well-producible designs, but also to understand supplier needs in order to find the optimal compromise. Apart from improving design for production, this publication raises the standards of thinking about producibility. Emphasizes the strong link between product design and choice of manufacturing process Introduces the concept of a "production triangle" to highlight tradeoffs between function, cost, and quality for different manufacturing methods Balanced sets of questions are included to stimulate the reader's thoughts Each chapter ends information on the production methods commonly associated with the principle discussed, as well as pointers for further reading Hints to chapter exercises and an appendix on long exercises with worked solutions available on the book's companion site: http://booksite.elsevier.com/9780080999227/
Download or read book Design for Manufacturability written by David M. Anderson (Engineer) and published by . This book was released on 2001 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Advanced Manufacturing Technologies and Processes written by LaRoux K. Gillespie and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites
