Download or read book Dynamic Loading and Design of Structures written by Andreas Kappos and published by CRC Press. This book was released on 2001-10-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, information on the dynamic loading of structures has been widely scattered. No other book has examined the different types of loading in a comprehensive and systematic manner, and looked at their signficance in the design process. The book begins with a survey of the probabilistic background to all forms of loads, which is particularly important to dynamic loads, and then looks at the main types in turn: wind, earthquake, wave, blast and impact loading. The relevant code provisions (Eurocode and UBC American) are detailed and a number of examples are used to illustrate the principles. A final section covers the analysis for dynamic loading, drawing out the concepts underlying the treatment of all dynamic loads, and the corresponding modelling techniques. Throughout there is a focus on the modelling of structures, rather than on classical structural dynamics.

Download or read book Structural Design for Dynamic Loads written by Charles Head Norris and published by . This book was released on 1959 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Impact Factors for Bridges written by David I. McLean and published by Transportation Research Board. This book was released on 1998 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state department of transportation and consulting bridge, structural, and research engineers. The synthesis describes the current state of the practice for determining dynamic impact factors for bridges. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and foreign sources. This report of the Transportation Research Board documents relevant background and recent information with regard to vehicular dynamic load effects on bridges. It provides details on the basic concepts of bridge dynamics, including identification of the main variables affecting bridge dynamic response. In addition, current code provisions for accounting for vehicular dynamic load effects for new bridge design and load evaluation of existing bridges are reported, including a discussion on the background of the provisions. Finally, a discussion of observed field problems associated with vehicular dynamic load effects, as obtained from the survey, are included.

Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by Springer. This book was released on 2014-05-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.

Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.

Download or read book Using Dynamic Analysis for Compact Gear Design written by and published by . This book was released on 1998 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents procedures for designing compact spur gear sets with the objective of minimizing the gear size. The allowable tooth stress and dynamic response are incorporated in the process to obtain a feasible design region. Various dynamic rating factors were investigated and evaluated. The constraints of contact stress limits and involute interference combined with the tooth bending strength provide the main criteria for this investigation. A three-dimensional design space involving the gear size, diametral pitch, and operating speed was developed to illustrate the optimal design of spur gear pairs. The study performed here indicates that as gears operate over a range of speeds, variations in the dynamic response change the required gear size in a trend that parallels the dynamic factor. The dynamic factors are strongly affected by the system natural frequencies. The peak values of the dynamic factor within the operating speed range significantly influence the optimal gear designs. The refined dynamic factor introduced in this study yields more compact designs than AGMA dynamic factors.

Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.

Download or read book Static and Dynamic Analysis of Engineering Structures written by Levon G. Petrosian and published by John Wiley & Sons. This book was released on 2020-05-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to the theory and practice of static and dynamic structures analysis Static and Dynamic Analysis of Engineering Structures examines static and dynamic analysis of engineering structures for methodological and practical purposes. In one volume, the authors – noted engineering experts – provide an overview of the topic and review the applications of modern as well as classic methods of calculation of various structure mechanics problems. They clearly show the analytical and mechanical relationships between classical and modern methods of solving boundary value problems. The first chapter offers solutions to problems using traditional techniques followed by the introduction of the boundary element methods. The book discusses various discrete and continuous systems of analysis. In addition, it offers solutions for more complex systems, such as elastic waves in inhomogeneous media, frequency-dependent damping and membranes of arbitrary shape, among others. Static and Dynamic Analysis of Engineering Structures is filled with illustrative examples to aid in comprehension of the presented material. The book: Illustrates the modern methods of static and dynamic analysis of structures; Provides methods for solving boundary value problems of structural mechanics and soil mechanics; Offers a wide spectrum of applications of modern techniques and methods of calculation of static, dynamic and seismic problems of engineering design; Presents a new foundation model. Written for researchers, design engineers and specialists in the field of structural mechanics, Static and Dynamic Analysis of Engineering Structures provides a guide to analyzing static and dynamic structures, using traditional and advanced approaches with real-world, practical examples.

Download or read book Behavior of Flexible Cylinders Buried in Sand Under Static and Dynamic Loading written by Gayle E. Albritton and published by . This book was released on 1968 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The general objective of the investigation was to study experimentally the behavior to failure of flexible, horizontally oriented cylinders buried at various depths in dense, dry sand and subjected to either static or dynamic surface overpressures. Static and dynamic tests were conducted on 33 different cylinders, fabricated of high-yield-strength aluminum. Results indicated that collapse of the cylinders occurred while the strains in the cylinder walls were still in the elastic range. The cylinders buried at the shallow depths (zero to one-half cylinder diameter above the crown) collapsed by a catastrophic snap-through or caving of the crown. For the cylinders buried at depths of three-quarters to two cylinder diameters above the crown, the mode of collapse was an instantaneous elastic buckle that occurred at the spring line or invert of the cylinder. The collapse mode of the cylinders under dynamic overpressure was similar to that of the cylinders collapsing under static overpressure. The results of the investigation verified the applicability of an equation for predicting the static collapse overpressure for smooth-walled, horizontally oriented, buried cylindrical structures and entranceways. The hoop-compression theory was found to be applicable for analyzing the structural design to determine if the cylinder would collapse in the elastic range. (Author).

Download or read book Dynamic Power Management written by Luca Benini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic power management is a design methodology aiming at controlling performance and power levels of digital circuits and systems, with the goal of extending the autonomous operation time of battery-powered systems, providing graceful performance degradation when supply energy is limited, and adapting power dissipation to satisfy environmental constraints. Dynamic Power Management: Design Techniques and CAD Tools addresses design techniques and computer-aided design solutions for power management. Different approaches are presented and organized in an order related to their applicability to control-units, macro-blocks, digital circuits and electronic systems, respectively. All approaches are based on the principle of exploiting idleness of circuits, systems, or portions thereof. They involve both the detection of idleness conditions and the freezing of power-consuming activities in the idle components. The book also describes some approaches to system-level power management, including Microsoft's OnNow architecture and the `Advanced Configuration and Power Management' standard proposed by Intel, Microsoft and Toshiba. These approaches migrate power management to the software layer running on hardware platforms, thus providing a flexible and self-configurable solution to adapting the power/performance tradeoff to the needs of mobile (and fixed) computing and communication. Dynamic Power Management: Design Techniques and CAD Tools is of interest to researchers and developers of computer-aided design tools for integrated circuits and systems, as well as to system designers.

Download or read book Static and Dynamic Shear Behavior of Uniformly Loaded Reinforced Concrete Deep Beams written by Robert A. Crist and published by . This book was released on 1971 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behavioral equations were developed for reinforced concrete deep beams, especially in the realm of shear capacity. A series of static and dynamic beam tests was performed to aid in the development of this objective. Static shear behavior equations for deep beams were derived on the lower boundary of reinforced concrete deep beam data represented by research from this report and other research comprising 73 tests. Equations for a total static shear capacity are given which conservatively predict shear capacities of the beam tests considered. (Author).

Download or read book A Method for Designing Deep Underground Structures Subjected to Dynamic Loads written by James L. Drake and published by . This book was released on 1976 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes solutions to a class of dynamic elastoplastic problems that model some of the salient features of the response of hardened underground facilities in rock. The theoretical model consisted of multilayered concentric cylinders of elastoplastic materials with time-dependent loads applied to the exterior boundary. Each element in the cross section was assumed to be incompressible and its yield governed by a Mohr-Coulomb failure criterion. The number of elements within the cross section was not limited. Solutions of the theoretical model were cast in the general form normally used in structural dynamics: Mass x Acceleration = External applied load - Internal resistance. The resulting equations can be quickly and inexpensively evaluated on a digital computer. To extend the range of validity of the exact theory, a first-order correction factor was developed to account for the compressibility of the materials, and a simple method to treat backpacked structures was introduced. The theory was verified by comparing calculated values with experimental measurements from small-scale static and explosively driven tunnel collapse studies. Good agreement was noted for all cases considered. (Author).

Download or read book Dynamic Loading and Design of Structures written by Andreas J Kappos and published by . This book was released on 2000-11-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Response of Buried MX Vertical Shelters to Dynamic Loading written by Gayle E. Albritton and published by . This book was released on 1981 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Optimization written by Franklin Y. Cheng and published by CRC Press. This book was released on 2017-12-21 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s biggest structural engineering challenge is to design better structures, and a key issue is the need to take an integrated approach which balances control of costs with the requirement for handling earthquakes and other dynamic forces. Structural optimization is based on rigorous mathematical formulation and requires computation algorithms for sizing structural elements and synthesizing systems. Now that the right software and enough computing power are readily available, professionals can now develop a suite of alternative designs and a select suitable one. A thoroughly-written and practical book on structural optimization is long overdue. This solid book comprehensively presents current optimization strategies, illustrated with sufficient examples of the design of elements and systems and presenting descriptions of the process and results. Emphasis is given to dynamic loading, in particular to seismic forces. Researchers and practising engineers will find this book an excellent reference, and advanced undergraduates or graduate students can use it as a resource for structural optimization design.

Download or read book Behavior of Reinforced Concrete Deep Beams Under Static and Dynamic Loading written by Fred W. Beaufait and published by . This book was released on 1967 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mark s Calculations For Machine Design written by Thomas H. Brown and published by McGraw Hill Professional. This book was released on 2005-02-24 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everyday Engineers must solve some of the most difficult design problems and often with little time and money to spare. It was with this in mind that this book was designed. Based on the best selling Mark’s Standard Handbook for Mechanical Engineers, Mark’s Standard Engineering Calculations For Machine Design offers a detailed treatment of topics in statics, friction, kinematics, dynamics, energy relations, impulse and momentum, systems of particles, variable mass systems, and three-dimensional rigid body analysis. Among the advanced topics are spherical coordinates, shear modulus tangential unit vector tension, deformable media, and torsion (twisting).