Download or read book Handbook of Plastic Optics written by Stefan Bäumer and published by John Wiley & Sons. This book was released on 2011-02-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: A coherent overview of the current status of injection molded optics, describing in detail all aspects of plastic optics, from design issues to production technology and quality control. This updated second edition is supplemented by a chapter on the equipment and process of injection wells as well as a look at recent applications. The contributors, each one a leading expert in their discipline, have either a background in or strong ties to the industry, thus combining a large amount of practical experience. With its focus firmly set on practical applications, this is an indispensable reference for all those working in optics research and development.
Download or read book Ultra precision High Performance Cutting written by Ekkard Brinksmeier and published by Springer Nature. This book was released on 2021-09-20 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the research report of the DFG Research Unit FOR 1845 (2014-2020) of the Universities of Bremen and Hannover. The thematic focus lies on speeding up ultra-precision machining technology by following a holistic approach to high-performance cutting. This includes ultra-precision milling at high spindle speeds (>10000 rpm), precision tool setting mechanisms for multi-cutting-edge diamond milling tools, magnetic levitation technology for high velocity feed axes, and dedicated control strategies for error identification and compensation at high speeds. Furthermore, automation and measurement aspects of the machine setup process especially for precision balancing of the spindle rotors are presented. Finally, it is demonstrated that how the developed technologies may be integrated into a common machine tool setup. The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.
Download or read book Molded Optics written by Michael Schaub and published by CRC Press. This book was released on 2016-04-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: While several available texts discuss molded plastic optics, none provide information on all classes of molded optics. Filling this gap, Molded Optics: Design and Manufacture presents detailed descriptions of molded plastic, glass, and infrared optics. Since an understanding of the manufacturing process is necessary to develop cost-effective, produ
Download or read book Fabrication of Complex Optical Components written by Ekkard Brinksmeier and published by Springer Science & Business Media. This book was released on 2012-09-13 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: High quality optical components for consumer products made of glass and plastic are mostly fabricated by replication. This highly developed production technology requires several consecutive, well-matched processing steps called a "process chain" covering all steps from mold design, advanced machining and coating of molds, up to the actual replication and final precision measurement of the quality of the optical components. Current market demands for leading edge optical applications require high precision and cost effective parts in large volumes. For meeting these demands it is necessary to develop high quality process chains and moreover, to crosslink all demands and interdependencies within these process chains. The Transregional Collaborative Research Center "Process chains for the replication of complex optical elements" at Bremen, Aachen and Stillwater worked extensively and thoroughly in this field from 2001 to 2012. This volume will present the latest scientific results for the complete process chain giving a profound insight into present-day high-tech production.
Download or read book Handbook of Plastic Optics written by Stefan Bäumer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic optics instead of glass offers a number of advantages. Most importantly, it is far less expensive, and therefore opens a huge potential for mass production. It also offers the opportunity to use unique element configuration. This book gives a coherent overview over the current status of injection molded optics describing in detail all aspects of plastic optics, from design issues to production technology and quality control. The focus is firmly set on practical applications, making this an indispensable information source for all those working in optics research and development. The contributors, each one a leading expert in his chosen discipline, possess either a background in industry or close relations to the industry, thus bringing in an ample amount of practical experience.
Download or read book Advanced Metrology written by X. Jane Jiang and published by Academic Press. This book was released on 2020-04-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Metrology: Freeform Surfaces provides the perfect guide for engineering designers and manufacturers interested in exploring the benefits of this technology. The inclusion of industrial case studies and examples will help readers to implement these techniques which are being developed across different industries as they offer improvements to the functional performance of products and reduce weight and cost. - Includes case studies in every chapter to help readers implement the techniques discussed - Provides unique advice from industry on hot subjects, including surface description and data processing - Features links to online content, including video, code and software
Download or read book Materials Science and Technology of Optical Fabrication written by Tayyab I. Suratwala and published by John Wiley & Sons. This book was released on 2018-10-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental science of grinding and polishing by examining the chemical and mechanical interactions over many scale lengths Manufacturing next generation optics has been, and will continue to be, enablers for enhancing the performance of advanced laser, imaging, and spectroscopy systems. This book reexamines the age-old field of optical fabrication from a materials-science perspective, specifically the multiple, complex interactions between the workpiece (optic), slurry, and lap. It also describes novel characterization and fabrication techniques to improve and better understand the optical fabrication process, ultimately leading to higher quality optics with higher yield. Materials Science and Technology of Optical Fabrication is divided into two major parts. The first part describes the phenomena and corresponding process parameters affecting both the grinding and polishing processes during optical fabrication. It then relates them to the critical resulting properties of the optic (surface quality, surface figure, surface roughness, and material removal rate). The second part of the book covers a number of related topics including: developed forensic tools used to increase yield of optics with respect to surface quality (scratch/dig) and fracture loss; novel characterization and fabrication techniques used to understand/quantify the fundamental phenomena described in the first part of the book; novel and recent optical fabrication processes and their connection with the fundamental interactions; and finally, special techniques utilized to fabricate optics with high damage resistance. Focuses on the fundamentals of grinding and polishing, from a materials science viewpoint, by studying the chemical and mechanical interactions/phenomena over many scale lengths between the workpiece, slurry, and lap Explains how these phenomena affect the major characteristics of the optic workpiece—namely surface figure, surface quality, surface roughness, and material removal rate Describes methods to improve the major characteristics of the workpiece as well as improve process yield, such as through fractography and scratch forensics Covers novel characterization and fabrication techniques used to understand and quantify the fundamental phenomena of various aspects of the workpiece or fabrication process Details novel and recent optical fabrication processes and their connection with the fundamental interactions Materials Science and Technology of Optical Fabrication is an excellent guidebook for process engineers, fabrication engineers, manufacturing engineers, optical scientists, and opticians in the optical fabrication industry. It will also be helpful for students studying material science and applied optics/photonics.
Download or read book Micro and Precision Manufacturing written by Kapil Gupta and published by Springer. This book was released on 2017-10-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details on various micro and precision manufacturing and finishing operations performed by conventional and advanced processes, including micro-manufacturing of micro-tools and precision finishing of engineered components. It describes the process mechanism, principles and parameters while performing micro-fabrication and precision finishing operations. The text provides the readers with knowledge of micro and precision manufacturing and encourages them to explore the future venues in this field.
Download or read book Nonimaging Fresnel Lenses written by Ralf Leutz and published by Springer. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed and comprehensive account of the engineering of the world’s first nonimaging Fresnel lens solar concentrator. The book closes a gap in solar concentrator design, and describes nonimaging refractive optics and its numerical mathematics. The book shows the reader how to find his or her own optical solution using the rules and methodologies covering the design and the assessment of the nonimaging lens.
Download or read book Three dimensional Printing of Optics written by Manuel Rank and published by . This book was released on 2018 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microlens Arrays written by Dan Daly and published by CRC Press. This book was released on 2000-11-23 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The general trend towards miniaturisation and parallelism in optics and electro-optics has led to a requirement for arrays of sub-millimetre sized lenses. Thus, the demand for these microlens arrays has increased dramatically over recent years. Dan Daly's book describes the technology of microlens arrays and provides a recipe for producing them. It surveys the many fabrication techniques and discusses the numerous applications which either require or enhanced by the use of microlens arrays. This book gives a full description of the processes involved in production and limitations of the techniques. Processes looked at include the Thermal Reflow of Photoresist technique and the Silicon Elastomer Replication Process. As the measurement of microlenses is an intrinsic part of the production process, the methods which can be used to evaluate lens performance are explained.
Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
Download or read book Optical Coherence Tomography and Its Non medical Applications written by Michael Wang and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical coherence tomography (OCT) is a promising non-invasive non-contact 3D imaging technique that can be used to evaluate and inspect material surfaces, multilayer polymer films, fiber coils, and coatings. OCT can be used for the examination of cultural heritage objects and 3D imaging of microstructures. With subsurface 3D fingerprint imaging capability, OCT could be a valuable tool for enhancing security in biometric applications. OCT can also be used for the evaluation of fastener flushness for improving aerodynamic performance of high-speed aircraft. More and more OCT non-medical applications are emerging. In this book, we present some recent advancements in OCT technology and non-medical applications.
Download or read book Machine Tool Metrology written by Graham T. Smith and published by Springer. This book was released on 2016-04-06 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field.
Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
Download or read book Optomechanical Systems Engineering written by Keith J. Kasunic and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental principles behind optomechanical design This book emphasizes a practical, systems-level overview of optomechanical engineering, showing throughout how the requirements on the optical system flow down to those on the optomechanical design. The author begins with an overview of optical engineering, including optical fundamentals as well as the fabrication and alignment of optical components such as lenses and mirrors. The concepts of optomechanical engineering are then applied to the design of optical systems, including the structural design of mechanical and optical components, structural dynamics, thermal design, and kinematic design. Optomechanical Systems Engineering: Reviews the fundamental concepts of optical engineering as they apply to optomechanical design Illustrates the fabrication and alignment requirements typically found in an optical system Examines the elements of structural design from a mechanical, optical, and vibrational viewpoint Develops the thermal management principles of temperature and distortion control Describes the optomechanical requirements for kinematic and semi-kinematic mounts Uses examples and case studies to illustrate the concepts and equations presented in the book Provides supplemental materials on a companion website Focusing on fundamental concepts and first-order estimates of optomechanical system performance, Optomechanical Systems Engineering is accessible to engineers, scientists, and managers who want to quickly master the principles of optomechanical engineering.
