Download or read book Rehabilitation Robotics Challenges in Design Control and Real Applications written by Francisco Romero Sánchez and published by Frontiers Media SA. This book was released on 2022-08-31 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rehabilitation Robotics written by Roberto Colombo and published by Academic Press. This book was released on 2018-03-08 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation Robotics gives an introduction and overview of all areas of rehabilitation robotics, perfect for anyone new to the field. It also summarizes available robot technologies and their application to different pathologies for skilled researchers and clinicians. The editors have been involved in the development and application of robotic devices for neurorehabilitation for more than 15 years. This experience using several commercial devices for robotic rehabilitation has enabled them to develop the know-how and expertise necessary to guide those seeking comprehensive understanding of this topic. Each chapter is written by an expert in the respective field, pulling in perspectives from both engineers and clinicians to present a multi-disciplinary view. The book targets the implementation of efficient robot strategies to facilitate the re-acquisition of motor skills. This technology incorporates the outcomes of behavioral studies on motor learning and its neural correlates into the design, implementation and validation of robot agents that behave as 'optimal' trainers, efficiently exploiting the structure and plasticity of the human sensorimotor systems. In this context, human-robot interaction plays a paramount role, at both the physical and cognitive level, toward achieving a symbiotic interaction where the human body and the robot can benefit from each other's dynamics. - Provides a comprehensive review of recent developments in the area of rehabilitation robotics - Includes information on both therapeutic and assistive robots - Focuses on the state-of-the-art and representative advancements in the design, control, analysis, implementation and validation of rehabilitation robotic systems

Download or read book Control Systems Design of Bio Robotics and Bio Mechatronics with Advanced Applications written by Ahmad Taher Azar and published by Academic Press. This book was released on 2019-11-30 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Systems Design of Bio-Robotics and Bio-Mechatronics with Advanced Applications delivers essential and advanced bioengineering information on the application of control and robotics technologies in the life sciences. Judging by what we have witnessed so far, this exciting field of control systems and robotics in bioengineering is likely to produce revolutionary breakthroughs over the next decade. While this book is intended for senior undergraduate or graduate students in both control engineering and biomedical engineering programs, it will also appeal to medical researchers and practitioners who want to enhance their quantitative understanding of physiological processes. - Focuses on the engineering and scientific principles underlying the extraordinary performance of biomedical robotics and bio-mechatronics - Demonstrates the application of principles for designing corresponding algorithms - Presents the latest innovative approaches to medical diagnostics and procedures, as well as clinical rehabilitation from the point-of-view of dynamic modeling, system analysis and control

Download or read book Wearable Robotics written by Jacob Rosen and published by Academic Press. This book was released on 2019-11-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wearable Robotics: Systems and Applications provides a comprehensive overview of the entire field of wearable robotics, including active orthotics (exoskeleton) and active prosthetics for the upper and lower limb and full body. In its two major sections, wearable robotics systems are described from both engineering perspectives and their application in medicine and industry. Systems and applications at various levels of the development cycle are presented, including those that are still under active research and development, systems that are under preliminary or full clinical trials, and those in commercialized products. This book is a great resource for anyone working in this field, including researchers, industry professionals and those who want to use it as a teaching mechanism. - Provides a comprehensive overview of the entire field, with both engineering and medical perspectives - Helps readers quickly and efficiently design and develop wearable robotics for healthcare applications

Download or read book Big data analytics for smart healthcare applications written by Celestine Iwendi and published by Frontiers Media SA. This book was released on 2023-04-17 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Engineering And Automation Proceedings Of The International Conference On Electrical Engineering And Automation Eea2016 written by Xiaoxing Zhang and published by World Scientific. This book was released on 2017-04-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2016 International Conference on Electrical Engineering and Automation (EEA2016) was held in Hong Kong, China from June 24th-26th, 2016. EEA2016 has provided a platform for leading academic scientists, researchers, scholars and students around the world, to get together to compare notes, and share their results and findings, in areas of Electronics Engineering and Electrical Engineering, Materials and Mechanical Engineering, Control and Automation Modeling and Simulation, Testing and Imaging, Robotics, Actuating and Sensoring.The conference had received a total of 445 submissions. However, after peer review by the Technical Program Committee only 129 were selected to be included in this conference proceedings; based on their originality, ability to test ideas, and contribution to the understanding and advancement in Electronics and Electrical Engineering.

Download or read book Peripheral Nervous System Machine Interfaces 2nd Edition written by Michael Wininger and published by Frontiers Media SA. This book was released on 2018-06-19 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: For 5 years, the Peripheral Nervous System-Machine Interfaces workgroup has dedicated itself to the recruitment of researchers, clinicians, and general public in a unified effort to advance the frontier of restoration of quality of life to those with limb deficiency. Our group's mission is to bring together experts from various domains to identify promising new technologies and new opportunities for inquiry and discovery in prosthetics research. This e-Book collects 10 cutting edge research articles written by members of the workgroup, covering three domains prioritized by the workgroup: novel prosthetic technology, approaches for reducing device rejection, and prosthetic control. In our summary editorial, we four principals of the workgroup reflect on our first 5 years, and project our vision for the future, as the Society for Prosthetics.

Download or read book Proceedings of the International Conference on Vocational Education Applied Science and Technology ICVEAST 2023 written by Debrina Vita Ferezagia and published by Springer Nature. This book was released on 2023-10-30 with total page 1047 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. International Conference on Vocational Education Applied Science and Technology (ICVEAST), formerly known as International Conference on Vocation for Higher Education (ICVHE), is an annual event organized by the Vocational Education Program, Universitas Indonesia, that aims to encourage innovative applied research in vocational higher education. In 2022, we rebranded the conference to focus on being an international forum where scholars and practitioners share their ideas on vocational education, especially within applied science and technology. The rebranding from ICVHE to ICVEAST marks our fifth conference. This year, we present our sixth conference, with the theme, “VOCATIONAL 5.0: Virtuosity Collaboration for Sustainability Development and Innovative Technologies Goals 5.0”. Collaboration for sustainability development is a crucial part of achieving a sustainable future. It involves working with stakeholders, such as governments, businesses, non-governmental organizations, and communities, to develop and implement sustainable solutions. These stakeholders can pool their resources, knowledge, and expertise by working together to create innovative solutions that benefit the environment and society. The collaboration also helps ensure that all stakeholders are on the same page regarding sustainability goals and objectives. By building relationships and trust between stakeholders, collaboration can help to create a more sustainable future. Innovative Technology Goal 5.0 focuses on using technology to improve access to education and foster a culture of innovation and creativity. It seeks to create a more equitable and inclusive learning environment by providing access to digital tools and resources for all students, regardless of background or ability. It also seeks to promote technology to support the development of 21st-century skills, such as critical thinking, problem-solving, and collaboration. Finally, it aims to ensure that technology is used to support the development of a safe and secure learning environment while encouraging responsible and ethical use. VOCATIONAL 5.0 is a collaborative effort to promote sustainable development and innovative technology goals. It is designed to bring together experts from various fields, including business, education, government, and the non-profit sector, to identify and develop innovative solutions to global challenges. Through the use of data-driven decision-making and the application of new technologies, VOCATIONAL 5.0 seeks to create a more sustainable and equitable world. The initiative also aims to foster collaboration between stakeholders, create a platform for knowledge sharing, and promote the use of technology to drive social, economic, and environmental progress. By leveraging the collective expertise of its members, VOCATIONAL 5.0 is committed to achieving its sustainable development and innovative technology goals. This ICVEAST aims to be a respected international forum to discuss the recent improvement and challenges in Vocational Education nowadays and in the future, from the research insight, mainly applied research in the field of administration and business, health science, social humanities, and engineering. The event will gather representatives from different countries, diverse areas of knowledge, and lots of education, research, public institutions, and organizations. The conference is devised as a space to exchange ideas and discuss the challenges that education and manufacturing face in preparing human capabilities to shift into the current trend of automation and the role of advanced technologies in those challenges. We intend to have an interactive conference through these three different sessions: business talks, keynote, and parallel/presentation sessions.

Download or read book Human in the Loop Robot Control and Learning written by Luka Peternel and published by Frontiers Media SA. This book was released on 2020-01-22 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past years there has been considerable effort to move robots from industrial environments to our daily lives where they can collaborate and interact with humans to improve our life quality. One of the key challenges in this direction is to make a suitable robot control system that can adapt to humans and interactively learn from humans to facilitate the efficient and safe co-existence of the two. The applications of such robotic systems include: service robotics and physical human-robot collaboration, assistive and rehabilitation robotics, semi-autonomous cars, etc. To achieve the goal of integrating robotic systems into these applications, several important research directions must be explored. One such direction is the study of skill transfer, where a human operator’s skilled executions are used to obtain an autonomous controller. Another important direction is shared control, where a robotic controller and humans control the same body, tool, mechanism, car, etc. Shared control, in turn invokes very rich research questions such as co-adaptation between the human and the robot, where the two agents can benefit from each other’s skills or must adapt to each other’s behavior to achieve effective cooperative task executions. The aim of this Research Topic is to help bridge the gap between the state-of-the-art and above-mentioned goals through novel multidisciplinary approaches in human-in-the-loop robot control and learning.

Download or read book Biomechanical Principles on Force Generation and Control of Skeletal Muscle and their Applications in Robotic Exoskeleton written by Yuehong Yin and published by CRC Press. This book was released on 2019-09-05 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces the bionic nature of force sensing and control, the biomechanical principle on mechanism of force generation and control of skeletal muscle, and related applications in robotic exoskeleton. The book focuses on three main aspects: muscle force generation principle and biomechanical model, exoskeleton robot technology based on skeletal muscle biomechanical model, and SMA-based bionic skeletal muscle technology. This comprehensive and in-depth book presents the author's research experience and achievements of many years to readers in an effort to promote academic exchanges in this field. About the Author Yuehong Yin received his B.E. , M.S. and Ph.D. degrees from Nanjing University of Aeronautics and Astronautics, Nanjing, in 1990, 1995 and 1997, respectively, all in mechanical engineering. From December 1997 to December 1999, he was a Postdoctoral Fellow with Zhejiang University, Hangzhou, China, where he became an Associate Professor in July 1999. Since December 1999, he has been with the Robotics Institute, Shanghai Jiao Tong University, Shanghai, China, where he became a Professor and a Tenure Professor in December 2005 and January 2016, respectively. His research interests include robotics, force control, exoskeleton robot, molecular motor, artificial limb, robotic assembly, reconfigurable assembly system, and augmented reality. Dr. Yin is a fellow of the International Academy of Production Engineering (CIRP).

Download or read book Rehabilitation Robots for Neurorehabilitation in High Low and Middle Income Countries written by Michelle Jillian Johnson and published by Academic Press. This book was released on 2023-10-27 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation Robots for Neurorehabilitation in High, Low, and Middle Income Countries: Current Practice, Barriers, and Future Directions describes the state-of-art research of stroke rehabilitation using robot systems in selected High Income Countries (HICs) and Low and Middle Income Countries (LMICs), along with potential solutions that enable these technologies to be available to clinicians worldwide, regardless of country and economic status. The book brings together engineers and clinicians, offers insights into healthcare disparities, and highlights potential solutions to facilitate the availability and accessibility of more robot systems to stroke survivors and their clinicians worldwide, regardless of country and economic status.In addition, the book provides examples on how robotic technology is used to bridge rehabilitation gaps in LMICs and describes potential strategies for increasing the expansion of robot-assisted stroke rehabilitation across more LMICs. - Provides a global picture of robot-assisted neurorehabilitation - Describes stroke healthcare in selected LMICs and selected HICs, along with disparity issues - Discusses potential barriers to the penetration of rehabilitation robots into LMICs - Presents concrete examples on how clinicians and engineers have begun to address healthcare gaps with rehabilitation robotics and how to deal with accessibility barriers

Download or read book Medical and Healthcare Robotics written by Olfa Boubaker and published by Elsevier. This book was released on 2023-08-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical and Healthcare Robotics: New Paradigms and Recent Advances provides an overview and exclusive insights into current trends, the most recent innovations, and concerns in medical robotics. The book covers the major areas of medical robotics, including rehabilitation devices, artificial organs, assistive technologies, service robotics, and robotic devices for surgery, exploration, diagnosis, therapy, and training. It highlights the limitations and the importance of robotics and artificial intelligence for medical and healthcare applications. The book is a timely and comprehensive reference guide for undergraduate-level students, graduate students, and researchers in the fields of electrical engineering, mechanical engineering, mechatronics, control systems engineering, and biomedical engineering. It can be useful for master's programs, leading consultants, and industrial companies. The book can be of high interest for physicians and physiotherapists and all technical people in the medical and biomedical fields. - Covers the main areas of medical and healthcare robotics - Presents the most recent innovations and trends in medical and healthcare robotics - Contains chapters written by eminent researchers in the field

Download or read book Human Centered Solutions and Synergies across Robotic and Digital Systems for Rehabilitation written by Giacinto Barresi and published by Frontiers Media SA. This book was released on 2024-11-18 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation – the progressive restoration of lost human functions – must be effective, personalized, clinically compliant and engaging: while obtaining maximum results with minimal allocation of resources, it must be tailored to each patient’s needs, it must comply with the medical protocol, and it must engage the patient to perform the expected exercises/activities. In order to achieve such objectives, interaction technologies offer a wider range of solutions every year: more versatile, more impactful. In this context, robots and digital systems constitute groundbreaking opportunities for innovation in rehabilitation, especially through their adoption of artificial intelligence technologies. For instance, they can work as theranostic machines by means of their capability of collecting and analysing valuable data: through this, they can evaluate the rehabilitation outcome, improve diagnostic processes, and offer new insights on clinical conditions and methodologies while they guide the person in training and re-training procedures.

Download or read book Robotics in Healthcare written by João Silva Sequeira and published by Springer Nature. This book was released on 2020-02-17 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work is a collection of contributions resulting from R&D efforts originated from scientific projects involving academia, technological partners, and end-user institutions. The aim is to provide a comprehensive overview of robotics technology applied to Healthcare, and discuss the anticipation of upcoming challenges. The intersection of Robotics and Medicine includes socially and economically relevant areas, such as rehabilitation, therapy, and healthcare. Innovative usages of current robotics technologies are being somewhat stranded by concerns related to social dynamics. The examples covered in this volume show some of the potential societal benefits robotics can bring and how the robots are being integrated in social environments. Despite the aforementioned concerns, a fantastic range of possibilities is being opened. The current trend in social robotics adds to technology challenges and requires R&D to think about Robotics as an horizontal discipline, intersecting social and exact sciences. For example, robots that can act as if they have credible personalities (not necessarily similar to humans) living in social scenarios, eventually helping people. Also, robots can move inside the human body to retrieve information that otherwise is difficult to obtain. The decision autonomy of these robots raises a broad range of subjects though the immediate advantages of its use are evident. The book presents examples of robotics technologies tested in healthcare environments or realistically close to being deployed in the field and discusses the challenges involved. Chapter 1 provides a comprehensive overview of Healthcare robotics and points to realistically expectable developments in the near future. Chapter 2 describes the challenges deploying a social robot in the Pediatrics ward of an Oncological hospital for simple edutainment activities. Chapter 3 focuses on Human-Robot Interaction techniques and their role in social robotics. Chapter 4 focus on R&D efforts behind an endoscopic capsule robot. Chapter 5 addresses experiments in rehabilitation with orthotics and walker robots. These examples have deep social and economic relations with the Healthcare field, and, at the same time, are representative of the R&D efforts the robotics community is developing.

Download or read book Electromyography EMG Techniques for the Assessment and Rehabilitation of Motor Impairment Following Stroke written by Cliff S. Klein and published by Frontiers Media SA. This book was released on 2019-05-15 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ergonomics In Design written by Francisco Rebelo and Zihao Wang and published by AHFE International. This book was released on 2023-07-19 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), July 20–24, 2023, San Francisco, USA

Download or read book Exoskeletons in Rehabilitation Robotics written by Eduardo Rocon and published by Springer Science & Business Media. This book was released on 2011-01-19 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new technological advances opened widely the application field of robots. Robots are moving from the classical application scenario with structured industrial environments and tedious repetitive tasks to new application environments that require more interaction with the humans. It is in this context that the concept of Wearable Robots (WRs) has emerged. One of the most exciting and challenging aspects in the design of biomechatronics wearable robots is that the human takes a place in the design, this fact imposes several restrictions and requirements in the design of this sort of devices. The key distinctive aspect in wearable robots is their intrinsic dual cognitive and physical interaction with humans. The key role of a robot in a physical human–robot interaction (pHRI) is the generation of supplementary forces to empower and overcome human physical limits. The crucial role of a cognitive human–robot interaction (cHRI) is to make the human aware of the possibilities of the robot while allowing them to maintain control of the robot at all times. This book gives a general overview of the robotics exoskeletons and introduces the reader to this robotic field. Moreover, it describes the development of an upper limb exoskeleton for tremor suppression in order to illustrate the influence of a specific application in the designs decisions.