Download or read book Design and Manufacture of Composite Structures written by G C Eckold and published by Elsevier. This book was released on 1994-01-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical book of value to those in the automotive, chemical, aerospace and offshore industries. Case studies are included and as well as covering flexible manufacturing systems and non-destructive evaluation, the author looks ahead to metal matrix composites and ceramic matrix composites.

Download or read book Composite Structures written by Manoj Kumar Buragohain and published by CRC Press. This book was released on 2017-08-15 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this book is to bridge this gap by presenting the concepts in composites in an integrated and balanced manner and expose the reader to the total gamut of activities involved in composite product development. It includes the complete know-how for development of a composite product including its design & analysis, manufacture and characterization, and testing.The book has fourteen chapters that are divided into two parts with part one describing mechanics, analytical methods in composites and basic finite element procedure, and the second part illustratesr materials, manufacturing methods, destructive and non-destructive tests and design.

Download or read book Design and Manufacture of Fibre Reinforced Composites written by Wayne Hall and published by Springer Nature. This book was released on 2021-08-05 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the design and manufacture of fibre-reinforced composites. The mechanical properties of unidirectional composites are considered in a structural design context. The use of woven and random fibres is also addressed. The accuracy of design estimates for unidirectional composites is benchmarked against test data, and the relevance of a factor of safety (FoS) is established. The importance of prototype testing is emphasised. This book illustrates how to make a fibre-reinforced composite. Wet layup, vacuum bagging and prepreg moulding are covered in detail. Some guidance on mould design and construction is also provided. Finally, an introduction to the manufacture of composite tubes is presented. Wherever possible, design and make examples are used to illustrate the content. Tutorial questions and problems are included at the end of each chapter. The reader is encouraged to use these questions and problems to assess their own level of understanding of the content.

Download or read book Design and Manufacture of Textile Composites written by A C Long and published by CRC Press. This book was released on 2006-01-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.

Download or read book Design and Analysis of Composite Structures written by Christos Kassapoglou and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Composite Structures enables graduate students and engineers to generate meaningful and robust designs of complex composite structures. Combining analysis and design methods for structural components, the book begins with simple topics such as skins and stiffeners and progresses through to entire components of fuselages and wings. Starting with basic mathematical derivation followed by simplifications used in real-world design, Design and Analysis of Composite Structures presents the level of accuracy and range of applicability of each method. Examples taken from actual applications are worked out in detail to show how the concepts are applied, solving the same design problem with different methods based on different drivers (e.g. cost or weight) to show how the final configuration changes as the requirements and approach change. Provides a toolkit of analysis and design methods to most situations encountered in practice, as well as analytical frameworks and the means to solving them for tackling less frequent problems. Presents solutions applicable to optimization schemes without having to run finite element models at each iteration, speeding up the design process and allowing examination of several more alternatives than traditional approaches. Includes guidelines showing how decisions based on manufacturing considerations affect weight and how weight optimization may adversely affect the cost. Accompanied by a website at www.wiley.com/go/kassapoglou hosting lecture slides and solutions to the exercises for instructors.

Download or read book Lightweight Composite Structures in Transport written by James Njuguna and published by Woodhead Publishing. This book was released on 2016-01-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight Composite Structures in Transport: Design, Manufacturing, Analysis and Performance provides a detailed review of lightweight composite materials and structures and discusses their use in the transport industry, specifically surface and air transport. The book covers materials selection, the properties and performance of materials, and structures, design solutions, and manufacturing techniques. A broad range of different material classes is reviewed with emphasis on advanced materials. Chapters in the first two parts of the book consider the lightweight philosophy and current developments in manufacturing techniques for lightweight composite structures in the transport industry, with subsequent chapters in parts three to five discussing structural optimization and analysis, properties, and performance of lightweight composite structures, durability, damage tolerance and structural integrity. Final chapters present case studies on lightweight composite design for transport structures. - Comprehensively covers materials selection, design solutions, manufacturing techniques, structural analysis, and performance of lightweight composite structures in the transport industry - Includes commentary from leading industrial and academic experts in the field who present cutting-edge research on advanced lightweight materials for the transport industry - Includes case studies on lightweight composite design for transport structures

Download or read book Polymer Composites in the Aerospace Industry written by P. E. Irving and published by Elsevier. This book was released on 2014-09-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are increasingly used in aerospace applications due to properties such as strength and durability compared to weight. Edited by two leading authorities in the field, this book summarises key recent research on design, manufacture and performance of composite components for aerospace structures. Part one reviews the design and manufacture of different types of composite component. Part two discusses aspects of performance such as stiffness, strength, fatigue, impact and blast behaviour, response to temperature and humidity as well as non-destructive testing and monitoring techniques.

Download or read book Design and Manufacture of Structural Composites written by Lee Harper and published by Woodhead Publishing. This book was released on 2022-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the structure, forming a very close link between the constituents, the manufacturing process and the resulting mechanical performance. This book takes an in-depth look at material choices and the intermediate steps required to convert different fibre and matrix combinations into finished products. It provides an insight into recent developments for each of the manufacturing processes covered, addressing design, cost, rate and mechanical performance. Topics covered include an introduction to composite materials, material preforming and conversion, moulding, digital design and sustainability, which addresses waste reduction, disassembly and fibre recovery. This book has been developed primarily as a teaching resource with contributions from leading experts in the field. The content has evolved from courses given by the authors to mechanical engineering and materials science students, at both undergraduate and postgraduate levels. It also draws upon experience gained during research projects and from leading industry experts. It therefore provides non-specialists with a valuable introduction to composite manufacturing techniques, helping to determine the most suitable manufacturing routes and to understand the challenges associated with the production of high-performance composite components. - Provides an overview of the most common manufacturing routes for fibre reinforced composites, including the influence of the manufacturing route on mechanical properties, production volume and component cost - Discusses recent advances in composite manufacturing, including the use of automation, process simulation, digital factories, and solutions to improve sustainability - Looks at where the composites sector is heading and discusses some of the challenges faced by end-users looking to scale up production and increase the uptake of fibre-reinforced composites for structural applications

Download or read book Composite Materials for Aircraft Structures written by Alan A. Baker and published by AIAA. This book was released on 2004 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Axiomatic Design and Fabrication of Composite Structures written by Dai Gil Lee and published by Oxford University Press. This book was released on 2006 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea that materials can be designed to satisfy specific performance requirements is relatively new. With high-performance composites, however, the entire process of designing and fabricating a part can be worked out before manufacturing. The purpose of this book is to present an integrated approach to the design and manufacturing of products from advanced composites. It shows how the basic behavior of composites and their constitutive relationships can be used during the design stage, which minimizes the complexity of manufacturing composite parts and reduces the repetitive "design-build-test" cycle. Designing it right the first time is going to determine the competitiveness of a company, the reliability of the part, the robustness of fabrication processes, and ultimately, the cost and development time of composite parts. Most of all, it should expand the use of advanced composite parts in fields that use composites only to a limited extent at this time. To achieve these goals, this book presents the design and fabrication of novel composite parts made for machine tools and other applications like robots and automobiles.This book is suitable as a textbook for graduate courses in the design and fabrication of composites. It will also be of interest to practicing engineers learning about composites and axiomatic design.A CD-ROM is included in every copy of the book, containing Axiomatic CLPT software. This program, developed by the authors, will assist readers in calculating material properties from the microstructure of the composite.This book is part of the Oxford Series on Advanced Manufacturing.

Download or read book High Performance Composite Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2021-12-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advanced 3D printing processes and the latest developments in novel composite-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The rise in ecological anxieties has forced scientists and researchers from all over the world to find novel lightweight materials. Therefore, it is necessary to expand knowledge about the processing, applications, and challenges of 3D printing of composite materials to expanding the range of their application. This book presents an extensive survey on recent improvements in the research and development of additive manufacturing technologies that are used to make composite structures for various applications such as electronic, aerospace, construction, and biomedical applications. Advanced printing techniques including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting will be covered and discussed thoroughly in this book. This book also focuses the recent advances and challenges in polymer nanocomposite and introduces potential applications of these materials in various sectors.

Download or read book Polymer Based Composites written by V. Arumugaprabu and published by CRC Press. This book was released on 2021-08-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of composite materials over conventional materials has been a continual trend for over a decade. While the fundamental understanding of fiber reinforcement has not changed, many new material advancements have occurred, especially in manufacturing methods, and there is an ever-growing number of composite material applications across various industries. Polymer-Based Composites: Design, Manufacturing, and Applications presents the concepts and methods involved in the development of various fiber-reinforced composite materials. Features: Offers a comprehensive view of materials, mechanics, processing, design, and applications Bridges the gap between research, manufacturing science, and analysis and design Discusses composite materials composed of continuous synthetic fibers and matrices for use in engineering structures Presents codes and standards related to fiber-reinforced polymer composites Includes case studies and examples based on industrial, automotive, aerospace, and household applications This book is a valuable resource for advanced students, researchers, and industry personnel to understand recent advances in the field and achieve practical results in the development, manufacture, and application of advanced composite materials.

Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit

Download or read book Tooling for Composite Aerospace Structures written by Zeaid Hasan and published by Butterworth-Heinemann. This book was released on 2020-06-19 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tooling for Composite Aerospace Structures: Manufacturing and Applications offers a comprehensive discussion on the design, analysis, manufacturing and operation of tooling that is used in the lamination of composite materials and assembly. Chapters cover general topics, the materials that are typically used for tooling, design aspects and recommendations on how to approach the design, and what engineers need to consider, including examples of designs and their pros and cons, how to perform these type of details, and the methods of inspection needed to ensure quality control. The book concludes with an outlook on the industry and the future.

Download or read book Marine Composites written by Richard Pemberton and published by Woodhead Publishing. This book was released on 2018-08-20 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Composites: Design and Performance presents up-to-date information and recent research findings on the application and use of advanced fibre-reinforced composites in the marine environment. Following the success of their previously published title: Marine Applications of Advanced Fibre-reinforced Composites which was published in 2015; this exemplary new book provides comprehensive information on materials selection, characterization, and performance. There are also dedicated sections on sandwich structures, manufacture, advanced concepts, naval architecture and design considerations, and various applications. The book will be an essential reference resource for designers, materials engineers, manufactures, marine scientists, mechanical engineers, civil engineers, coastal engineers, boat manufacturers, offshore platform and marine renewable design engineers. - Presents a unique, high-level reference on composite materials and their application and use in marine structures - Provides comprehensive coverage on all aspects of marine composites, including the latest advances in damage modelling and assessment of performance - Contains contributions from leading experts in the field, from both industry and academia - Covers a broad range of naval, offshore and marine structures

Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.

Download or read book Sustainable Composites for Lightweight Applications written by Hom Nath Dhakal and published by Woodhead Publishing. This book was released on 2020-11-22 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon and glass fibre reinforced composite materials have been used for many years in several different types of applications. However, these conventional composites are derived from non-renewable reinforcements and they pose a significant threat to the environment. Government legislation and consumer behaviour have recently forced many industries to adapt sustainable composites. Industries such as automotive, marine and aerospace are now seeking sustainable lightweight composites with the aim to reduce the overall weight of the components with enhanced materials and design aspects. Therefore, there is high demand on research for the development of sustainable lightweight composites. This book presents a comprehensive review of lightweight composites with the central aim to increase their use in key industrial sectors such as automotive, marine and aerospace. There is no such book currently available that is dedicated to sustainable lightweight applications covering important topics such as key drivers for lightweight composites, mechanical properties, damage characterisation, durability and environmental aspects. Key topics that are addressed include: - The roles of reinforcements and matrices in composite materials - Sustainable natural fibre reinforcements and their morphological structures - Lightweight applications and properties requirements - Design, manufacturing processes and their effects on properties - Testing and damage characterisation of composite materials - Sustainable composites and techniques for property enhancement - Future trends and challenges for sustainable composites in lightweight applications It will be a valuable reference resource for those working in material Science, polymer science, materials engineering, and industries involved in the manufacture of automotive and aerospace components from lightweight composite materials. - Provides a comprehensive review of sustainable lightweight composites looking at key industrial applications such as automotive, marine, and aerospace and construction - Important relationships between structure and properties are analysed in detail - Enhancement of properties through hybrid systems, are also explored with emphasis on design, materials selection and manufacturing techniques