Download or read book Design and Fabrication of Equal Channel Angular Extrusion Process Analysis for Non Ferrous Materials written by Perumalla Janaki Ramulu and published by Anchor Academic Publishing. This book was released on 2017 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Equal Channel Angular Extrusion” (ECAE) is a significant method in industrial forming applications, which is the most important method for the production of ultrafine grained bulk samples, where plastic strains are introduced into the bulk material without any changes in the cross section. ECAE has different die channel angles from which an optimum die channel angle should be identified so that efficient mechanical properties will be obtained. This study is focused on the plastic deformation behavior of Al alloys by modeling ECAE with experimental and finite element software. A solid model was generated using CATIA. The STL files of ECAE die generated in CATIA were used in DEFORM-3D for simulations. The experiments are performed by designing the ECAE tools such as die, punch and billet. A series of numerical experiments were carried out for the die angles of 115°, 125°and 135° and outer corner angle of 6°, using a billet diameter of 9mm and a height of 70mm. A detailed analysis of the strains introduced by ECAP (“Equal Channel Angular Pressing”) in a single passage through the die is noted. The experiments are conducted by attaching the ECAE tools to the Universal Testing Machine on aluminum alloy. The dimensions are followed for ECAE by taking considerations from the existing literature into account. On the basis of the experiment and simulation results, load, displacement, and punch force are evaluated and compared with each other.

Download or read book Light Metals 2021 written by Linus Perander and published by Springer Nature. This book was released on 2021-02-23 with total page 1049 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2021 collection includes contributions from the following symposia: · Alumina and Bauxite · Aluminum Alloys, Processing, and Characterization · Aluminum Reduction Technology · Aluminum Reduction Technology Across the Decades: An LMD Symposium Honoring Alton T. Tabereaux, Halvor Kvande and Harald A. Øye · Cast Shop Technology · Electrode Technology for Aluminum Production

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.

Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties.One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying.With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.

Download or read book Additive Friction Stir Deposition written by Hang Z. Yu and published by Elsevier. This book was released on 2022-07-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition. - Provides a clear process description of additive friction stir deposition and highlights key capabilities - Summarizes the current research and application of additive friction stir deposition, including material flow, microstructure evolution, repair and dissimilar material cladding - Discusses future applications and areas of research for this technology

Download or read book Micromanufacturing of Metallic Materials written by Jingwei Zhao and published by MDPI. This book was released on 2021-01-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product miniaturization is a trend for facilitating product usage, enabling product functions to be implemented in microscale geometries, and aimed at reducing product weight, volume, cost and pollution. Driven by ongoing miniaturization in diverse areas, including medical devices, precision equipment, communication devices, micro-electromechanical systems and microsystems technology, the demands for micro metallic products have been tremendously increased. Such a trend requires the development of advanced technology for the micromanufacturing of metallic materials, with regard to producing high-quality micro metallic products that possess excellent dimensional tolerances, the required mechanical properties and improved surface quality. Micromanufacturing differs from conventional manufacturing technology in terms of materials, processes, tools, and machines and equipment, due to the miniaturization nature of the whole micromanufacturing system, which challenges the rapid development of micromanufacturing technology. Such a background has prompted and encouraged us to publish a scholarly book on the topic of the micromanufacturing of metallic materials, with the purpose of providing readers with a valuable document that can be used in the research and development of micromanufacturing technology. This book will be useful for both theoretical and applied research aimed at micromanufacturing technology, and will serve as an important research tool, providing knowledge to be returned to the community not only as valuable scientific literature, but also as technology, processes and productivities.

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Physics of Strength and Plasticity written by Ali S. Argon and published by Mit Press. This book was released on 2003-02-01 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The title of this book is derived from a graduate course in which Professor Egon Orowan presented to M.I.T. students a clear and simple picture of the basic concepts in crystal plasticity and the mechanics of fracture of materials. Since the publication of his pioneering papers on dislocations and atomic mechanisms of fracture in the early 1930's,Professor Orowan has been one of the principal contributors to the field of physics of plasticity and strength. During the past 10 to 15 years, the perfection of many direct experimental methods has caused a great increase of activity in the elucidation of the effects of dislocations on mechanical and physical properties. Equally intensive activity is taking place in the field of physics and mechanics of fracture processes. Professor Ali Argon felt that the retirement of Professor Orowan from the M.I.T. faculty was an appropriate occasion to take stock of the developments in the immediate past and to produce a needed synthesis of this technologically important field. For this purpose he invited 37 of the world's leading figures in the field to contribute theoretical papers of original work. The 17 papers on the Physics of Plasticity fall into two categories: (1) Individual Dislocations and Basic Deformation Mechanisms, and (2) Hardening Mechanisms and Dislocation Dynamics. The 10 papers on the Physics of Strength concentrate on (1) Cracks and Fracture, and (2) Geology.

Download or read book Metallurgical Effects at High Strain Rates written by R. Rohde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A conference on Metallurgical Effects at High Strain Rates was held at Albuquerque, New Mexico, February 5 through 8, 1973, under joint sponsorship of Sandia Laboratories and the Physical Metallurgy Committee of The Metallurgical Society of AIME. This book presents the written proceedings of the meeting. The purpose of the conference was to gather scientists from diverse disciplines and stimulate interdisciplinary discussions on key areas of materials response at high strain rates. In this spirit, it was similar to one of the first highly successful con ferences on this subject held in 1960, in Estes Park, Colorado, on The Response of Metals to High Velocity Deformation. The 1973 conference was able to demonstrate rather directly the increased understanding of high strain rate effects in metals that has evolved over a period of roughly 12 years. In keeping with the interdisciplinary nature of the meeting, the first day was devoted to a tutorial session of invited papers to provide attendees of diverse backgrounds with a common basis of understanding. Sessions were then held with themes centered around key areas of the high strain rate behavior of metals.

Download or read book Hydrostatic Extrusion written by N. Inoue and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be a reference text on hydrostatic extru sion, a multidisciplinary technology involving the forming process of materials, tribology, high pressure engineering and so forth. Until now only one book bearing the title of hydrostatic extrusion, by Prof. Alexander and Dr. Lengyel, has been published since 1971. Although there are chapters on hydrostatic extrusion in such books as THE MECHANICAL BEHAVIOUR OF MATERIALS UNDER PRESSURE edited by Dr. Pugh, METAL FORMING by Prof. Avitzur and HIGH PRESSURE TECHNOLOGY by Drs. Spain and Paauwe, it is regrettable that no up~to-date reference books on hydro static extrusion are available. As is well known, hydrostatic extrusion is a nearly-ideal lubricated extrusion. Its advantages have been demonstrated by laboratory research in the past two decades, yet many manufacturers, however, still hesitate to adopt the technology in their plants. Their hesitation is certainly due to the lack of exact information on the process and its equipment and also to 'their unfamiliarity with the actual method of operation. In order to provide a useful introduction to the subject for engi neers who work in industries which plan to employ this technique and also to give exact and reliable information on the durability and perfo- ance of production facilities, as well as the capabilities of the process and the properties of extruded products, we decided to publish this book. Starting with theories and computational methods, the processes of cold, warm and hot hydrostatic extrusion are described by experts in their respective fields.

Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology

Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.

Download or read book Manufacturing Processes written by H. N. Gupta and published by New Age International. This book was released on 2012-09 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective from 2008-09 session, U.P.T.U. has introduced the subject of manufacturing processes for first year engineering students of all streams. This textbook covers the entire course material in a distilled form.

Download or read book Fabrication and Welding Engineering written by Roger Timings and published by Routledge. This book was released on 2008 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers basic sheet-metal fabrication and welding engineering principles and applications. This title includes chapters on non-technical but essential subjects such as health and safety, personal development and communication of technical information. It contains illustrations that demonstrate the practical application of the procedures described.

Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental