Download or read book Design and Fabrication of a High temperature High vacuum Furnace to Heat Treat Niobium for Superconducting Radio Frequency Cavities written by Saravan Kumar Chandrasekaran and published by . This book was released on 2010 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book Superconducting Technology written by Kristian Fossheim and published by World Scientific. This book was released on 1991 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an interdisciplinary selection of timely articles which cover a wide range of superconducting technologies ranging from high tech medicine (10-12 Gauss) to multipurpose sensors, microwaves, radio engineering, magnet technology for accelerators, magnetic energy storage, and power transmission on the 109 watt scale. It is aimed primarily at the non-specialist and will be suitable as an introductory course book for those in the relevant fields and related industries. As shown in the title several examples of high-c applications are included. While low-Tc is still the leading technology, for instance, in cables and SQUIDS, case studies in these areas are presented.
Download or read book RF Linear Accelerators written by Thomas P. Wangler and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses einschlägige Lehrbuch, entwickelt auf der Grundlage der Ausbildung an der US Particle Accelerator School, schließt eine Lücke in der verfügbaren Literatur zum Thema Hochfrequenz-Linearbeschleuniger, kurz RF-Linac. Nach einer Erläuterung der naturwissenschaftlichen Grundlagen und der neuesten technologischen Eckdaten stellt diese zweite Auflage neueste RF-Linacs, spezialisierte Systeme, Systeme mit Supraleitern und verschiedene Spezialverfahren vor. Übungsaufgaben an den Kapitelenden erleichtern das Einprägen und das Nacharbeiten von Vorlesungen.
Download or read book The Impact of Selling the Federal Helium Reserve written by National Research Council and published by National Academies Press. This book was released on 2000-06-18 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Helium Privatization Act of 1996 (P.L. 104-273) directs the Department of the Interior to begin liquidating the U.S. Federal Helium Reserve by 2005 in a manner consistent with "minimum market disruption" and at a price given by a formula specified in the act. It also mandates that the Department of the Interior "enter into appropriate arrangements with the National Academy of Sciences to study and report on whether such disposal of helium reserves will have a substantial adverse effect on U.S. scientific, technical, biomedical, or national security interests." This report is the product of that mandate. To provide context, the committee has examined the helium market and the helium industry as a whole to determine how helium users would be affected under various scenarios for selling the reserve within the act's constraints. The Federal Helium Reserve, the Bush Dome reservoir, and the Cliffside facility are mentioned throughout this report. It is important to recognize that they are distinct entities. The Federal Helium Reserve is federally owned crude helium gas that currently resides in the Bush Dome reservoir. The Cliffside facility includes the storage facility on the Bush Dome reservoir and the associated buildings pipeline.
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology
Download or read book Superconducting Accelerator Magnets written by K.-H. Mess and published by World Scientific. This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.
Download or read book Low Temperature Materials and Mechanisms written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2016-08-19 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the growing interest in low temperature technologies. Since the subject of low temperature materials and mechanisms is multidisciplinary, the chapters reflect the broadest possible perspective of the field. Leading experts in the specific subject area address the various related science and engineering chemistry, material science, electrical engineering, mechanical engineering, metallurgy, and physics.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book XAFS Techniques for Catalysts Nanomaterials and Surfaces written by Yasuhiro Iwasawa and published by Springer. This book was released on 2016-10-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive, theoretical, practical, and thorough guide to XAFS spectroscopy. The book addresses XAFS fundamentals such as experiments, theory and data analysis, advanced XAFS methods such as operando XAFS, time-resolved XAFS, spatially resolved XAFS, total-reflection XAFS, high energy resolution XAFS, and practical applications to a variety of catalysts, nanomaterials and surfaces. This book is accessible to a broad audience in academia and industry, and will be a useful guide for researchers entering the subject and graduate students in a wide variety of disciplines.
Download or read book Technology of Liquid Helium written by Richard H. Kropschot and published by . This book was released on 1968 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Sensitivity Magnetometers written by Asaf Grosz and published by Springer. This book was released on 2016-09-20 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers, for the first time, an overview of nearly all of the magnetic sensors that exist today. The book is offering the readers a thorough and comprehensive knowledge from basics to state-of-the-art and is therefore suitable for both beginners and experts. From the more common and popular AMR magnetometers and up to the recently developed NV center magnetometers, each chapter is describing a specific type of sensor and providing all the information that is necessary to understand the magnetometer behavior including theoretical background, noise model, materials, electronics, design and fabrication techniques, etc.
Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardest requirements on a material are in general imposed at the surface: it has to be wear resistant for tools and bearings; corrosion resistant for turbine blades; antireflecting for solar cells; and it must combine several of these properties in other applications. `Surface engineering' is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both the more traditional methods, such as nitriding, boriding and carburizing, and the newer ones, such as ion implantation, laser beam melting and, in particular, coating. This book comprises and compares in a unique way all these techniques of surface engineering. It is a compilation of lectures which were held by renowned scientists and engineers in the frame of the well known `EuroCourses' of the Joint Research Centre of the Commission of the European Communities. The book is principally addressed to material and surface scientists, physicists and chemists, engineers and technicians of industries and institutes where surface engineering problems arise.
Download or read book Superconductivity written by R.G. Sharma and published by Springer. This book was released on 2015-02-26 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and applications of superconducting magnets. It explains the phenomenon of superconductivity, theories of superconductivity, type II superconductors and high-temperature cuprate superconductors. The main focus of the book is on the application to superconducting magnets to accelerators and fusion reactors and other applications of superconducting magnets. The thermal and electromagnetic stability criteria of the conductors and the present status of the fabrication techniques for future magnet applications are addressed. The book is based on the long experience of the author in studying superconducting materials, building magnets and numerous lectures delivered to scholars. A researcher and graduate student will enjoy reading the book to learn various aspects of magnet applications of superconductivity. The book provides the knowledge in the field of applied superconductivity in a comprehensive way.
Download or read book Ultrahigh Vacuum Practice written by G. F. Weston and published by Elsevier. This book was released on 2013-10-22 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrahigh Vacuum Practice covers topics about components suitable for ultrahigh vacuum applications, their theory of operation, their assembly and use, and their performance and calibration. The book starts by discussing the fundamentals of vacuum science and technology. The text then describes the physical properties and methods of preparing the materials for ultrahigh vacuum and the various pumps and their performance and application to ultrahigh vacuum systems. The mechanism and performance of the various ultrahigh vacuum gauges and the problem of gauge calibration at low pressures, as well as the accuracy that can be expected are discussed as well. Partial pressure measurements, ultrahigh vacuum components, and liquid nitrogen replenisher are also considered. The book tackles the system requirements and applications, as well as methods for detecting leak. Users or potential users of ultrahigh vacuum equipment and expert vacuum engineers will find the book useful.
