Download or read book DESIGN AND EVALUATION OF DIMETHYL CARBONATE PRODUCTION FROM CARBON DIOXIDE written by Pichayapan Kongpanna and published by . This book was released on 2015 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic computer-aided framework for sustainable process design is presented. The framework integrated with various methods, tools, algorithms and databases is based on a combined process synthesis-design-intensification method. The synthesis-stage involves superstructure based optimization to identify promising networks. The design-stage involves selection and analysis of the identified networks as a base case design in terms of operational feasibility, economics, life cycle assessment factors and sustainability measures, which are employed to establish targets for improvement in the next-stage. The innovation-stage involves generation and screening of the more sustainable alternatives through a phenomena-based process intensification method. The proposed framework was applied to the CO2-based DMC production process. A superstructure of processing routes including CO2 direct synthesis and indirect syntheses via urea, ethylene carbonate and propylene carbonate, was generated and evaluated to determine the most promising processing route, which was then analyzed in detail to identify design improvement targets. Through a phenomena-based method, new more sustainable process alternatives matching the design improvement targets were identified. For the evaluation of alternatives, the measures include sustainability metrics, economic potential indicators as well as LCA factors. The urea route with reactive distillation was found to be the best alternative, offering superior performance to the conventional BAYER process.

Download or read book Dimethyl Carbonate Production Process Cost Analysis DMC E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Dimethyl Carbonate (DMC) production from methanol The process examined is a typical oxidative carbonylation process. This process is a non-phosgene alternative for DMC production, in which CO, O2 and methanol react in the presence of copper chloride (CuCI) catalyst. Although reaction occurs in the liquid phase, a heterogeneous-phase mixture forms and the product stream is withdrawn from the reactor in vapor phase. The vapor is partially condensed, treated for recovery of catalyst and then subjected to distillation operations. Unreacted methanol is recovered and recycled to the reactor. Purified Dimethyl Carbonate is obtained after separation of side-product water. This report was developed based essentially on the following reference(s): (1) US Patent 20030236428, issued to General Electric Company (2) US Patent 5685957, issued to Enichem Synthesis in 1997 Keywords: Non-Phosgene Process, Phosgene-Free, Oxidative Carbonylation, Enichem, Eni

Download or read book Dimethyl Carbonate Production from Ethylene Carbonate Cost Analysis DMC E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Dimethyl Carbonate (DMC) production from ethylene carbonate and methanol. The process examined is a typical transesterification process. In this process, ethylene carbonate and methanol are converted into dimethyl carbonate (DMC) and ethylene glycol in a reactive distillation column and purified DMC is obtained through an extractive distillation. Monoethylene glycol is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Transesteification, ethylene arbonate, DMC, methanol, MEG

Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.

Download or read book DFT Study of the Mechanism of Dimethyl Carbonate Formation from CO2 and CH3OH with Me2Sn OMe 2 Anglais written by Mahboubeh Poor Kalhor and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon dioxide occupies a special place in the amplification of the anthropogenic greenhouse effect. In particular, its use in the synthesis of organic carbonates from alcohols, constitute an alternative to the current application of phosgene or carbon monoxide. The insertion of CO2 into the Sn-OCH3 bond of dialkyldimethoxystannanes is recognized as the first step to dimethyl carbonate (DMC) formation from methanol and carbon dioxide. The identification of the subsequent steps is crucial for activity improvements and is still under debate as the tin species have the propensity for oligomerization. We have used density functional theory calculations to provide insight into the reaction mechanism. The CO2 insertion into the Sn-OCH3 bond is promoted by the concerted Lewis acid-base interaction of CO2 with tin and the oxygen atom of the methoxy ligand. The major reaction pathway to DMC is proposed to occur via an intramolecular rearrangement of the monomeric species, Me2Sn[OC(O)OCH3]2. The process results in the transfer of a methyl group from one methyl carbonate to the other via a 4-membered or 6-membered ring forming the Sn-CO3 moiety. In a second stage, methanol reacts with one intermediate and leads to DMC formation and a trimer compound which may allow the regeneration of the reactant. Also a decanuclear tin complex is produced due to the lateral reaction. Finally a catalytic cycle for DMC production in methanol can be elaborated. DFT calculations are in agreement with the experimental data and allow a comparative analysis of reaction channels.

Download or read book Carbon Dioxide Recovery and Utilization written by M. Aresta and published by Springer Science & Business Media. This book was released on 2003-08-31 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Dioxide Recovery and Utilization is a complete and informative resource on the carbon dioxide sources and market at the European Union level, with reference to the world situation. The book covers the following themes: - Sources of carbon dioxide and their purity, - Market of carbon dioxide and its uses, - Separation techniques of carbon dioxide from flue gases, - Analysis of the potential of each technique and application, - Basic science and technology of supercritical CO2, - Reactions in supercritical CO2 and its use as reactive solvent, - Utilization of CO2 in the synthesis of chemicals with low energy input, - Conversion of CO2 into fuels: existing techniques, - Dry reforming of methane, - Assessment of the use of carbon dioxide for the synthesis of methanol. This book is unique in providing integrated information and a perspective on innovative technologies for the use of carbon dioxide. The book is suitable for use as a textbook for courses in chemical engineering and chemistry. It is also of great interest as a general reference for those involved with technologies for avoiding carbon dioxide production and for economists. This is an invaluable reference for specialists on synthetic chemistry, gas separation, supercritical fluids, carbon dioxide marketing, renewable energy and sustainable development. In addition, it will be useful for those working in the chemical industry and for policy makers for carbon dioxide mitigation, innovative technologies, carbon recycling, and power generation.

Download or read book Chemistry Beyond Chlorine written by Pietro Tundo and published by Springer. This book was released on 2016-09-17 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the industrial revolution, chlorine remains an iconic molecule even though its production by the electrolysis of sodium chloride is extremely energy intensive. The rationale behind this book is to present useful and industrially relevant examples for alternatives to chlorine in synthesis. This multi-authored volume presents numerous contributions from an international spectrum of authors that demonstrate how to facilitate the development of industrially relevant and implementable breakthrough technologies. This volume will interest individuals working in organic synthesis in industry and academia who are working in Green Chemistry and Sustainable Technologies.

Download or read book Carbon Dioxide Utilization for Global Sustainability written by Sang-Eon Park and published by Elsevier. This book was released on 2004-10-27 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing global environmental problems, such as global warming is essential to global sustainability. Continued research leads to advancement in standard methods and produces new data. Carbon Dioxide Utilization for Global Sustainability: Proceedings of the 7th ICCDU (International Conference on Carbon Dioxide Utilization) reflects the most recent research results, as well as stimulating scientific discussions with new challenges in advancing the development of carbon dioxide utilization. Drawing on a wealth of information, this well structured book will benefit students, researchers and consultants looking to catch up on current developments in environmental and chemical engineering. * Provides comprehensive data on CO2 utilisation* Contains up-to-date information, including recent research trends* Is written for students, researchers and consultants in environmental and chemical engineering

Download or read book Gaseous Carbon Waste Streams Utilization written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-02-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the quest to mitigate the buildup of greenhouse gases in Earth's atmosphere, researchers and policymakers have increasingly turned their attention to techniques for capturing greenhouse gases such as carbon dioxide and methane, either from the locations where they are emitted or directly from the atmosphere. Once captured, these gases can be stored or put to use. While both carbon storage and carbon utilization have costs, utilization offers the opportunity to recover some of the cost and even generate economic value. While current carbon utilization projects operate at a relatively small scale, some estimates suggest the market for waste carbon-derived products could grow to hundreds of billions of dollars within a few decades, utilizing several thousand teragrams of waste carbon gases per year. Gaseous Carbon Waste Streams Utilization: Status and Research Needs assesses research and development needs relevant to understanding and improving the commercial viability of waste carbon utilization technologies and defines a research agenda to address key challenges. The report is intended to help inform decision making surrounding the development and deployment of waste carbon utilization technologies under a variety of circumstances, whether motivated by a goal to improve processes for making carbon-based products, to generate revenue, or to achieve environmental goals.

Download or read book Catalytic Synthesis of Dimethyl Carbonate from Carbon Dioxide and Methanol written by Valerie Ayamba Eta and published by . This book was released on 2011 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 34th European Symposium on Computer Aided Process Engineering 15th International Symposium on Process Systems Engineering written by Flavio Manenti and published by Elsevier. This book was released on 2024-06-28 with total page 3634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering, contains the papers presented at the 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering joint event. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. Presents findings and discussions from the 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering joint event

Download or read book Applications in Design and Simulation of Sustainable Chemical Processes written by Alexandre C. Dimian and published by Elsevier. This book was released on 2019-08-08 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications in Design and Simulation of Sustainable Chemical Processes addresses the challenging applications in designing eco-friendly but efficient chemical processes, including recent advances in chemistry and catalysis that rely on renewable raw materials. Grounded in the fundamental knowledge of chemistry, thermodynamics, chemical reaction engineering and unit operations, this book is an indispensable resource for developing and designing innovating chemical processes by employing computer simulations as an efficient conceptual tool. Targeted to graduate and post graduate students in chemical engineering, as well as to professionals, the book aims to advance their skills in process innovation and conceptual design. The work completes the book Integrated Design and Simulation of Chemical Processes by Elsevier (2014) authored by the same team. Includes comprehensive case studies of innovative processes based on renewable raw materials Outlines Process Systems Engineering approach with emphasis on systematic design methods Employs steady-state and dynamic process simulation as problem analysis and flowsheet creation tool Applies modern concepts, as process integration and intensification, for enhancing the sustainability

Download or read book Sustainable Industrial Chemistry written by Fabrizio Cavani and published by John Wiley & Sons. This book was released on 2009-09-22 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the need for sustainable process design and alternative reaction routes to reduce industry?s impact on the environment has gained vital importance. The book begins with a general overview of new trends in designing industrial chemical processes which are environmentally friendly and economically feasible. Specific examples written by experts from industry cover the possibilities of running industrial chemical processes in a sustainable manner and provide an up-to-date insight into the main concerns, e.g., the use of renewable raw materials, the use of alternative energy sources in chemical processes, the design of intrinsically safe processes, microreactor and integrated reaction/ separation technologies, process intensification, waste reduction, new catalytic routes and/or solvent and process optimization.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Principles and Case Studies of Simultaneous Design written by William L. Luyben and published by John Wiley & Sons. This book was released on 2012-02-08 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many comprehensive design books, but none of them provide a significant number of detailed economic design examples of typically complex industrial processes. Most of the current design books cover a wide variety of topics associated with process design. In addition to discussing flowsheet development and equipment design, these textbooks go into a lot of detail on engineering economics and other many peripheral subjects such as written and oral skills, ethics, "green" engineering and product design. This book presents general process design principles in a concise readable form that can be easily comprehended by students and engineers when developing effective flow sheet and control structures. Ten detailed case studies presented illustrate an in-depth and quantitative way the application of these general principles. Detailed economic steady-state designs are developed that satisfy economic criterion such as minimize total annual cost of both capital and energy or return on incremental capital investment. Complete detailed flow sheets and Aspen Plus files are provided. Then conventional PI control structures are be developed and tested for their ability to maintain product quality during disturbances. Complete Aspen Dynamics files are be provided of the dynamic simulations.

Download or read book 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2015-07-14 with total page 2667 pages. Available in PDF, EPUB and Kindle. Book excerpt: 25th European Symposium on Computer-Aided Process Engineering contains the papers presented at the 12th Process Systems Engineering (PSE) and 25th European Society of Computer Aided Process Engineering (ESCAPE) Joint Event held in Copenhagen, Denmark, 31 May - 4 June 2015. The purpose of these series is to bring together the international community of researchers and engineers who are interested in computing-based methods in process engineering. This conference highlights the contributions of the PSE/CAPE community towards the sustainability of modern society. Contributors from academia and industry establish the core products of PSE/CAPE, define the new and changing scope of our results, and future challenges. Plenary and keynote lectures discuss real-world challenges (globalization, energy, environment, and health) and contribute to discussions on the widening scope of PSE/CAPE versus the consolidation of the core topics of PSE/CAPE. Highlights how the Process Systems Engineering/Computer-Aided Process Engineering community contributes to the sustainability of modern society Presents findings and discussions from both the 12th Process Systems Engineering (PSE) and 25th European Society of Computer-Aided Process Engineering (ESCAPE) Events Establishes the core products of Process Systems Engineering/Computer Aided Process Engineering Defines the future challenges of the Process Systems Engineering/Computer Aided Process Engineering community

Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.