Download or read book Design and Development of a Programmable Logic Controller and a Microcontroller System Design Tool written by Gandhi Puvvada and published by . This book was released on 1987 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microcontroller System Design Using PIC18F Processors written by Haddad, Nicolas K. and published by IGI Global. This book was released on 2017-03-31 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements in technology have led to significant improvements in designing various electronic systems. This provides a wide range of different components that can be utilized across numerous applications. Microcontroller System Design Using PIC18F Processors provides comprehensive discussions on strategies and techniques for optimizing microprocessor-based electronic system development and examines methods for acquiring improved software and hardware skills. Highlighting innovative concepts across a range of topics, such as serial peripheral interfaces, addressing modes, and asynchronous communications, this book is an ideal information source for professionals, researchers, academics, engineers, practitioners, and programmers.

Download or read book Digital System Design Use of Microcontroller written by Shenouda Dawoud and published by CRC Press. This book was released on 2022-09-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.

Download or read book Classical and Modern Controls with Microcontrollers written by Ying Bai and published by Springer. This book was released on 2018-12-13 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the design, implementation and applications of embedded systems and advanced industrial controls with microcontrollers. It combines classical and modern control theories as well as practical control programming codes to help readers learn control techniques easily and effectively. The book covers both linear and nonlinear control techniques to help readers understand modern control strategies. The author provides a detailed description of the practical considerations and applications in linear and nonlinear control systems. They concentrate on the ARM® Cortex®-M4 MCU system built by Texas InstrumentsTM called TM4C123GXL, in which two ARM® Cortex®-M4 MCUs, TM4C123GH6PM, are utilized. In order to help the reader develop and build application control software for a specified microcontroller unit. Readers can quickly develop and build their applications by using sample project codes provided in the book to access specified peripherals. The book enables readers to transfer from one interfacing protocol to another, even if they only have basic and fundamental understanding and basic knowledge of one interfacing function. Classical and Modern Controls with Microcontrollers is a powerful source of information for control and systems engineers looking to expand their programming knowledge of C, and of applications of embedded systems with microcontrollers. The book is a textbook for college students majored in CE, EE and ISE to learn and study classical and modern control technologies. The book can also be adopted as a reference book for professional programmers working in modern control fields or related to intelligent controls and embedded computing and applications. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Embedded Control System Design written by Alexandru Forrai and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging the gap between theory and practice. The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are faced with the challenge to design control systems and implement them in real-time.

Download or read book Digital System Design written by Dawoud Shenouda Dawoud and published by River Publishers. This book was released on 2010-04-10 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, embedded systems are widely deployed in just about every piece of machinery from toasters to spacecrafts, and embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but, more importantly, to satisfy numerous other constraints. To achieve these current goals, the designer must be aware of such design constraints and, more importantly, the factors that have a direct effect on them. One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand: single-purpose, general-purpose, or application specific. Microcontrollers are one member of the family of the application specific processors. Digital System Design concentrates on the use of a microcontroller as the embedded system's processor and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontrollers and is ideal for undergraduate students and engineers that are working in the field of digital system design.

Download or read book Microcontroller Programming written by Syed R. Rizvi and published by CRC Press. This book was released on 2011-11-03 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcontroller Programming: An Introduction is a comprehensive one-stop resource that covers the concepts, principles, solution development, and associated techniques involved in microcontroller-based systems. Focusing on the elements and features of the popular and powerful Motorola 68HC11 microcontroller IC as a representative example, this book is unlike others, which are often too broad in scope, delving into every topic of concern regarding microcontroller programmers. Instead, this text concentrates on design, architecture, and development, giving developers the tools to develop solid, effective embedded applications. Packaged with helpful examples, projects, and illustrations, this book gives an in-depth assessment of microcontroller design programming in both assembly and C. By illustrating the relatively sophisticated 8-bit 68HC11 microcontroller, the author—who is a consultant for NASA—provides a firsthand exploration and demonstration of the languages, tools, and techniques needed to build embedded applications. Readers can then apply their newly acquired skills to program other 8/16/32-bit microcontrollers. For readers who want to do more than just scrape the surface, this book is an enjoyable and immensely beneficial tool to help them cultivate a deeper understanding of microcontroller-based application development. An extensive supplements package is available free of charge to instructors who use the book for a course.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Building a Programmable Logic Controller with a PIC16F648A Microcontroller written by Murat Uzam and published by CRC Press. This book was released on 2017-12-19 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programmable logic controllers (PLCs) are extensively used in industry to perform automation tasks, with manufacturers offering a variety of PLCs that differ in functions, program memories, and the number of inputs/outputs (I/O). Not surprisingly, the design and implementation of these PLCs have long been a secret of manufacturers. Unveiling the mysteries of PLC technology, Building a Programmable Logic Controller with PIC16F648A Microcontroller explains how to design and use a PIC16F648A-microcontroller-based PLC. The author first described a microcontroller-based implementation of a PLC in a series of articles published in Electronics World magazine between 2008 and 2010. This book is based on an improved version of the project, including: Updates to the hardware configuration, with a smaller CPU board and two I/O extension boards that now support 16 inputs and 16 outputs instead of 8 An increased clock frequency of 20 MHz Improvements to several macros Flowcharts to help you understand the macros (functions) In this book, the author provides detailed explanations of hardware and software structures. He also describes PIC Assembly macros for all basic PLC functions, which are illustrated with numerous examples and flowcharts. An accompanying CD contains source files (.ASM) and object files (.HEX) for all of the examples in the book. It also supplies printed circuit board (PCB) (Gerber and .pdf) files so that you can have the CPU board and I/O extension boards produced by a PCB manufacturer or produce your own boards. Making PLCs more easily accessible, this unique book is written for advanced students, practicing engineers, and hobbyists who want to learn how to build their own microcontroller-based PLC. It assumes some previous knowledge of digital logic design, microcontrollers, and PLCs, as well as familiarity with the PIC16F series of microcontrollers and w

Download or read book Microcontroller Programming written by Julio Sanchez and published by CRC Press. This book was released on 2018-10-03 with total page 1141 pages. Available in PDF, EPUB and Kindle. Book excerpt: From cell phones and television remote controls to automobile engines and spacecraft, microcontrollers are everywhere. Programming these prolific devices is a much more involved and integrated task than it is for general-purpose microprocessors; microcontroller programmers must be fluent in application development, systems programming, and I/O operation as well as memory management and system timing. Using the popular and pervasive mid-range 8-bit Microchip PIC® as an archetype, Microcontroller Programming offers a self-contained presentation of the multidisciplinary tools needed to design and implement modern embedded systems and microcontrollers. The authors begin with basic electronics, number systems, and data concepts followed by digital logic, arithmetic, conversions, circuits, and circuit components to build a firm background in the computer science and electronics fundamentals involved in programming microcontrollers. For the remainder of the book, they focus on PIC architecture and programming tools and work systematically through programming various functions, modules, and devices. Helpful appendices supply the full mid-range PIC instruction set as well as additional programming solutions, a guide to resistor color codes, and a concise method for building custom circuit boards. Providing just the right mix of theory and practical guidance, Microcontroller Programming: The Microchip PIC® is the ideal tool for any amateur or professional designing and implementing stand-alone systems for a wide variety of applications.

Download or read book Embedded Systems Design using the MSP430FR2355 LaunchPadTM written by Brock J. LaMeres and published by Springer Nature. This book was released on 2020-06-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. LEARN BY EXAMPLE – This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing. LEARN BY DOING – This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn. LEARN BOTH ASSEMBLY AND C – The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to “make things work”. BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

Download or read book PIC16F1847 Microcontroller Based Programmable Logic Controller written by Murat Uzam and published by CRC Press. This book was released on 2020-10-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The PIC16F1847-Based PLC project supports up to 4 analog inputs and 1 analog output, 1 High Speed Counter, 2 PWM (pulse width modulation) outputs, 1 Drum Sequencer Instruction with up to 16 steps, the implementation of Sequential Function Charts (SFCs) with up to 24 steps. This volume presents advanced concepts of the PIC16F1847-Based PLC project and consists of topics like program control, high speed counter and PWM macros. It further explains memory related drum sequencer instruction, sequential functional charts, and analog input and output modules. Aimed at researchers and graduate students in electrical engineering, power electronics, robotics and automation, sensors, this book: Presents program control macros to enable or disable a block of PLC program or to move execution of a program from one place to another. Proposes a High-Speed Counter and four PWM Macros for high speed counting and PWM operations. Develops memory related macros to enable the user to do memory read/write operations. Provides a Drum Sequencer instruction with up to 16 steps and 16 outputs on each step. Discusses the implementation of Sequential Function Chart (SFC) elements with up to 24 steps.

Download or read book Designing Embedded Systems with PIC Microcontrollers written by Tim Wilmshurst and published by Elsevier. This book was released on 2006-10-24 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems with PIC Microcontrollers: Principles and Applications is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, the book provides an in-depth treatment of microcontroller design as well as programming in both assembly language and C, along with advanced topics such as techniques of connectivity and networking and real-time operating systems. In this one book students get all they need to know to be highly proficient at embedded systems design. This text combines embedded systems principles with applications, using the16F84A, 16F873A and the 18F242 PIC microcontrollers. Students learn how to apply the principles using a multitude of sample designs and design ideas, including a robot in the form of an autonomous guide vehicle. Coverage between software and hardware is fully balanced, with full presentation given to microcontroller design and software programming, using both assembler and C. The book is accompanied by a companion website containing copies of all programs and software tools used in the text and a 'student' version of the C compiler. This textbook will be ideal for introductory courses and lab-based courses on embedded systems, microprocessors using the PIC microcontroller, as well as more advanced courses which use the 18F series and teach C programming in an embedded environment. Engineers in industry and informed hobbyists will also find this book a valuable resource when designing and implementing both simple and sophisticated embedded systems using the PIC microcontroller. *Gain the knowledge and skills required for developing today's embedded systems, through use of the PIC microcontroller.*Explore in detail the 16F84A, 16F873A and 18F242 microcontrollers as examples of the wider PIC family.*Learn how to program in Assembler and C.*Work through sample designs and design ideas, including a robot in the form of an autonomous guided vehicle.*Accompanied by a CD-ROM containing copies of all programs and software tools used in the text and a 'student' version of the C complier.

Download or read book PIC16F1847 Microcontroller Based Programmable Logic Controller Three Volume Set written by Murat Uzam and published by CRC Press. This book was released on 2020-10-23 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programmable logic controllers (PLCs) have been used extensively and are offered in terms of functions, program memories, and the number of inputs/outputs (I/Os), ranging from a few to thousands. With a focus on how to design and implement a PLC, this set explains hardware and associated basic concepts, intermediary and advanced concepts of PLC (using PIC16F1847 microcontroller). Flowcharts are provided to help the understanding of macros (instructions). Twenty application examples to show how to use the PIC16F1847-Based PLC in different control applications, related files for hardware and software components, and appendices are also provided. Aimed at researchers and graduate students in electrical engineering, power electronics, robotics and automation, sensors, this book: Explains how to design and use a PIC16F1847 microcontroller-based PLC including easy to use software structures. Covers concepts like Contact and Relay Based Macros, Flip-Flop Macros, Timer Macros, Counter Macros and Comparison Macros. Presents arithmetical and logical macros to carry out arithmetical and logical operations to be used for 8-bit or 16-bit variables and/or constant values. Illustrates program control macros to enable or disable a block of PLC program or to move execution of a program from one place to another. Discusses the implementation of Sequential Function Chart (SFC) elements with up to 24 steps.

Download or read book PIC16F1847 Microcontroller Based Programmable Logic Controller written by Murat Uzam and published by CRC Press. This book was released on 2020-10-23 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programmable logic controllers (PLCs) have been used extensively and are offered in terms of functions, program memories, and the number of inputs/outputs (I/Os), ranging from a few to thousands. With a focus on how to design and implement a PLC, this volume explains hardware and associated basic concepts of PLC. Authors have used PIC16F1847 microcontroller with: 8192 words of Flash program memory, 1024 bytes of SRAM data memory, 256 bytes of EEPROM data memory, the maximum operating speed of 32 MHz, 16-level deep hardware stack, an enhanced instruction set consisting of 49 single-word instructions. Flowcharts are provided to help the understanding of macros (instructions). Aimed at researchers and graduate students in electrical engineering, power electronics, robotics and automation, sensors, this book: Explains how to design and use a PIC16F1847 microcontroller-based PLC. Provides easy to use software structures written by using the PIC Assembly programming language. Describes a PLC from a designer's perspective. Explains the basic hardware and basic software structures of the PIC16F1847 based PLC. Focuses on concepts like Contact and Relay Based Macros, Flip-Flop Macros, Timer Macros, Counter Macros and Comparison Macros.

Download or read book Design of Embedded Systems Using 68HC12 11 Microcontrollers written by Richard E. Haskell and published by . This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEATURES/BENEFITS *A bridge between the 68HC12 and the 68HC11 - Focuses on the 68HC12, but includes material for (and provides software for) the older 68HC11. *A new version of Forth - WHYP (Words to Help You Program) - designed for use in embedded systems. WHYP can easily be installed on any 68HC12 system, including the most popular development boards from Motorola and Axiom Manufacturing. It consists of two parts-some 68HC12 subroutines that reside on the target system (typically an evaluation board) and a C++ program that runs on a PC and communicates with the 68HC12 target system through a serial line. It is a sub-routine threaded language, which means that WHYP words are just the names of 68HC12(11) subroutines. New WHYP words can be defined simply by stringing previously defined WHYP words together. The first five chapters of the text explain how to make the programming of the 68HC12 simple and interactive, and in the process develops the entire WHYP language from scratch, step by step. (The software is provided on disk with the text, and the latest versions of the software will be available on the authors web site.) *An abundance of worked examples and many chapter-end exerc

Download or read book Embedded Systems Design Using the TI MSP430 Series written by Chris Nagy and published by Elsevier. This book was released on 2003-10-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about designing, programming, and developing with the popular new Texas Instruments family of microcontrollers, the MSP430 series with this new book from Chris Nagy. This product line is experiencing explosive growth due to its low-power consumption and powerful features, but very little design and application information is available other than what is offered by the manufacturer. The book fills a gap in the technical literature for embedded systems engineers by offering a more complete combination of technical data, example code, and descriptive prose than is available from the manufacturer reference information, and is useful to both professionals and hobbyists.Intended for embedded engineers who are new to the embedded field, or for the thousands of engineers who have experience with other microcontrollers (such as PICs, 8051s, or Motorola HC0x devices) but are new to the MSP430 line, Chris Nagy offers a thorough and practical description of the device features, gives development guidelines, and provides design examples. Code examples are used in virtually every chapter and online. The book is divided into three sections: the first section provides detailed descriptions of the devices themselves; the second describes hardware/firmware development for the devices; the third is designed to incorporate information from the first two, and provide guidelines and examples of designs. - Get up-to-speed on the TI MSP430 product family's features and idiosyncrasies - A 'hand-holding' reference to help get started on designs