Download or read book Design and Construction of Composite Floor Systems written by E. Y. L. Chien and published by [Willowdale, Ont.] : Canadian Institute of Steel Construction. This book was released on 1984-01-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Construction in Steel and Concrete IV written by Jerome F. Hajjar and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 85 papers presented at the Composite Construction in Steel and Concrete IV Conference, held in Banff, Alberta, Canada, May 28-June 2, 2000.
Download or read book Tall Building Design written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-10-04 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the Question Frequently Proposed to the Designer by Architects: "Can We Do This? Offering guidance on how to use code-based procedures while at the same time providing an understanding of why provisions are necessary, Tall Building Design: Steel, Concrete, and Composite Systems methodically explores the structural behavior of steel, concrete, and composite members and systems. This text establishes the notion that design is a creative process, and not just an execution of framing proposals. It cultivates imaginative approaches by presenting examples specifically related to essential building codes and standards. Tying together precision and accuracy—it also bridges the gap between two design approaches—one based on initiative skill and the other based on computer skill. The book explains loads and load combinations typically used in building design, explores methods for determining design wind loads using the provisions of ASCE 7-10, and examines wind tunnel procedures. It defines conceptual seismic design, as the avoidance or minimization of problems created by the effects of seismic excitation. It introduces the concept of performance-based design (PBD). It also addresses serviceability considerations, prediction of tall building motions, damping devices, seismic isolation, blast-resistant design, and progressive collapse. The final chapters explain gravity and lateral systems for steel, concrete, and composite buildings. The Book Also Considers: Preliminary analysis and design techniques The structural rehabilitation of seismically vulnerable steel and concrete buildings Design differences between code-sponsored approaches The concept of ductility trade-off for strength Tall Building Design: Steel, Concrete, and Composite Systems is a structural design guide and reference for practicing engineers and educators, as well as recent graduates entering the structural engineering profession. This text examines all major concrete, steel, and composite building systems, and uses the most up-to-date building codes.
Download or read book Design and Analysis of Tall and Complex Structures written by Feng Fu and published by Butterworth-Heinemann. This book was released on 2018-02-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures. This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures. - Numerous worked-through examples of existing prestigious projects around the world (such as Jeddah Tower, Shanghai Tower, and Petronas Tower etc.) are provided to assist the reader's understanding of the topic - Provides the latest modelling methods in design such as BIM and Parametric Modelling technique - Detailed explanations of widely used programs in current design practice, such as SAP2000, ETABS, ANSYS, and Rhino - Modelling case studies for all types of tall buildings and complex structures, such as: Buttressed Core system, diagrid system, Tube system, Tensile structures and offshore structures etc.
Download or read book Building Design and Construction Handbook written by Frederick S. Merritt and published by McGraw-Hill Companies. This book was released on 1982 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides updated, comprehensive, and practical information and guidelines on aspects of building design and construction, including materials, methods, structural types, components, and costs, and management techniques.
Download or read book Composite Steel Structures written by R. Narayanan and published by CRC Press. This book was released on 1987-07-09 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The constant need for cost-effective structural forms has led to the increasing use of composite construction, and a substantial amount of research effort is currently being spent in developing techniques for combining concrete and steel effectively. Significant economies in this form of construction have been observed, especially in bridges and building floors. Codes of Practice on composite construction are being revised in the UK and in Europe, in the light of the substantial amount of knowledge that has been generated in recent years. An International Conference organised by the Department of Civil and Structural Engineering, University College, Cardiff, UK, with the specific objective of discussing all types of metal structures in an integrated way, provided a forum for the dissemination of new concepts and for reviewing developments; the expectations of the organisers have been amply justified and exceeded by the level of international response to the call for papers. This volume contains 17 papers on composite steel structures, presented at the Conference, many of which were by well-known experts in their respective fields.
Download or read book Design of Composite Beams with Large Web Openings written by R. M. Lawson and published by . This book was released on 2011 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Plated Structures written by N.E. Shanmugam and published by Elsevier. This book was released on 2021-09-30 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design of Plated Structures: Stability, Second Edition covers the latest developments in new plate solutions and structural models for plate analysis. Completely revised and updated by its distinguished editors and international team of contributors, this edition also contains new chapters on GBT-based stability analysis and the finite strip and direct strength method (DSM). Other sections comprehensively cover bracing systems, storage tanks under wind loading, the analysis and design of light gauge steel members, applications of high strength steel members, cold-formed steel pallet racks, and the design of curved steel bridges. This is a comprehensive reference for graduate students, researchers and practicing engineers in the fields of civil, structural, aerospace, mechanical, automotive and marine engineering. Features new chapters on the stability behavior of composite plates such as laminated composite, functionally graded, and steel concrete composite plate structures Includes newly developed numerical simulation methods and new plate models Provides generalized beam theory for analyzing thin-walled structures
Download or read book Structural Design of Low Rise Buildings in Cold Formed Steel Reinforced Masonry and Structural Timber written by J. R. Ubejd Mujagic and published by McGraw Hill Professional. This book was released on 2012-04-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise guide to the structural design of low-rise buildings in cold-formed steel, reinforced masonry, and structural timber This practical reference discusses the types of low-rise building structural systems, outlines the design process, and explains how to determine structural loadings and load paths pertinent to low-rise buildings. Characteristics and properties of materials used in the construction of cold-formed steel, reinforced masonry, and structural timber buildings are described along with design requirements. The book also provides an overview of noncomposite and composite open-web joist floor systems. Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations. Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber covers: Low-rise building systems Loads and load paths in low-rise buildings Design of cold-formed steel structures Structural design of reinforced masonry Design of structural timber Structural design with open-web joists
Download or read book Structural Analysis and Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-04-19 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software skills rise to the forefront of design concerns, the art of structural conceptualization is often minimized. Structural engineering, however, requires the marriage of artistic and intuitive designs with mathematical accuracy and detail. Computer analysis works to solidify and extend the creative idea or concept that might have started o
Download or read book Handbook of Structural Engineering written by W.F. Chen and published by CRC Press. This book was released on 2005-02-28 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The contributors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind- and earthquake-resistant design; design of prestressed structures; high-performance steel, concrete, and fiber-reinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety.
Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.
Download or read book 2018 International Plumbing Code Turbo Tabs Loose Leaf Version written by International Code Council and published by . This book was released on 2017-09-14 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An organized, structured approach to the 2018 INTERNATIONAL PLUMBING CODE Loose leaf Version, these TURBO TABS will help you target the specific information you need, when you need it. Packaged as pre-printed, full-page inserts that categorize the IPC into its most frequently referenced sections, the tabs are both handy and easy to use. They were created by leading industry experts who set out to develop a tool that would prove valuable to users in or entering the field.
Download or read book Comparative structure cost of modern commercial buildings written by S. J. Hicks and published by . This book was released on 2004 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Construction in Steel and Concrete written by C. Dale Buckner and published by . This book was released on 1988 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the First International Conference on Composite Construction, held in Henniker, New Hampshire, June 7-12, 1987. Sponsored by the Engineering Foundation. This collection contains 63 papers intended to exchange information in the field of composite construction, provide technology transfer between researchers and practitioners, promote the use of research in the development of design procedures, and identify research needs related to composite construction. Composite steel-concrete systems are used extensively for buildings, bridges, and other civil engineering structures. Research and development related to composite construction are in progress throughout the world. Efforts to improve economy and efficiency of structures, to implement new design and construction techniques, to incorporate new and improved materials, and to devise methods to rehabilitate and strengthen existing structures all contribute to advancing the state-of-the-art in this field. Researchers and practitioners in the field of composite construction need to meet periodically to exchange information related to these topics. Such exchanges avoid duplication of research efforts, provide transfer of technology, spur new developments and promote consistency of codes. Both new construction and rehabilitation of existing structures are discussed.
Download or read book Composite Floor Systems written by Derek Mullett and published by Wiley-Blackwell. This book was released on 1998-04-29 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all the main types of composite (steel/concrete) floor construction and features the latest development in 'slim floor' construction. General design guidance and practical details are given for each method of construction and, where appropriate, test evidence is provided. Worked examples further explain the method of analysis.
Download or read book CLT Handbook written by Erol Karacabeyli and published by . This book was released on 2013-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
