Download or read book Design and Characterization of Analog Integrated Circuits in CMOS and BiCMOS Thecnologies for Low Power and RF Applications written by Andrea Maniero and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realization of signal sampling and quantization at high sample rates with low power dissipation is an important goal in many applications, includ ing portable video devices such as camcorders, personal communication devices such as wireless LAN transceivers, in the read channels of magnetic storage devices using digital data detection, and many others. This paper describes architecture and circuit approaches for the design of high-speed, low-power pipeline analog-to-digital converters in CMOS. Here the term high speed is taken to imply sampling rates above 1 Mhz. In the first section the dif ferent conversion techniques applicable in this range of sample rates is dis cussed. Following that the particular problems associated with power minimization in video-rate pipeline ADCs is discussed. These include optimi zation of capacitor sizes, design of low-voltage transmission gates, and opti mization of switched capacitor gain blocks and operational amplifiers for minimum power dissipation. As an example of the application of these tech niques, the design of a power-optimized lO-bit pipeline AID converter (ADC) that achieves =1. 67 mW per MS/s of sampling rate from 1 MS/s to 20 MS/s is described. 2. Techniques for CMOS Video-Rate AID Conversion Analog-to-digital conversion techniques can be categorized in many ways. One convenient means of comparing techniques is to examine the number of "analog clock cycles" required to produce one effective output sample of the signal being quantized.

Download or read book Analysis and Design of Analog Integrated Circuits written by Paul R. Gray and published by Wiley. This book was released on 1993 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition combines the consideration of metal-oxide-semiconductors (MOS) and bipolar circuits into a unified treatment that also includes MOS-bipolar connections made possible by BiCMOS technology. Contains extensive use of SPICE, especially as an integral part of many examples in the problem sets as a more accurate check on hand calculations and as a tool to examine complex circuit behavior beyond the scope of hand analysis. Concerned largely with the design of integrated circuits, a considerable amount of material is also included on applications.

Download or read book CMOS Analog Integrated Circuits written by Tertulien Ndjountche and published by CRC Press. This book was released on 2019-12-17 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components.

Download or read book Low Power Design Techniques and CAD Tools for Analog and RF Integrated Circuits written by Piet Wambacq and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides an overview of the current state of the art and very recent research results that have been achieved as part of the Low-Power Initiative of the European Union, in the field of analogue, RF and mixed-signal design methodologies and CAD tools.

Download or read book Low Voltage CMOS Log Companding Analog Design written by Francisco Serra-Graells and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Voltage CMOS Log Companding Analog Design presents in detail state-of-the-art analog circuit techniques for the very low-voltage and low-power design of systems-on-chip in CMOS technologies. The proposed strategy is mainly based on two bases: the Instantaneous Log Companding Theory, and the MOSFET operating in the subthreshold region. The former allows inner compression of the voltage dynamic-range for very low-voltage operation, while the latter is compatible with CMOS technologies and suitable for low-power circuits. The required background on the specific modeling of the MOS transistor for Companding is supplied at the beginning. Following this general approach, a complete set of CMOS basic building blocks is proposed and analyzed for a wide variety of analog signal processing. In particular, the covered areas include: amplification and AGC, arbitrary filtering, PTAT generation, and pulse duration modulation (PDM). For each topic, several case studies are considered to illustrate the design methodology. Also, integrated examples in 1.2um and 0.35um CMOS technologies are reported to verify the good agreement between design equations and experimental data. The resulting analog circuit topologies exhibit very low-voltage (i.e. 1V) and low-power (few tenths of uA) capabilities. Apart from these specific design examples, a real industrial application in the field of hearing aids is also presented as the main demonstrator of all the proposed basic building blocks. This system-on-chip exhibits true 1V operation, high flexibility through digital programmability and very low-power consumption (about 300uA including the Class-D amplifier). As a result, the reported ASIC can meet the specifications of a complete family of common hearing aid models. In conclusion, this book is addressed to both industry ASIC designers who can apply its contents to the synthesis of very low-power systems-on-chip in standard CMOS technologies, as well as to the teachers of modern circuit design in electronic engineering.

Download or read book Analog Circuit Design written by Willy Sansen and published by Springer Science & Business Media. This book was released on 1996-10-31 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the revised contributions of all the speakers of the fifth AACD Workshop which was held in Lausanne on April 2-4, 1996. It was organized by Dr Vlado Valence of the EPFL University and MEAD of Lausanne. The program consisted of six tutorials per day during three days. The tutorials were presented by experts in the field. They were selected by a program committee consisting of Prof. Willy Sansen of the Katholieke Universiteit Leuven, Prof. Rudy van de Plassche of Philips Research and the University of Technology Eindhoven and Prof. 10han Huijsing of the Delft University of Technology. The three topics mentioned above have been selected because of their importance in present days analog design. The other topics that have been discussed before are: in 1992 : Operational amplifiers Analog to digital convereters Analog computer aided design in 1993 : Mixed AID cicuit design Sensor interface circuits Communication circuits in 1994 : Low-power low-voltage design Integrated filters Smart power circuits in 1995 : Low-noise, low-power, low-voltage design Mixed-mode design with CAD tools Voltage, current and time references Each AACD workhop has given rise to the publication of a book by Kluwer entitled "Analog Circuit Design". This is thus the fifth book. This series of books provides a valuable overview of all analog circuit design techniques and achievements. It is a reference for whoever is engaged in this discipline.

Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on three topics: Volt Electronics; Design and Implementation of Mixed-Mode Systems; Low-Noise and RF Power Amplifiers for Telecommunication. The book comprises six papers on each topic written by internationally recognised experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I, Volt Electronics, presents some of the circuit design challenges which are having to be met as the need for more electronics on a chip forces smaller transistor dimensions, and thus lower breakdown voltages. The papers cover techniques for 1-Volt electronics. Part II, Design and Implementation of Mixed-Mode Systems, deals with the various problems that are encountered in mixed analog-digital design. In the future, all integrated circuits are bound to contain both digital and analog sub-blocks. Problems such as substrate bounce and other substrate coupling effects cause deterioration in signal integrity. Both aspects of mixed-signal design have been addressed in this section and it illustrates that careful layout techniques embedded in a hierarchical design methodology can allow us to cope with most of the challenges presented by mixed analog-digital design. Part III, Low-noise and RF Power Amplifiers for Telecommunication, focuses on telecommunications systems. In these systems low-noise amplifiers are front-ends of receiver designs. At the transmitter part a high-performance, high-efficiency power amplifier is a critical design. Examples of both system parts are described in this section. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.

Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the revised contributions of all the speakers of the fifth AACD Workshop which was held in Lausanne on April 2-4, 1996. It was organized by Dr Vlado Valence of the EPFL University and MEAD of Lausanne. The program consisted of six tutorials per day during three days. The tutorials were presented by experts in the field. They were selected by a program committee consisting of Prof. Willy Sansen of the Katholieke Universiteit Leuven, Prof. Rudy van de Plassche of Philips Research and the University of Technology Eindhoven and Prof. 10han Huijsing of the Delft University of Technology. The three topics mentioned above have been selected because of their importance in present days analog design. The other topics that have been discussed before are: in 1992 : Operational amplifiers Analog to digital convereters Analog computer aided design in 1993 : Mixed AID cicuit design Sensor interface circuits Communication circuits in 1994 : Low-power low-voltage design Integrated filters Smart power circuits in 1995 : Low-noise, low-power, low-voltage design Mixed-mode design with CAD tools Voltage, current and time references Each AACD workhop has given rise to the publication of a book by Kluwer entitled "Analog Circuit Design". This is thus the fifth book. This series of books provides a valuable overview of all analog circuit design techniques and achievements. It is a reference for whoever is engaged in this discipline.

Download or read book Analysis and Design of Analog Integrated Circuits written by Paul R Gray and published by . This book was released on 2012-11-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Analog and Mixed Signal Circuit Design written by Arjuna Marzuki and published by CRC Press. This book was released on 2020-05-12 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide a complete working knowledge of the Complementary Metal-Oxide Semiconductor (CMOS) analog and mixed-signal circuit design, which can be applied for System on Chip (SOC) or Application-Specific Standard Product (ASSP) development. It begins with an introduction to the CMOS analog and mixed-signal circuit design with further coverage of basic devices, such as the Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET) with both long- and short-channel operations, photo devices, fitting ratio, etc. Seven chapters focus on the CMOS analog and mixed-signal circuit design of amplifiers, low power amplifiers, voltage regulator-reference, data converters, dynamic analog circuits, color and image sensors, and peripheral (oscillators and Input/Output [I/O]) circuits, and Integrated Circuit (IC) layout and packaging. Features: Provides practical knowledge of CMOS analog and mixed-signal circuit design Includes recent research in CMOS color and image sensor technology Discusses sub-blocks of typical analog and mixed-signal IC products Illustrates several design examples of analog circuits together with layout Describes integrating based CMOS color circuit

Download or read book ANALYSIS AND DESIGN OF ANALOG INTEGRATED CIRCUITS 5TH ED ISV written by Paul R. Gray and published by John Wiley & Sons. This book was released on 2009-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: Engineers Special Features: " Updates the coverage of bipolar technologies" Enhances the discussion of biCMOS" Provides a more unified treatment of digital and analog circuit design while strengthening the coverage of CMOS" Removes the chapter on non-linear analog circuits" Adds a new operational amplifier example to chapter 11 About The Book: This is the only comprehensive book in the market for engineers that covers CMOS, bipolar technologies, and biCMOS integrated circuits. The fifth edition retains its completeness, updates the coverage of bipolar technologies, and enhances the discussion of biCMOS. It provides a more unified treatment of digital and analog circuit design while strengthening the coverage of CMOS. The chapter on non-linear analog circuits has been removed and chapter 11 has been updated to include an operational amplifier example. With its streamlined and up-to-date coverage, more engineers can turn to this resource to explore key concepts in the field.

Download or read book Analog BiCMOS Design written by James C. Daly and published by CRC Press. This book was released on 2018-10-08 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuits (ICs) don't always work the first time. Many things can and do go wrong in analog circuit designs. There are a number of common errors that often require costly chip redesign and refabrication, all of which can be avoided when designers are aware of the pitfalls. To realize success, IC designers need a complete toolbox-a toolbox filled not only with a solid background in electronics, design concepts and analysis skills, but also with the most valuable tool of all: experience. Analog BiCMOS Design offers IC design engineers the learning equivalent to decades of practical experience. Culled from the careers of practicing engineers, it presents the most effective methods and the pitfalls most frequently encountered in the design of biCMOS integrated circuits. Accessible to anyone who has taken a course in electronics, this book covers the basic design of bandgap voltage references, current mirrors, amplifiers, and comparators. It reviews common design errors often overlooked and offers design techniques used to remedy those problems. With its complete coverage of basic circuit building blocks, full details of common design pitfalls, and a compendium of design and layout problems and solutions, Analog BiCMOS Design is the perfect reference for IC designers and engineers, fledgling and experienced alike. Read it to reinforce your background, browse it for ideas on avoiding pitfalls, and when you run into a problem, use it to find a solution.

Download or read book BiCMOS Integrated Circuit Design written by IEEE Solid-State Circuits Council and published by Piscataway, N.J. : IEEE Press. This book was released on 1994 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date book, with its introductory tutorial, provides extensive coverage on BiCMOS, potentially the most important silicon technology of the 1990's. Many commercial products are currently utilizing BiCMOS ICs and an exponential growth is expected. Elmasry provides the latest information on processing technologies, circuit analysis, and techniques, and applications in the areas of analog, digital, and smart power. BiCMOS Integrated Circuit Design is an important guide for engineers working in BiCMOS processing, modeling, characterization, circuit design, and applications, as well as a valuable learning tool for college seniors and graduate students.

Download or read book Analog IC Design with Low Dropout Regulators Second Edition written by Gabriel A. Rincon-Mora and published by McGraw Hill Professional. This book was released on 2014-03-27 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE LATEST ANALOG IC DESIGN TECHNIQUES Fully revised and expanded to meet the emerging demands of mixedsignal systems, Analog IC Design with Low-Dropout Regulators, Second Edition, teaches analog IC concepts and explains how to use them to design, analyze, and build linear low-dropout (LDO) regulator ICs with bipolar, CMOS, and biCMOS semiconductor process technologies. The book draws physical insight from topics presented and illustrates how to develop and evaluate analog ICs for today's expanding wireless and mobile markets. Practical examples and end-of-chapter review questions reinforce important concepts and techniques developed in this cutting-edge guide. LEARN HOW TO: Evaluate power-supply systems Predict and specify how linear regulators perform and respond to variations in their supplies, loads, and other working conditions Work with semiconductor devices--resistors, capacitors, diodes, and transistors Combine microelectronic components to design current mirrors, differential pairs, differential amplifiers, linear low-dropout regulators, and their variants Close and stabilize feedback control loops that regulate voltages and currents Design circuits that establish reliable bias currents and reference circuits Determine the small-signal dynamics of analog ICs and analog systems Establish independent, stable, noise-free, and predictable power-supply voltages Implement overcurrent, thermal, reverse-battery, and ESD protection Test, measure, and evaluate linear regulator ICs

Download or read book Analog Circuit Design written by Michiel Steyaert and published by Springer Science & Business Media. This book was released on 2006-01-18 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design contains the contribution of 18 tutorials of the 14th workshop on Advances in Analog Circuit Design. Each part discusses a specific todate topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 14 in this successful series of Analog Circuit Design, providing valuable information and excellent overviews of analog circuit design, CAD and RF systems. Analog Circuit Design is an essential reference source for analog circuit designers and researchers wishing to keep abreast with the latest development in the field. The tutorial coverage also makes it suitable for use in an advanced design course.

Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Gabriele Manganaro and published by Academic Press. This book was released on 2013-05-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. Emerging research topics in RF IC design and its potential application Case studies and practical implementation examples Covers fundamental building blocks of a cellular base station system and satellite infrastructure Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face References to specialist papers for further reading