Download or read book Design and Analysis of Steel Plate Shear Walls written by Paula Winnifred Sinclair and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Plate Shear Walls with Gravity Load Theory and Design written by Yang Lv and published by Springer Nature. This book was released on 2022-02-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by subject experts based on the recent research results in steel plate shear walls considering the gravity load effect. It establishes a vertical stress distribution of the walls under compression and in-plane bending load and an inclination angle of the tensile field strip. The stress throughout the inclined tensile strip, as we consider the effect of the vertical stress distribution, is determined using the von Mises yield criterion. The shear strength is calculated by integrating the shear stress along the width. The proposed theoretical model is verified by tests and numerical simulations. Researchers, scientists and engineers in the field of structural engineering can benefit from the book. As such, this book provides valuable knowledge, useful methods, and practical algorithms that can be considered in practical design of building structures adopting a steel shear wall system.

Download or read book Design and Analysis of Steel Plate Shear Walls written by and published by . This book was released on 2008 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel plate shear walls are investigated as a lateral load resisting system with particular interest towards seismic loads. Past physical testing is studied in order to determine trends in failure modes and design considerations. Analysis is conducted on data from two, large scale, steel plate shear walls that were tested under quasi-static loading. The investigation includes energy dissipation, axial forces in members, bending moment, curvature, infill stresses, and shear distribution. Recommendations are made for future projects.

Download or read book Seismic Analysis and Design of Steel Plate Shear Walls written by Anjan Kanti Bhowmick and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Study of Steel Plate Shear Walls written by Geoffrey L. Kulak and published by Edmonton, Alta. : Department of Civil Engineering, University of Alberta. This book was released on 1983 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Analysis of Steel Plate Shear Walls written by and published by . This book was released on 1999 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Response Analysis of Steel Plate Shear Wall Systems Using Detailed and Simplified Models written by Arghya Kamal Chatterjee and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Recommendations for Perforated Steel Plate Shear Walls written by Ronny Purba and published by . This book was released on 2007 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Plate Shear Walls written by Rafael Sabelli and published by . This book was released on 2006 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Performance and Design of Steel Plate Shear Walls with Low Yield Point Steel Infill Plates written by Tadeh Zirakian and published by . This book was released on 2013 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel plate shear walls (SPSWs) have been frequently used as the primary or part of the primary lateral force-resisting system in design of low-, medium-, and high-rise buildings. Their application has been based on two different design philosophies as well as detailing strategies. Stiffened and/or stocky-web SPSWs with improved buckling stability and high seismic performance have been mostly used in Japan, which is one of the pioneering countries in design and application of these systems. Unstiffened and slender-web SPSWs with relatively lower buckling and energy dissipation capacities, on the other hand, have been deemed as a rather economical alternative and accordingly widely used in the United States and Canada. Development and use of low yield point (LYP) steel with considerably low yield stress and high elongation capacity provides the possibility to combine merits of these two distinctive design strategies, and consequently result in rather cost-effective and high-performing SPSW systems. Although some reported studies have demonstrated the advantages of LYP steel shear walls, various aspects of structural and seismic characteristics of these systems have not been investigated thoroughly. In particular, the linkage between structural specifications and seismic performance and pathway to performance-based design of these systems are largely undeveloped. Hence, systematic investigations are required to facilitate the seismic design and prevalent application of such promising lateral force-resisting and energy dissipating systems. Although some reported studies have demonstrated the advantages of LYP steel shear walls, various aspects of structural and seismic characteristics of these systems have not been investigated thoroughly. In particular, the linkage between structural specifications and seismic performance and pathway to performance-based design of these systems are largely undeveloped. Hence, systematic investigations are required to facilitate the seismic design and prevalent application of such promising lateral force-resisting and energy dissipating systems. The main objectives of this research are to evaluate the structural behavior and seismic performance of unstiffened LYP steel shear wall systems in a rather comprehensive manner. To achieve these objectives, element-level investigations on steel plates, component-level investigations on SPSW panels, and system-level investigations on multi-story steel frame-shear wall structures are performed in a hierarchical and systematic manner. Through detailed element- and component-level investigations, it is shown that employment of LYP steel infill plates in SPSW systems facilitates the design and effectively improves the buckling stability, serviceability, and energy absorption capacity of such lateral force-resisting systems. Some practical design tools and recommendations are also provided through analytical and numerical studies. In system-level investigations, the effectiveness of use of LYP steel material in design and retrofit construction is demonstrated through nonlinear time-history analysis as well as seismic response and performance assessment of multi-story structures subjected to earthquake ground motions representing various hazard levels. Ultimately, the fragility methodology is utilized by developing appropriate fragility functions for probabilistic seismic performance and vulnerability assessment of structures designed and retrofitted with conventional and LYP steel infill plates. The results of this study are indicative of relatively lower damage probability and superior seismic performance of LYP steel shear wall systems.

Download or read book Improving Steel Plate Shear Wall Code Design Methodology written by James Thomas Enright and published by . This book was released on 2014 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Steel Plate Shear Walls written by Geoffrey L. Kulak and published by . This book was released on 1983 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Steel Plate Shear Walls Using the Modified Strip Model written by Jonah James Shiskin and published by . This book was released on 2006 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Performance of Steel Plate Shear Walls Considering Various Design Approaches written by Ronny Hasudungan Purba and published by . This book was released on 2014 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This report presents the results of experimental and analytical studies to investigate the seismic performance of steel plate shear walls (SPSWs) considering different design philosophies of horizontal boundary elements (HBEs) and infill plates. The experimental study on a three-story SPSW specimen showed the development of HBE in-span hinges which resulted in an accumulation of plastic incremental deformations. A finite element investigation on the tested SPSW specimen demonstrated similar behavior. Furthermore, collapse assessment of SPSWs with various structural configurations (e.g., panel aspect ratio, seismic weight intensity, and number of stories) was conducted to investigate impact of haring of story shear forces between the boundary frames and infill plates on the performance of SPSWs. SPSWs designed with the current seismic performance factors specified in the ASCE7-10 and neglecting the contribution of their boundary moment resisting frames to resist story shear forces met the FEMA P695 performance criterion, while that was not the case for SPSWs designed considering the sharing of story shear forces between the boundary frame and infill plates. Adjusted seismic performance factors were required for the latter SPSWs to rigorously meet the FEMA P695 performance criteria. Most importantly, the latter SPSWs were found to have a higher probability to suffer significantly larger interstory drift than the former. This research extends work reported in "Impact of Horizontal Boundary Elements Design on Seismic Behavior of Steel Plate Shear Walls" by R. Purba and M. Bruneau, MCEER-10-0007. The finite element analysis was performed using the software ABAQUS/Standard while the collapse assessment was performed using the software OpenSees"--Page iii.

Download or read book Minimum Design Loads and Associated Criteria for Buildings and Other Structures written by American Society of Civil Engineers and published by ASCE Press. This book was released on 2022-02 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 7-22 provides requirements for general structural design and includes means for determining various loads and their combinations, which are suitable for inclusion in building codes and other documents.

Download or read book Metaheuristic Optimization Algorithms in Civil Engineering New Applications written by Ali Kaveh and published by Springer Nature. This book was released on 2020-04-14 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the application of metaheuristic algorithms in a number of important optimization problems in civil engineering. Advances in civil engineering technologies require greater accuracy, efficiency and speed in terms of the analysis and design of the corresponding systems. As such, it is not surprising that novel methods have been developed for the optimal design of real-world systems and models with complex configurations and large numbers of elements. This book is intended for scientists, engineers and students wishing to explore the potential of newly developed metaheuristics in practical problems. It presents concepts that are not only applicable to civil engineering problems, but can also used for optimizing problems related to mechanical, electrical, and industrial engineering. It is an essential resource for civil, mechanical and electrical engineers who use optimization methods for design, as well as for students and researchers interested in structural optimization.

Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.