Download or read book Permanent Magnet Synchronous Machines written by Sandra Eriksson and published by MDPI. This book was released on 2019-08-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.
Download or read book Control of Permanent Magnet Synchronous Motors written by Sadegh Vaez-Zadeh and published by Oxford University Press. This book was released on 2018-02-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnet synchronous (PMS) motors stand at the forefront of electric motor development due to their energy saving capabilities and performance potential. The motors have been developed in response to mounting environmental crises and growing electricity prices, and they have enabled the emergence of motor drive applications like those found in electric and hybrid vehicles, fly by wire, and drones. Control of Permanent Magnet Synchronous Motors is a timely advancement along that path as the first comprehensive, self-contained, and thoroughly up-to-date book devoted solely to the control of PMS motors. It offers a deep and extended analysis, design, implementation, and performance evaluation of major motor control methods, including Vector, Direct Torque, Predictive, Deadbeat, and Combined Control, in a systematic and coherent manner. All major Sensorless Control and Parameter Estimation methods are also studied. The book places great emphasis on energy saving control schemes.
Download or read book Permanent Magnet Motor Technology written by Jacek F. Gieras and published by CRC Press. This book was released on 2009-08-25 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of permanent magnet (PM) motor technology and its impact on electromechanical drives has grown exponentially since the publication of the bestselling second edition. The PM brushless motor market has grown considerably faster than the overall motion control market. This rapid growth makes it essential for electrical and electromechanical engineers and students to stay up-to-date on developments in modern electrical motors and drives, including their control, simulation, and CAD. Reflecting innovations in the development of PM motors for electromechanical drives, Permanent Magnet Motor Technology: Design and Applications, Third Edition demonstrates the construction of PM motor drives and supplies ready-to-implement solutions to common roadblocks along the way. This edition supplies fundamental equations and calculations for determining and evaluating system performance, efficiency, reliability, and cost. It explores modern computer-aided design of PM motors, including the finite element approach, and explains how to select PM motors to meet the specific requirements of electrical drives. The numerous examples, models, and diagrams provided in each chapter facilitate a lucid understanding of motor operations and characteristics. This 3rd edition of a bestselling reference has been thoroughly revised to include: Chapters on high speed motors and micromotors Advances in permanent magnet motor technology Additional numerical examples and illustrations An increased effort to bridge the gap between theory and industrial applications Modified research results The growing global trend toward energy conservation makes it quite possible that the era of the PM brushless motor drive is just around the corner. This reference book will give engineers, researchers, and graduate-level students the comprehensive understanding required to develop the breakthroughs that will push this exciting technology to the forefront.
Download or read book Advanced Direct Thrust Force Control of Linear Permanent Magnet Synchronous Motor written by Muhammad Ali Masood Cheema and published by Springer Nature. This book was released on 2020-02-13 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the direct thrust force control (DTFC) of tubular surface-mount linear permanent magnet synchronous motors (linear PMSMs). It presents a detailed account and analysis of several advanced nonlinear control schemes, based on the direct thrust control principle, to achieve a reduction in steady-state ripple in thrust force with faster transient response, and describes their experimental validation. It also provides rigorous details of the dynamic modelling of linear PMSMs from a control system perspective, and demonstrates the superior control performance of the proposed techniques compared to the current state-of-the-art techniques. Lastly, the book proposes and validates a stator flux observer for sensorless speed estimation comprising a linear state observer and an improved sliding mode component.
Download or read book Proceedings of Integrated Intelligence Enable Networks and Computing written by Krishan Kant Singh Mer and published by Springer Nature. This book was released on 2021-04-23 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents best selected research papers presented at the First International Conference on Integrated Intelligence Enable Networks and Computing (IIENC 2020), held from May 25 to May 27, 2020, at the Institute of Technology, Gopeshwar, India (Government Institute of Uttarakhand Government and affiliated to Uttarakhand Technical University). The book includes papers in the field of intelligent computing. The book covers the areas of machine learning and robotics, signal processing and Internet of things, big data and renewable energy sources.
Download or read book Brushless Permanent Magnet Motor Design written by Duane C. Hanselman and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explaining techniques for magnetic modelling and circuit analysis, this book shows how magnetic circuit analysis applies to motor design. It describes the major aspects of motor operation and design, and develops design equations for radial flux and axial flux motors. It is intended for electrical, electronics and mechanical engineers.
Download or read book Limits Modeling and Design of High Speed Permanent Magnet Machines written by Aleksandar Borisavljevic and published by Springer Science & Business Media. This book was released on 2012-10-31 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing number of applications that require fast-rotating machines; motivation for this thesis comes from a project in which downsized spindles for micro-machining have been researched. The thesis focuses on analysis and design of high-speed PM machines and uses a practical design of a high-speed spindle drive as a test case. Phenomena, both mechanical and electromagnetic, that take precedence in high-speed permanent magnet machines are identified and systematized. The thesis identifies inherent speed limits of permanent magnet machines and correlates those limits with the basic parameters of the machines. The analytical expression of the limiting quantities does not only impose solid constraints on the machine design, but also creates the way for design optimization leading to the maximum mechanical and/or electromagnetic utilization of the machine. The models and electric-drive concepts developed in the thesis are evaluated in a practical setup.
Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.
Download or read book Computer Engineering in Applied Electromagnetism written by Slawomir Wiak and published by Springer Science & Business Media. This book was released on 2006-06-07 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Engineering in Applied Electromagnetism contains papers which were presented at the International Symposium on Electromagnetic Fields in Electrical Engineering, held in Maribor, Slovenia, 18-20 September 2003. It consists of three parts, Computational Techniques, Electromagnetic Engineering, and Special Applications. The contributions selected for the book cover a wide spectrum of theory and practice, being simultaneously of high theoretical level and deeply rooted in engineering problems. Thus, this volume touches on what is of key importance in electromagnetism.
Download or read book The Rediscovery of Synchronous Reluctance and Ferrite Permanent Magnet Motors written by Gianmario Pellegrino and published by Springer. This book was released on 2016-04-28 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an essential compendium on the analysis and design of synchronous motors for variable-speed applications. Focusing on synchronous reluctance and ferrite permanent-magnet (PM) synchronous reluctance machines, it provides a broad perspective on three-phase machines for variable speed applications, a field currently dominated by asynchronous machines and rare-earth PM synchronous machines. It also describes synchronous reluctance machines and PM machines without rare-earth materials, comparing them to state-of-the-art solutions. The book provides readers with extensive information on and finite element models of PM synchronous machines, including all relevant equations and with an emphasis on synchronous-reluctance and PM-assisted synchronous-reluctance machines. It covers ferrite-assisted machines, modeled as a subcase of PM-assistance, fractional slot combinations solutions, and a quantitative, normalized comparison of torque capability with benchmark PM machines. The book discusses a wealth of techniques for identifying machine parameters, with an emphasis on self-commissioning algorithms, and presents methods for automated machine design and optimization, including a software tool developed for this purpose. Addressing an important gap in the field of PM-less and less-PM electrical machines, it is intended as a self-contained reference guide for both graduate students and professional machine designers, and as a useful text for university courses on automated and/or optimized design of electrical machines and drives.
Download or read book Advanced Theory of Fractional Slot Concentrated Wound Permanent Magnet Synchronous Machines written by Mohammad Farshadnia and published by Springer. This book was released on 2018-03-27 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the analytical modeling of fractional-slot concentrated-wound (FSCW) interior permanent magnet (IPM) machines and establishes a basis for their magnetic and electrical analysis. Aiming at the precise modeling of FSCW IPM machines’ magnetic and electrical characteristics, it presents a comprehensive mathematical treatment of the stator magneto-motive force (MMF), the IPM rotor non-homogeneous magnetic saturation, and its airgap flux density. The FSCW stator spatial MMF harmonics are analytically formulated, providing a basis on which a novel heuristic algorithm is then proposed for the design of optimal winding layouts for multiphase FSCW stators with different slot/pole combinations. In turn, the proposed mathematical models for the FSCW stator and the IPM rotor are combined to derive detailed mathematical expressions of its operational inductances, electromagnetic torque, torque ripple and their respective subcomponents, as a function of the machine geometry and design parameters. Lastly, the proposed theories and analytical models are validated using finite element analysis and experimental tests on a prototype FSCW IPM machine.
Download or read book Brushless Motors written by Duane Hanselman and published by . This book was released on 2012-07-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brushless Motors: Magnetic Design, Performance and Control is an outgrowth of the author's two previous books on this subject. This book contains significant additional material covering further aspects of magnetic design, performance, and electrical control. The primary goal of this book is to meet the needs of working engineers who have little or no experience in electric motor design and control. The book starts with basic concepts, provides intuitive reasoning for them, and gradually builds a set of understandable concepts that foster the development of usable knowledge. This book strives to provide a basis of knowledge that non-experts can use to develop practical expertise, making them more productive in their work and allowing them to productively explore other approaches to motor design, performance, and electrical control.
Download or read book Permanent magnet synchronous motor for industrial inverter applications analysis and design written by Tanja Heikkilä and published by . This book was released on 2002 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Brushless Permanent magnet Motors written by J. R. Hendershot and published by Clarendon Press. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brushless permanent-magnet motors provide simple, low maintenance, and easily controlled mechanical power. Written by two leading experts on the subject, this book offers the most comprehensive guide to the design and performance of brushless permanent-magnetic motors ever written. Topics range from electrical and magnetic design to materials and control. Throughout, the authors stress both practical and theoretical aspects of the subject, and relate the material to modern software-based techniques for design and analysis. As new magnetic materials and digital power control techniques continue to widen the scope of the applicability of such motors, the need for an authoritative overview of the subject becomes ever more urgent. Design of Brushless Permanent-Magnet Motors fits the bill and will be read by students and researchers in electric and electronic engineering.
Download or read book Electric Vehicle Machines and Drives written by K. T. Chau and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely comprehensive reference consolidates the research and development of electric vehicle machines and drives for electric and hybrid propulsions • Focuses on electric vehicle machines and drives • Covers the major technologies in the area including fundamental concepts and applications • Emphasis the design criteria, performance analyses and application examples or potentials of various motor drives and machine systems • Accompanying website includes the simulation models and outcomes as supplementary material
Download or read book 2020 23rd International Conference on Electrical Machines and Systems ICEMS written by IEEE Staff and published by . This book was released on 2020-11-24 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: To provide an opportunity for scientists and experts to present the latest research developments in the field of electrical machines and systems (rotating and other machines, power electronics, motion control, and motor drives) and to exchange useful information and experiences in research, trends and applications
Download or read book Permanent Magnet Reluctance Self Synchronous Motors written by Syed A. Nasar and published by Springer. This book was released on 1993-03-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent Magnet, Reluctance, and Self-Synchronous Motors discusses the theory, design, and control of permanent magnet materials. The book describes permanent magnets and their applications to electric machines as well as their performance characteristics and limitations. It presents the performance and calculations of PM commutator motors and an approach to their design. Permanent magnet synchronous motors, finite-element calculations, design methodologies, and rectangular and sinusoidal current control are discussed. It presents reluctance motors, their topologies and performance analyses as well as reluctance synchronous motors, with very large rotor saliency ratios, and their vector control. Numerical examples and data of practical interest are provided throughout the book. The book will be very useful to engineers involved in the design and manufacturing of permanent magnet and reluctance motors and high-performance drives, as well as electrical engineering students and educators.
