Download or read book Design and Analysis of Miniaturized Implantable and Wearable Microstrip Antennas written by Omar Abdulsamad Ibrahim and published by . This book was released on 2012 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing effort by hospitals, doctors and healthcare service providers to cut down the ever increasing cost of health care. One area of research in this field is the development of the MBAN system, which enables patient monitoring remotely thus saving costs in hospital stay, doctor visits etc. One area of research is the development of implantable and wearable antennas as a part of MBAN that could be used by saving their collected data in PDAs or any portable device or mainframe computers. In this work, two antenna types, the wearable and the implantable antennas are researched for MBAN applications. The antenna is designed using two different commercial software packages, CST Microwave Studio and HFSS, to validate the results. The first proposed embedded antenna design operates in the WMTS frequency band (608-614 MHz). The antenna performance is tested inside the human body model. The design is later readjusted to get the desired resonant frequency to account for the losses in the body dielectric. The resonant frequency, bandwidth, gain, and radiation pattern of the proposed antenna are provided in this research. In addition, an array of two antennas of the same type has been proposed to increase the system reliability and robustness. The wearable antenna proposed is a Vivaldi shaped Lotus antenna. The antenna was designed using the same software (CST Microwave Studio). The antenna is both multi and broad band. In addition, the antenna can be used for the free allocated band for wide band applications. A flare feeding technique has been used to feed the antenna and meet impedance matching for wide bandwidth. Analysis with bendable materials and different schemes for ground plane, including partial and metamaterials grounds, and flare angles has resulted in an optimized design for the wearable antenna type. Both the antenna design can be used as components for the MBAN systems for medical applications, and can also be used in the commercial and defense sectors.

Download or read book Wearable Antennas and Body Centric Communication written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2021-09-18 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art technologies, trends and applications with a focus on the healthcare domain for ultra-wideband (3.1–10.6 GHz) and 60 GHz (57–66 GHz) wireless communication systems. Due to various key features such as miniaturized antenna design, low power, high data rate, less effects on the human body, relatively less crowded spectrum, these technologies are becoming popular in various fields of biomedical applications and day-to-day life. The book highlights various aspects of these technologies related to body-centric communication, including antenna design requirements, channel modeling and characterization for WBANs, current fabrication and antenna design strategies for textile, flexible and implanted antennas. Apart from the general requirements and study related to these frequency bands, various application specific topics such as localization and tracking, physical activity recognition and assessment, vital sign monitoring and medical imaging are covered in detail. The book concludes with the glimpses of future aspects of the UWB and 60 GHz technology which includes IoT for healthcare and smart living, novel antenna materials and application of machine learning algorithms for overall performance enhancement.

Download or read book Printed Antennas written by Praveen Kumar Malik and published by CRC Press. This book was released on 2022-12-15 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection covers different printed microstrip antenna designs,from rectangular to circular, broadband, dual-band, and millimeter-wave microstrip antennas to microstrip arrays. It further presents a new analysis of the rectangular and circular microstrip antenna efficiency and surface wave phenomena. The book Covers the latest advances and applications of microstrip antennas Discusses methods and techniques used for the enhancement of the performance parameters of the microstrip antenna Presents low-power wide area network (LPWAN) proximity-coupled antenna for Internet of Things applications. Highlights a new analysis of rectangular and circular microstrip antenna efficiency and surface wave phenomena. Showcases implantable antennas, H-shaped antennas, and wideband implantable antennas for biomedical applications Printed Antennas discusses the latest advances such as the Internet of Things for antenna applications, device-to-device communication, satellite communication, and wearable textile antenna in the field of communication. It further presents methods and techniques used for the enhancement of the performance parameters of the microstrip antenna and covers the design of conformal and miniaturized antenna structures for various applications. It will serve as an ideal reference text for senior undergraduates, graduate students, and researchers in fields including electrical engineering, electronics and communications engineering, and computer engineering.

Download or read book Design and Optimization of Wearable Implantable and Edible Antennas written by Kavitha, K. and published by IGI Global. This book was released on 2024-08-16 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for integration of smart devices into our daily lives has led to a pressing challenge – the effective design and optimization of antennas for wearable and implantable applications. As our reliance on interconnected devices grows, so does the need for antennas that transcend their conventional roles and adapt to the diverse, dynamic needs of users. Addressing these challenges is vital, considering the unique demands imposed by this technology, ranging from size constraints to energy efficiency, biocompatibility, and signal integrity. Design and Optimization of Wearable, Implantable, and Edible Antennas, is an innovative work that confronts these challenges head-on. In this exploration, the book sheds light on the evolving landscape where electromagnetic research intersects with the demands of human life. As antennas seamlessly weave into attire, revolutionize healthcare through implants, and even find their place in edibles, this book serves as a guide for academic scholars, researchers, engineers, and students navigating the intricate terrain of antenna engineering.

Download or read book Microstrip Antenna Design for Wireless Applications written by Praveen Kumar Malik and published by CRC Press. This book was released on 2021-11-29 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers latest design and design parameters in the field of microstrip antenna. Discusses design of wearable antennas in detail. Presents design of conformal and miniaturized antenna structures for various applications. Covers methods and techniques for the enhancement of the performance parameters of the microstrip antenna. Discusses latest techniques in the field of microstrip antennas and it's applications

Download or read book Internet of Things Enabled Antennas for Biomedical Devices and Systems written by Praveen K. Malik and published by Springer Nature. This book was released on 2023-06-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists of the latest research in biomedical and communication integration. It discusses the fabrication and testing outcomes of the Internet of Things-enabled biomedical applications. The book focuses on recent advances in the field of planar antenna design and their applications in space communication, mobile communication, wireless communication, and wearable applications. Planar antennas are also used in medical applications in microwave imaging, medical implants, hyperthermia treatments, and wireless wellness monitoring. This book presents planar antenna design concepts, methods, and techniques to enhance the performance parameters and applications for IoT and device-to-device communication. It provides the latest techniques used for the design of antennas in terms of their structures, defected ground, MIMO, and fractal design. This book also addresses the specific steps to resolve issues in designing antennas and how to design conformal and miniaturized antenna structures for various applications.

Download or read book Smart Antennas written by Praveen Kumar Malik and published by Springer Nature. This book was released on 2022-02-03 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest techniques for the design of antenna, focusing specifically on the microstrip antenna. The authors discuss antenna structure, defected ground, MIMO, and fractal design. The book provides the design of microstrip antenna in terms of latest applications and uses in areas like IoT and device-to-device communication. The book also provides the current methods and techniques used for the enhancement of the performance parameters of the microstrip antenna. Chapters enhance the knowledge and skills of students and researchers in the latest in the communications world like IoT, D2D, satellite, wearable devices etc. The authors discuss applications such as microwave imaging, medical implants, hyperthermia treatments, and wireless wellness monitoring and how a decrease in size of antenna help facilitate application potential. Provides the latest techniques used for the design of antenna in terms of its structure, defected ground, MIMO and fractal design; Outlines steps to resolve issues with designing antenna, including the latest design and design parameters for microstrip antenna; Presents the design of conformal and miniaturized antenna structures for various applications.

Download or read book Printed Antenna written by Praveen Kumar Malik and published by . This book was released on 2022-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The text covers different printed microstrip antenna designs, such as from rectangular to a circular, broadband, dual-band, and millimeter-wave microstrip antenna to microstrip arrays. It further presents a new analysis of rectangular and circular microstrip antenna efficiency, and surface wave phenomena"--

Download or read book Array and Wearable Antennas written by Puran Gour and published by CRC Press. This book was released on 2024-03-20 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text highlights the designing of efficient, wearable, and textile antennas for medical and wireless applications. It further discusses antenna design for the Internet of Things, biomedical, and 5G applications. The book presents machine learning and deep learning techniques for antenna design and analysis. It also covers radio frequency, micro-electromechanical systems, and nanoelectromechanical systems devices for smart antenna design. This book: Explores wearable reconfigurable antennas for wireless communication and provide the latest technique in term of its structure, defective ground plane, and fractal design Focuses on current and future technologies related to antenna design, and channel characterization for different communication links, and applications Discusses machine learning techniques for antenna design and analysis Demonstrates how nano patch antenna resonates at multiple frequencies by varying the chemical potential Covers the latest antenna technology for microwave sensors, and for fiber optical sensor communications It is primarily for senior undergraduate, graduate students, and academic researchers in the fields of electrical engineering, electronics and communications engineering.

Download or read book Advances in Electronics Communication and Computing written by Akhtar Kalam and published by Springer. This book was released on 2017-10-27 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of research work in the interdisciplinary areas of electronics, communication, and computing. This book is specifically targeted at students, research scholars and academicians. The book covers the different approaches and techniques for specific applications, such as particle-swarm optimization, Otsu’s function and harmony search optimization algorithm, triple gate silicon on insulator (SOI)MOSFET, micro-Raman and Fourier Transform Infrared Spectroscopy (FTIR) analysis, high-k dielectric gate oxide, spectrum sensing in cognitive radio, microstrip antenna, Ground-penetrating radar (GPR) with conducting surfaces, and digital image forgery detection. The contents of the book will be useful to academic and professional researchers alike.

Download or read book Microstrip Antennas written by David M. Pozar and published by John Wiley & Sons. This book was released on 1995-05-15 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This anthology combines 15 years of microstrip antenna technology research into one significant volume and includes a special introductory tutorial by the co-editors. Covering theory, design and modeling techniques and methods, this source book is an excellent reference tool for engineers who want to become more familiar with microstrip antennas and microwave systems. Proven antenna designs, novel solutions to practical design problemsand relevant papers describing the theory of operation and analysis of microstrip antennas are contained within this convenient reference."

Download or read book Emerging Materials and Advanced Designs for Wearable Antennas written by Singh, Vinod Kumar and published by IGI Global. This book was released on 2021-03-19 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bendable wearable materials like conductive strands, fluid metallic mixes, and polymer in paper are generally utilized as a part of the current adaptable electronic gadgets. Extra necessities are implemented in wearable applications. Characteristic elastic, for example, is an appealing exchange adaptable material that is biocompatible and offers high conductivity, low lost, simplicity to make, and most importantly, it is water/climate safe and condition amicable. The wearable antenna is one of the key components to establish body area network (BAN) for wireless communication, which is why it has become such an important part of antenna research. Wearable antennas are being applied successfully in various parts of life such as health monitoring, physical training, navigation, RFID, medicine, military, and more. Emerging Materials and Advanced Designs for Wearable Antennas explores how wearable antenna technology is being employed to enhance the quality of life in various industries. The technologies implemented and success of these antenna technologies is essential in the emerging field of wearable computing and is discussed in detail within the contents of this book. While covering essential topics such as the optimization of antenna material, improvement in flexible antenna performance, synthesis and design aspects of antennas, and transmission and receiving of the bendable antenna, this book is ideal for the military field, scientists, the medical field, practitioners, stakeholders, researchers, academicians, and students looking for the most advanced and updated research on the technology and implementation of wearable antennas spanning multiple industries.

Download or read book Microstrip and Printed Antennas written by Debatosh Guha and published by John Wiley & Sons. This book was released on 2011-02-02 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on new techniques, analysis, applications and future trends of microstrip and printed antenna technologies, with particular emphasis to recent advances from the last decade Attention is given to fundamental concepts and techniques, their practical applications and the future scope of developments. Several topics, essayed as individual chapters include reconfigurable antenna, ultra-wideband (UWB) antenna, reflectarrays, antennas for RFID systems and also those for body area networks. Also included are antennas using metamaterials and defected ground structures (DGSs). Essential aspects including advanced design, analysis and optimization techniques based on the recent developments have also been addressed. Key Features: Addresses emerging hot topics of research and applications in microstrip and printed antennas Considers the fundamental concepts, techniques, applications and future scope of such technologies Discusses modern applications such as wireless base station to mobile handset, satellite earth station to airborne communication systems, radio frequency identification (RFID) to body area networks, etc. Contributions from highly regarded experts and pioneers from the US, Europe and Asia This book provides a reference for R&D researchers, professors, practicing engineers, and scientists working in these fields. Graduate students studying/working on related subjects will find this book as a comprehensive literature for understanding the present and future trends in microstrip and printed antennas.

Download or read book Analysis and Design of Broadband Reduced Surface Wave Antennas and Miniaturized Microstrip Antennas with Via Loading written by Hao Xu and published by . This book was released on 2006 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Engineering and Materials Science written by Abhineet Saini and published by CRC Press. This book was released on 2023-11-15 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which is part of a two-volume handbook set, gives a comprehensive description of recent developments in materials science and manufacturing technology, aiming primarily at its applications in biomedical science, advanced engineering materials, conventional/non-conventional manufacturing techniques, sustainable engineering design, and related domains. Manufacturing Engineering and Materials Science: Tools and Applications provides state-of-the-art research conducted in the fields of technological advancements in surface engineering, tribology, additive manufacturing, precision manufacturing, electromechanical systems, and computer-assisted design and manufacturing. The book captures emerging areas of materials science and advanced manufacturing engineering and presents the most recent trends in research for emerging researchers, field engineers, and academic professionals.

Download or read book Microstrip and Printed Antenna Design written by Randy Bancroft and published by IET. This book was released on 2009-06-30 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering extensive coverage of microstrip antennas, from rectangular and circular to broadband and dual-band, this text gives a complete introduction to useful designs and the implementation aspects of these types of antennas.

Download or read book Advancement in Microstrip Antennas with Recent Applications written by Ahmed Kishk and published by IntechOpen. This book was released on 2013-03-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses basic and advanced concepts of microstrip antennas, including design procedure and recent applications. Book topics include discussion of arrays, spectral domain, high Tc superconducting microstrip antennas, optimization, multiband, dual and circular polarization, microstrip to waveguide transitions, and improving bandwidth and resonance frequency. Antenna synthesis, materials, microstrip circuits, spectral domain, waveform evaluation, aperture coupled antenna geometry and miniaturization are further book topics. Planar UWB antennas are widely covered and new dual polarized UWB antennas are newly introduced. Design of UWB antennas with single or multi notch bands are also considered. Recent applications such as, cognitive radio, reconfigurable antennas, wearable antennas, and flexible antennas are presented. The book audience will be comprised of electrical and computer engineers and other scientists well versed in microstrip antenna technology.