Download or read book Design and Analysis of a Novel Doubly salient Permanent Magnet Generator written by Bulent Sarlioglu and published by . This book was released on 1999 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Analysis and Application of Magnetless Doubly Salient Machines written by Christopher H. T. Lee and published by Springer. This book was released on 2018-01-22 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the key characteristics of magnetless doubly salient machines, evaluates their design philosophies, and proposes new topologies for various applications. It discusses the background of and previous research on magnetless machines, while also outlining upcoming trends and potential future developments. The thesis begins by presenting various torque-improving structures – namely the multi-tooth structure, the double-rotor (DR) structure, the axial-field (AF) structure, and the flux-reversal (FR) structure – for magnetless machines. It subsequently addresses the idea of merging the design philosophies of two different machines to form new dual-mode machines. Thanks to a reconfigured winding arrangement and controllable DC-field excitation, the proposed machines can further extend their operating range to meet the extreme demands of applications in electric vehicles and wind power generation. Lastly, the thesis employs the finite element method (FEM) to thoroughly analyze the proposed machines’ key performance parameters and develops experimental setups to verify the proposed concepts.
Download or read book Operation Construction and Functionality of Direct Current Machines written by Amin, Muhammad and published by IGI Global. This book was released on 2015-04-30 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct current machines are a quickly evolving domain whose applications affect many aspects of modern life from computers and printers to toys, electric vehicles, and traction applications. As their many uses continue to grow, it has become apparent that understanding these machines is the key to understanding our future. Operation, Construction, and Functionality of Direct Current Machines brings together many concepts, from the most basic working principles and construction of DC machines to more advanced topics such as electro-magnetism, armature reaction, parallel operations, and many more. Highlighting theoretical concepts and numerical problems, this book is an essential reference source for students, educators, and anyone interested in the field of electric machines.
Download or read book Proceedings written by and published by . This book was released on 1999 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Conference on Power Electronics and Drive Systems written by and published by . This book was released on 2005 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Models for the Design of Electrical Machines written by Frédéric Dubas and published by MDPI. This book was released on 2021-03-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations.
Download or read book IAS 94 written by IEEE Industry Applications Society. Meeting and published by . This book was released on 1994 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Switched Reluctance Motor written by Ahmed Tahour and published by BoD – Books on Demand. This book was released on 2017-06-21 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last years, the switched reluctance machines (SRMs) have been the subject of significant developments. SRMs are gaining much interest because of their simplicity in structures, high-output power, high starting torque, wide speed range, rugged and robust construction, reliability, and low manufacturing costs, which make these machines viable for many applications. SRMs include machines of different structures whose common property is the significant variation in the shape of the air gap during rotation. The use of advanced control technologies makes possible the integration of the mechanical and electrical conversion systems in their optimal mode of operation. Different strategies of control can be applied to SRMs, depending on their mode of functioning and the purpose of their applications. The goal of this book is to present recent works on concept, control, and applications in switched reluctance machines.
Download or read book Proceedings of the 7th International Conference on Electrical Control and Computer Engineering Volume 1 written by Zainah Md. Zain and published by Springer Nature. This book was released on with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electric Generators Handbook Two Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2018-10-08 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Generators Handbook, Second Edition: Two-Volume Set supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs. The first volume, Synchronous Generators, explores large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds coverage of high-power wind generators with fewer or no PMs, PM-assisted DC-excited salient pole synchronous generators, autonomous synchronous generators’ control, line switching parameter identification for isolated grids, synthetic back-to-back load testing with inverter supply, and more. The second volume, Variable Speed Generators, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds material on doubly fed induction generator control under unbalanced voltage sags and nonlinear loads, interior permanent magnet claw-pole-alternator systems, high power factor Vernier PM generators, PM-assisted reluctance synchronous motors/generators for electric hybrid vehicles, and more.
Download or read book Synchronous Generators written by Ion Boldea and published by CRC Press. This book was released on 2015-09-03 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous Generators, the first of two volumes in the Electric Generators Handbook, offers a thorough introduction to electrical energy and electricity generation, including the basic principles of electric generators. The book devotes a chapter to the most representative prime mover models for transients used in active control of various generators. Then, individual chapters explore large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Discuss high-power wind generators with fewer or no permanent magnets (PMs) Cover PM-assisted DC-excited salient pole synchronous generators Present multiphase synchronous machine inductances via the winding function method Consider the control of autonomous synchronous generators Examine additional optimization design issues Illustrate the optimal design of a large wind generator by the Hooke–Jeeves method Detail the magnetic equivalent circuit population-based optimal design of synchronous generators Address online identification of synchronous generator parameters Explain the small-signal injection online technique Explore line switching (on or off) parameter identification for isolated grids Describe synthetic back-to-back load testing with inverter supply The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Synchronous Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2000 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Brushless Permanent Magnet Motor Design written by Duane C. Hanselman and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explaining techniques for magnetic modelling and circuit analysis, this book shows how magnetic circuit analysis applies to motor design. It describes the major aspects of motor operation and design, and develops design equations for radial flux and axial flux motors. It is intended for electrical, electronics and mechanical engineers.
Download or read book Alternative Fuels for Transportation written by A S Ramadhas and published by CRC Press. This book was released on 2016-04-19 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring how to counteract the world's energy insecurity and environmental pollution, this volume covers the production methods, properties, storage, engine tests, system modification, transportation and distribution, economics, safety aspects, applications, and material compatibility of alternative fuels. The esteemed editor highlights the importance of moving toward alternative fuels and the problems and environmental impact of depending on petroleum products. Each self-contained chapter focuses on a particular fuel source, including vegetable oils, biodiesel, methanol, ethanol, dimethyl ether, liquefied petroleum gas, natural gas, hydrogen, electric, fuel cells, and fuel from nonfood crops.
Download or read book Mechanical Design and Manufacturing of Electric Motors written by Wei Tong and published by CRC Press. This book was released on 2022-05-20 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition of Mechanical Design and Manufacturing of Electric Motors provides in-depth knowledge of design methods and developments of electric motors in the context of rapid increases in energy consumption, and emphasis on environmental protection, alongside new technology in 3D printing, robots, nanotechnology, and digital techniques, and the challenges these pose to the motor industry. From motor classification and design of motor components to model setup and material and bearing selections, this comprehensive text covers the fundamentals of practical design and design-related issues, modeling and simulation, engineering analysis, manufacturing processes, testing procedures, and performance characteristics of electric motors today. This Second Edition adds three brand new chapters on motor breaks, motor sensors, and power transmission and gearing systems. Using a practical approach, with a focus on innovative design and applications, the book contains a thorough discussion of major components and subsystems, such as rotors, shafts, stators, and frames, alongside various cooling techniques, including natural and forced air, direct- and indirect-liquid, phase change, and other newly-emerged innovative cooling methods. It also analyzes the calculation of motor power losses, motor vibration, and acoustic noise issues, and presents engineering analysis methods and case-study results. While suitable for motor engineers, designers, manufacturers, and end users, the book will also be of interest to maintenance personnel, undergraduate and graduate students, and academic researchers.
Download or read book Power Electronic Converter Configuration and Control for DC Microgrid Systems written by Jens Bo Holm-Nielsen and published by MDPI. This book was released on 2020-11-13 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DC/AC microgrid system is a crucial empowering technology for the integration of various types of renewable energy sources (RES) accompanied by a smart control approach to enhance the system reliability and efficiency. This book presents cutting-edge technology developments and recent investigations performed with the help of power electronics. Large-scale renewable energy integration presents challenges and issues for power grids. In particular, these issues include microgrid adaption to RES, AC machines, the new configuration of AC/DC converters, and electrification of domestic needs with optimal cost expenses from domestic standalone microgrids. Furthermore, this book elaborates cutting-edge developments in electric vehicle fast charging configuration, battery management, and control schemes with renewable energies through hardware-in-loop testing and validation for performance durability in real-time application. Overall, the book covers the diverse field of microgrids, allowing readers to adopt new technologies and prepare for future power demands with sustainable green engineering.
Download or read book General Airgap Field Modulation Theory for Electrical Machines written by Ming Cheng and published by John Wiley & Sons. This book was released on 2022-12-06 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: General Airgap Field Modulation Theory for Electrical Machines Introducing a new theory for electrical machines Air-gap magnetic field modulation phenomena have been widely observed in electrical machines. This book serves as the first English-language overview of these phenomena, as well as developing systematically for the first time a general theory by which to understand and research them. This theory not only serves to unify analysis of disparate electrical machines, from conventional DC machines, induction machines, and synchronous machines to unconventional flux-switching permanent magnet machines, Vernier machines, doubly-fed brushless machines etc., but also paves the way towards the creation of new electrical machine topologies. General Airgap Field Modulation Theory for Electrical Machines includes both overviews of key concepts in electrical machine engineering and in-depth specialized analysis of the novel theory itself. It works through the applications of the developed theory before proceeding to both qualitative analysis of the theory’s operating principles and quantitative analysis of its parameters. Readers will also find: The collective experience of four award-winning authors with long records of international scholarship on this subject Three separate chapters covering the principal applications of the theory, with detailed examples Discussion of potential innovations made possible by this theory General Airgap Field Modulation Theory for Electrical Machines is an essential introduction to this theory for postgraduates, researchers, and electrical engineers.
