Download or read book Description and Engineering Characteristics of Eleven New High temperature Alloys written by Ward F. Simmons and published by . This book was released on 1971 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Memorandum contains a description and summary of preliminary properties of eleven new alloys that are considered to be promising high-temperature materials. Most of them are in the experimental-application stage of their development; however, a few have reached the point where they can be considered commercial. Included are six nickel-base alloys, two iron-base alloys, one iron-nickel-base alloy, one cobalt base alloy, and one multicomponent alloy that contains primarily nickel and chromium. Following descriptions of composition and microstructure of each alloy, a large section of the memorandum is concerned with physical and mechanical properties, predominantly stress-rupture and creep properties. Oxidation and sulfidation as well as elevated temperature stability of the alloys is discussed. Information on processing and availability of the alloys is also given. (Author).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold and Hot Forging written by Taylan Altan and published by ASM International. This book was released on 2004-01-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Editors Altan (Ohio State University), Ngaile (North Carolina University), and Shen (Ladish Company, Inc.) offer this extensive overview of the latest developments in the design of forging operations and dies. Basic technological principles are briefly reviewed in the first two chapters.
Download or read book Proceedings of the Symposium on Properties of High Temperature Alloys with Emphasis on Environmental Effects written by Z. A. Foroulis and published by . This book was released on 1976 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forging Equipment Materials and Practices written by Taylan Altan and published by . This book was released on 1973 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides design engineers with up-to-date information about the many aspects of forging including descriptions of important developments made more recently by industry and/or government. The handbook describes suitable measures for in-process quality control and quality assurance, summarizes relationships between forging practices and important mechanical properties and compares various forging devices to aid in equipment selection. Attention is also given to describing practices for relatively new materials and emerging forging practices. (Modified author abstract).
Download or read book Fatigue Mechanisms written by J. T. Fong and published by ASTM International. This book was released on 1979 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Alloys written by Ulrich Heubner and published by CRC Press. This book was released on 2000-09-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the latest developments in nickel alloys and high-alloy special stainless steels by material number, price, wear rate in corrosive media, mechanical and metallurgical characteristics, weldability, and resistance to pitting and crevice corrosion. Nickel Alloys is at the forefront in the search for the most economic solutions to c
Download or read book High temperature Property Data written by Michael F. Rothman and published by ASM International(OH). This book was released on 1988 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume organizes information by alloy so that pertinent data can be found easily. Physical and mechanical properties from room temperature to temperatures in excess of 100 C are shown graphically or in tabular form. All data is thoroughly referenced. Now high-temperature property data can be found in one complete reference! Over 200 alloys are organized by AISI number into 11 major sections: Irons, Carbon Steels, Alloy Steels, ASTM Steels, Low Alloy Constructional Steels, Ultra High Strength Steels, Tool Steels, Maraging Steels, Wrought Stainless Steels, Heat Resistant Casting Alloys, and Wrought Iron-Nickel Alloys and Iron-Nickel Superalloys. Each alloy record lists the designation, specifications, UNS number composition product forms and a comment on the high-temperature properties and applications. Data is then given for physical properties such as density, specific heat, thermal conductivity, thermal expansion, electrical conductivity. Poisons ratio, moduli of elasticity and rigidity, etc. Mechanical properties follow, and include tensile properties, shearing and bearing properties, impact properties, creep, stress rupture and stress relaxation, and fatigue properties.The last part of the alloy record gives other effects of temperature, such as hot hardness, corrosion, and growth.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1995-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.
Download or read book High Temperature Alloys written by J.B. Marriott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in industrial technologies and improved performance of constructional materials are interdependent and have become of increasing concern in recent years. This Conference aimed to - provoke discussion of the limits towards which high temperature alloys properties can, ultimately, be developed, identify the resulting R&D requirements and design developments. Following a key-note paper concerning the relation of current capabilities to requirements for gas turbines the conference was structured into 3 sessions which examined: * the theoretical?ldpracticallimits for HT Alloys, * the potential for development in alloys and processing, * engineering considerations. Finally, feeling perhaps the approaching "wind of change"??1s Conference on remaining alloy potential was wound up with a paper entit1ed "The potential?ld problems ofEngineering Ceramics". The different sessions each included a number of invited papers followed by a series of posters and were concluded by a presentation of a "synthesis" by a sess10n rapporteur and general discussion. This structure is retained in the proceedings, including the discussion points in those cases where?le authors have provided written answers to questions raised.
Download or read book Commerce Today written by and published by . This book was released on 1971 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Entropy Alloys written by T.S. Srivatsan and published by CRC Press. This book was released on 2020-07-21 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a cohesive overview of innovations, advances in processing and characterization, and applications for high entropy alloys (HEAs) in performance-critical and non-performance-critical sectors. It covers manufacturing and processing, advanced characterization and analysis techniques, and evaluation of mechanical and physical properties. With chapters authored by a team of internationally renowned experts, the volume includes discussions on high entropy thermoelectric materials, corrosion and thermal behavior of HEAs, improving fracture resistance, fatigue properties and high tensile strength of HEAs, HEA films, and more. This work will be of interest to academics, scientists, engineers, technologists, and entrepreneurs working in the field of materials and metals development for advanced applications. Features Addresses a broad spectrum of HEAs and related aspects, including manufacturing, processing, characterization, and properties Emphasizes the application of HEAs Aimed at researchers, engineers, and scientists working to develop materials for advanced applications T.S. Srivatsan, PhD, Professor of Materials Science and Engineering in the Department of Mechanical Engineering at the University of Akron (Ohio, USA), earned his MS in Aerospace Engineering in 1981 and his PhD in Mechanical Engineering in 1984 from the Georgia Institute of Technology (USA). He has authored or edited 65 books, delivered over 200 technical presentations, and authored or co-authored more than 700 archival publications in journals, book chapters, book reviews, proceedings of conferences, and technical reports. His RG score is 45 with a h-index of 53 and Google Scholar citations of 9000, ranking him to be among the top 2% of researchers in the world. He is a Fellow of (i) the American Society for Materials International, (ii) the American Society of Mechanical Engineers, and (iii) the American Association for Advancement of Science. Manoj Gupta, PhD, is Associate Professor of Materials at NUS, Singapore. He is a former Head of Materials Division of the Mechanical Engineering Department and Director Designate of Materials Science and Engineering Initiative at NUS, Singapore. In August 2017, he was highlighted among the Top 1% Scientists of the World by the Universal Scientific Education and Research Network and in the Top 2.5% among scientists as per ResearchGate. In 2018, he was announced as World Academy Championship Winner in the area of Biomedical Sciences by the International Agency for Standards and Ratings. A multiple award winner, he actively collaborates/visits as an invited researcher and visiting and chair professor in Japan, France, Saudi Arabia, Qatar, China, the United States, and India.
Download or read book Technical Information Pilot written by and published by . This book was released on 1951 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Mechanical Properties of Copper and Selected Copper Alloys written by Richard Palmer Reed and published by . This book was released on 1967 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Index written by and published by . This book was released on 1971 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
