Download or read book Deposition Characterization and Tribological magnetic Studies of Diamond like Carbon and Magnetic Thin Films written by Geng Wang and published by . This book was released on 1997 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deposition Characterization and Tribological Studies on Carbon Overcoats for Magnetic Storage Disks written by Tse-an Yeh and published by . This book was released on 1993 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Characterization and Tribological Behavior of Diamond like Carbon and Nitrogen doped Diamond like Carbon Thin Films written by Krishna C. Kadiyala and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparative Surface and Nano tribological Characteristics of Nanocomposite Diamond like Carbon Thin Films Doped by Silver written by and published by . This book was released on 2008 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study we have deposited silver-containing hydrogenated and hydrogen-free diamond-like carbon (DLC) nanocomposite thin films by plasma immersion ion implantation-deposition methods. The surface and nano-tribological characteristics were studied by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and nano-scratching experiments. The silver doping was found to have no measurable effect on sp2-sp3 hybridization of the hydrogenated DLC matrix and only a slight effect on the hydrogen-free DLC matrix. The surface topography was analyzed by surface imaging. High- and low-order roughness determined by AFM characterization was correlated to the DLC growth mechanism and revealed the smoothing effect of silver. The nano-tribological characteristics were explained in terms of friction mechanisms and mechanical properties in correlation to the surface characteristics. It was discovered that the adhesion friction was the dominant friction mechanism; the adhesion force between the scratching tip and DLC surface was decreased by hydrogenation and increased by silver doping.
Download or read book Characterization of Diamond like Carbon Films and Their Application as Overcoats on Thin Film Media for Magnetic Recording written by Hsiao-chu Tsai and published by . This book was released on 1986 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-05-10 with total page 1530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume serves as a timely, practical introduction to the principles of nanotribology and nanomechanics and applications to magnetic storage systems and MEMS/NEMS. Assuming some familiarity with macrotribology/mechanics, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. Graduate students, research workers, and practicing engineers will find the book of value.
Download or read book Protective Coatings and Thin Films written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled "Protective Coatings and Thin Films : Synthesis, Characterization and Applications" contains the Proceedings of the NATO Advanced Research Workshop (ARW) held in Alvor, Portugal from May 30 to June 5, 1996. This NATO-ARW was an expert meeting on the surface protection and modification of solid materials subjected to interactions with the environment. The meeting attracted 10 key speakers, 40 contributing speakers and 3 observers from various countries. The existing knowledge and current status of the science and technology related to protective coatings and thin films were assessed through a series of oral presentations, key notes (titles underlined in the volume content) and contributed papers distributed over various sessions dealing with: (a) plasma-assisted physical and chemical vapor deposition processes to enhance wear and corrosion protection of materials, (b) low friction coatings operating in hostile environment (vacuum, space, extreme temperatures, . . . ), (c) polymer films for protection against mechanical damage and chemical attack, (d) characterization of the structure of films and correlations with mechanical properties, (e) wear and corrosion resistant thermal spray coatings, (f) functional gradient ceramic/metallic coatings produced by high energy laser beam and energetic deposition processes for high temperature applications, (g) protective coatings for optical systems, and (h) ion beam assisted deposition of coatings for protection of materials against aqueous corrosion.
Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.
Download or read book Synthesis of Silver diamond Like Carbon Thin Films by Magnetron Sputtering written by Venkatesh Majji and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond-like carbon thin films are been used in wide range of applications due to their attractive tribological properties. Metal-doped DLC films have significant properties which make them compatible to use in larger variety of applications. The present study examines the dispersion and their effect on various tribological properties when Ag is incorporated into the DLC thin films. These Ag-DLC nanocomposite films were synthesized by a hybrid CVD and magnetron sputtering process in a discharge composed of CH4, and Ar atmosphere. These DLC and Ag-DLC films were characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. Tribological tests were carried out to measure the frictional and wear behavior of the Ag-DLC films as a function of Ag content. The TEM cross sectional studies revealed that Ag is present as Ag nanoparticles that were distributed uniformly throughout an amorphous DLC matrix. XPS analysis confirmed that Ag in the nanoparticles was present in the metallic form. Increasing the Ag content in the film, reduced its sp3 content. The incorporation of these nanoparticles causes a reduction in hardness in Ag-DLC when compared with pure DLC films. Microhardness of DLC films exhibits values up to a maximum of 16 GPa and gradually decreases with increasing in Ag content. FTIR and Raman studies confirmed that the films contain a significant amount of hydrogen, and with an increase in the Ag content in the DLC film results in an increase in sp2 carbon content. Finally, the friction behavior of the Ag-DLC films showed a comparable performance with that of DLC films with a coefficient of friction as low as 0.1. The DLC films exhibited a lower wear rate of 5.51x10−8 mm3/Nm than Ag-DLC films. The wear rate in the Ag-DLC films gradually increased with increasing Ag content but it remained at low levels (i.e., up to 1.7x10−7 mm3/Nm). This is consistent with the higher sp2 content of the Ag-DLC films.
Download or read book Pulsed Laser Deposition of Thin Films written by Robert Eason and published by John Wiley & Sons. This book was released on 2007-12-14 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by major contributors to the field, this text summarizes current or newly emerging pulsed laser deposition application areas. It spans the field of optical devices, electronic materials, sensors and actuators, biomaterials, and organic polymers. Every scientist, technologist and development engineer who has a need to grow and pattern, to apply and use thin film materials will regard this book as a must-have resource.
Download or read book Advanced Tribology written by Jianbin Luo and published by Springer Science & Business Media. This book was released on 2010-07-16 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.
Download or read book Tribological Applications of Composite Materials written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-14 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the current advances and practices in tribological applications of composite materials under various processes, presenting the development, characterization, and morphological properties of composite materials in tribological applications. It covers a wide range of subjects, extending from fundamental research on the tribological characteristics of various multi-phase materials to the final applications of composites in wear loaded, technical components. It brings together contributions from researchers who discusses innovative experimental approaches and analytical techniques, creating a reference with comprehensive coverage of modern research techniques and the potential application of tribological composites in biomedical, aerospace, automotive, marines and construction industries. This volume will be of interest to material science researchers working in both industry and academia
Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2004-01-19 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.
Download or read book Tetrahedrally Bonded Amorphous Carbon Films I written by Bernd Schultrich and published by Springer. This book was released on 2018-03-10 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the status quo of the structure, preparation, properties and applications of tetrahedrally bonded amorphous carbon (ta-C) films and compares them with related film systems. Tetrahedrally bonded amorphous carbon films (ta-C) combine some of the outstanding properties of diamond with the versatility of amorphous materials. The book compares experimental results with the predictions of theoretical analyses, condensing them to practicable rules. It is strictly application oriented, emphasizing the exceptional potential of ta-C for tribological coatings of tools and components.
Download or read book Diamond like Carbon Films written by Yuto S. Tanaka and published by Nova Biomedical Books. This book was released on 2012-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research from across the globe in the study of diamond-like carbon films. Topics discussed include the peculiarities of ion-beam synthesis of carbon-based phases; electron field emission properties of non-metal and metal doped diamond like carbon; internal stress and its reduction of hydrogenated diamond-like carbon thin films deposited by plasma CVD methods; incorporating crystalline diamond particles in diamond-like carbon films to improve their properties and diamond-like carbon films applied as an alignment layer for LCDs.