Download or read book Dependability of Self Optimizing Mechatronic Systems written by Jürgen Gausemeier and published by Springer Science & Business Media. This book was released on 2014-01-23 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technical systems, which combine mechanical, electrical and software engineering with methods from control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. The Collaborative Research Center 614 "Self-optimizing concepts and structures in mechanical engineering" pursued the long-term aim to enable others to develop dependable self-optimizing systems. Assuring their dependability poses new challenges. However, self-optimization also offers the possibility to adapt the system's behavior to improve dependability during operation. The aim of this book is to provide methods and techniques to master the challenges and to exploit the possibilities given by self-optimization. The reader will be able to develop self-optimizing systems that fulfill and surpass today’s dependability requirements easily. This book is directed to researchers and practitioners alike. It gives a brief introduction to the holistic development approach for self-optimizing mechatronic systems and the steps required to assure a dependable product design starting with the very early conceptual design phase. A guideline to select suitable methods for each step and the methods themselves are included. Each method is individually introduced, many examples and full references are given.

Download or read book Self optimizing mechatronic systems written by Jürgen Gausemeier and published by . This book was released on 2008 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimization based Reliability Control of Mechatronic Systems written by Tobias Meyer and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability-adaptive systems allow an adaptation of system behavior based on current system reliability. They can extend their lifetime at the cost of lowered performance or vice versa. This can be used to adapt failure behavior according to a maintenance plan, thus increasing availability while using up system capability fully. To facilitate setup, a control algorithm independent of a degradation model is desired. A closed loop control technique for reliability based on a health index, a measure for system degradation, is introduced. It uses self-optimization as means to implement behavior adaptation. This is based on selecting the priorities of objectives that the system pursues. Possible working points are computed beforehand using model-based multiobjective optimization techniques. The controller selects the priorities of objectives and this way balances reliability and performance. As exemplary application, an automatically actuated single plate dry clutch is introduced. The entire reliability control is setup and lifetime experiments are conducted. Results show that the variance of time to failure is reduced greatly, making the failure behavior more predictable. At the same time, the desired usable lifetime can be extended at the cost of system performance to allow for changed maintenance intervals. Together, these possibilities allow for greater system usage and better planning of maintenance. ; eng

Download or read book Design Methodology for Intelligent Technical Systems written by Jürgen Gausemeier and published by Springer Science & Business Media. This book was released on 2014-01-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technical systems, which combine mechanical, electrical and software engineering with control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. Self-optimizing systems create high value for example in terms of energy and resource efficiency as well as reliability. The Collaborative Research Center 614 "Self-optimizing Concepts and Structures in Mechanical Engineering" pursued the long-term aim to open up the active paradigm of self-optimization for mechanical engineering and to enable others to develop self-optimizing systems. This book is directed to researchers and practitioners alike. It provides a design methodology for the development of self-optimizing systems consisting of a reference process, methods, and tools. The reference process is divided into two phases the domain-spanning conceptual design and the domain-specific design and development. For the conceptual design a holistic approach is provided. Domain-specific methods and tools developed especially for the design and development of self-optimizing systems are described and illustrated by application examples. This book will enable the reader to identify the potential for self-optimization and to develop self-optimizing systems independently.

Download or read book Material Integrated Intelligent Systems written by Stefan Bosse and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining different perspectives from materials science, engineering, and computer science, this reference provides a unified view of the various aspects necessary for the successful realization of intelligent systems. The editors and authors are from academia and research institutions with close ties to industry, and are thus able to offer first-hand information here. They adopt a unique, three-tiered approach such that readers can gain basic, intermediate, and advanced topical knowledge. The technology section of the book is divided into chapters covering the basics of sensor integration in materials, the challenges associated with this approach, data processing, evaluation, and validation, as well as methods for achieving an autonomous energy supply. The applications part then goes on to showcase typical scenarios where material-integrated intelligent systems are already in use, such as for structural health monitoring and smart textiles.

Download or read book Automated Technology for Verification and Analysis written by Doron A. Peled and published by Springer Science & Business Media. This book was released on 2005-09-19 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Automated Technology for Veri?cation and Analysis (ATVA) international symposium series was initiated in 2003, responding to a growing interest in formal veri?cation spurred by the booming IT industry, particularly hardware design and manufacturing in East Asia. Its purpose is to promote research on automated veri?cation and analysis in the region by providing a forum for int- action between the regional and the international research/industrial commu- ties of the ?eld. ATVA 2005, the third of the ATVA series, was held in Taipei, Taiwan, October 4–7, 2005. The main theme of the symposium encompasses - sign, complexities, tools, and applications of automated methods for veri?cation and analysis. The symposium was co-located and had a two-day overlap with FORTE 2005, which was held October 2–5, 2005. We received a total of 95 submissions from 17 countries. Each submission was assigned to three Program Committee members, who were helped by their subreviewers, for rigorous and fair evaluation. The ?nal deliberation by the P- gram Committee was conducted over email for a duration of about 10 days after nearly all review reports had been collected. In the end, 33 papers were - lectedforinclusionintheprogram.ATVA2005hadthreekeynotespeechesgiven respectively by Amir Pnueli (joint with FORTE 2005), Zohar Manna, and Wo- gang Thomas. The main symposium was preceded by a tutorial day, consisting of three two-hour lectures given also by the keynote speakers.

Download or read book Technological Innovation for Smart Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2017-04-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2017, held in Costa de Caparica, Portugal, in May 2017. The 46 revised full papers were carefully reviewed and selected from 95 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for smart systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks, computational intelligence, systems analysis, smart manufacturing systems, smart sensorial systems, embedded and real time systems, energy: management, energy: optimization, distributed infrastructure, solar energy, electrical machines, power electronics, and electronics.

Download or read book Interval Analysis written by Navid Razmjooy and published by John Wiley & Sons. This book was released on 2024-01-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interval Analysis An innovative and unique application of interval analysis to optimal control problems In Interval Analysis: Application in the Optimal Control Problems, celebrated researcher and engineer Dr. Navid Razmjooy delivers an expert discussion of the uncertainties in the analysis of optimal control problems. In the book, Dr. Razmjooy uses an open-ended approach to solving optimal control problems with indefinite intervals. Utilizing an extended, Runge-Kutta method, the author demonstrates how to accelerate its speed with the piecewise function. You’ll find recursive methods used to achieve more compact answers, as well as how to solve optimal control problems using the interval Chebyshev’s function. The book also contains: A thorough introduction to common errors and mistakes, generating uncertainties in physical models Comprehensive explorations of the literature on the subject, including Hukurara’s derivatives Practical discussions of the interval analysis and its variants, including the classical (Minkowski) methods Complete treatments of existing control methods, including classic, conventional advanced, and robust control. Perfect for master’s and PhD students working on system uncertainties, Interval Analysis: Application in the Optimal Control Problems will also benefit researchers working in laboratories, universities, and research centers.

Download or read book Safety and Reliability of Complex Engineered Systems written by Luca Podofillini and published by CRC Press. This book was released on 2015-09-03 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability of Complex Engineered Systems contains the Proceedings of the 25th European Safety and Reliability Conference, ESREL 2015, held 7-10 September 2015 in Zurich, Switzerland. It includes about 570 papers accepted for presentation at the conference. These contributions focus on theories and methods in the area of risk, safety and

Download or read book Parallel Processing and Applied Mathematics written by Roman Wyrzykowski and published by Springer Science & Business Media. This book was released on 2006-05-17 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the 6th International Conference on Parallel Processing and Applied Mathematics - PPAM 2005, which was held in Poznan, the industrial, academic and cultural center in the western part of Poland, during September 11–14, 2005.

Download or read book Architecting Dependable Systems V written by Rogério de Lemos and published by Springer Science & Business Media. This book was released on 2008-08-28 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This survey contains expanded and peer-reviewed papers based on the selected contributions to the Workshop on Architecting Dependable Systems (WADS 2007), and the Third Workshop on the Role of Software Architecture for Testing and Analysis (ROSATEA 2007).

Download or read book Dependable IoT for Human and Industry written by Vyacheslav Kharchenko and published by CRC Press. This book was released on 2022-09-01 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are numerous publications which introduce and discuss the Internet of Things (IoT). In the midst of these, this work has several unique characteristics which should change the reader’s perspective, and in particular, provide a more profound understanding of the impact of the IoT on society. Dependable IoT for Human and Industry covers the main aspects of Internet of Things and IoT based systems such as global issues of applications, modeling, development and implementation of dependable IoT for different human and industry domains. Technical topics discussed in the book include:  Introduction in Internet of vital and trust Things Modelling and assessment techniques for dependable and secure IoT systems Architecting and development of IoT systems Implementation of IoT for smart cities and drone fleets; business and blockchain, transport and industry Training courses and education experience on Internet and Web of ThingThe book contains chapters which have their roots in the International Conference IDAACS 2017, and Workshop on Cyber Physical Systems and IoT Dependability CyberIoT-DESSERT 2017.

Download or read book Advanced Information Systems Engineering Workshops written by John Krogstie and published by Springer. This book was released on 2016-06-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of five international workshops held in Ljubljana, Slovenia, in conjunction with the 28th International Conference on Advanced Information Systems Engineering, CAiSE 2016, in June 2016. The 16 full and 9 short papers were carefully selected from 51 submissions. The associated workshops were the Third International Workshop on Advances in Services DEsign based on the Notion of CApabiliy (ASDENCA) co-arranged with the First International Workshop on Business Model Dynamics and Information Systems Engineering (BumDISE), the Fourth International Workshop on Cognitive Aspects of Information Systems Engineering (COGNISE), the First International Workshop on Energy-awareness and Big Data Management in Information Systems (EnBIS), the Second International Workshop on Enterprise Modeling (EM), and the Sixth International Workshop on Information Systems Security Engineering (WISSE).

Download or read book Risk Reliability and Safety Innovating Theory and Practice written by Lesley Walls and published by CRC Press. This book was released on 2016-11-25 with total page 4767 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable performance of many systems with which we interact daily has been achieved through the analysis and management of risk. From complex infrastructures to consumer durables, from engineering systems and technologies used in transportation, health, energy, chemical, oil, gas, aerospace, maritime, defence and other sectors, the management of risk during design, manufacture, operation and decommissioning is vital. Methods and models to support risk-informed decision-making are well established but are continually challenged by technology innovations, increasing interdependencies, and changes in societal expectations. Risk, Reliability and Safety contains papers describing innovations in theory and practice contributed to the scientific programme of the European Safety and Reliability conference (ESREL 2016), held at the University of Strathclyde in Glasgow, Scotland (25—29 September 2016). Authors include scientists, academics, practitioners, regulators and other key individuals with expertise and experience relevant to specific areas. Papers include domain specific applications as well as general modelling methods. Papers cover evaluation of contemporary solutions, exploration of future challenges, and exposition of concepts, methods and processes. Topics include human factors, occupational health and safety, dynamic and systems reliability modelling, maintenance optimisation, uncertainty analysis, resilience assessment, risk and crisis management.

Download or read book Computer Safety Reliability and Security written by Maritta Heisel and published by Springer Science & Business Media. This book was released on 2004-09-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theimportanceofsafetyandsecurityisgrowingsteadily.Safetyisaqualityc- racteristic that traditionally has been considered to be important in embedded systems, and security is usually an essential property in business applications. There is certainly a tendency to use software-based solutions in safety-critical applications domains, which increases the importance of safety engineering te- niques. These include modelling and analysis techniques as well as appropriate processes and tools. And it is surely correct that the amount of con?dential data that require protection from unauthorized access is growing. Therefore, security is very important. On the one hand, the traditional motivations for addressing safety and security still exist, and their relevance has improved. On the other hand, safety and security requirements occur increasingly in the same system. At present, many software-based systems interact with technical equipment and they communicate, e.g., with users and other systems. Future systems will more and more interact with many other entities (technical systems, people, the en- ronment). In this situation, security problems may cause safety-related failures. It is thus necessary to address safety and security. It is furthermore required to take into account the interactions between these two properties.

Download or read book Self optimizing Mechatronic Systems Designe the Future written by Jürgen Gausemeier and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Software Engineering for Self Adaptive Systems written by Betty H. C. Cheng and published by Springer Science & Business Media. This book was released on 2009-06-19 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The carefully reviewed papers in this state-of-the-art survey describe a wide range of approaches coming from different strands of software engineering, and look forward to future challenges facing this ever-resurgent and exacting field of research.