Download or read book Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu InxGa1 x Se2 Photovoltaics written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu InxGa1 x Se2 Photovoltaics written by and published by . This book was released on 2011 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure pAr, was varied in the range of 6 - 20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions of the Mo films were strongly dependent on pAr, indicating a consistent and significant decrease in the Mo film density pMo with increasing pAr. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. Dielectric functions of Mo were then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(InxGa1-x)Se2 (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for process monitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using dielectric functions deduced from SE.
Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.
Download or read book Micro and Nanomanufacturing written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2007-06-19 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This, the corrected second printing of Jackson’s authoritative volume on the subject, provides a comprehensive treatment of established micro and nanofabrication techniques. It addresses the needs of practicing manufacturing engineers by applying established and research laboratory manufacturing techniques to a wide variety of materials. Nanofabrication and nanotechnology present a great challenge to engineers and researchers as they manipulate atoms and molecules to produce single artifacts and submicron components and systems. The book provides up-to-date information on a number of subjects of interest to engineers who are seeking more knowledge of how nano and micro devices are designed and fabricated. They will learn about manufacturing and fabrication techniques at the micro and nanoscales; using bulk and surface micromachining techniques, and LiGA, and deep x-ray lithography to manufacture semiconductors. Also covered are subjects including producing master molds with micromachining, the deposition of thin films, pulsed water drop machining, and nanomachining.
Download or read book Solar Energy written by Arno Smets and published by Bloomsbury Publishing. This book was released on 2016-01-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad overview on the different aspects of solar energy, with a focus on photovoltaics, which is the technology that allows light energy to be converted into electric energy. Renewable energy sources have become increasingly popular in recent years, and solar is one of the most adaptable and attractive types – from solar farms to support the National Grid to roof panels/tiles used for solar thermal heating systems, and small solar garden lights. Written by Delft University researchers, Solar Energy uniquely covers both the physics of photovoltaic (PV) cells and the design of PV systems for real-life applications, from a concise history of solar cells components and location issues of current systems. The book is designed to make this complicated subject accessible to all, and is packed with fascinating graphs and charts, as well as useful exercises to cement the topics covered in each chapter. Solar Energy outlines the fundamental principles of semiconductor solar cells, as well as PV technology: crystalline silicon solar cells, thin-film cells, PV modules, and third-generation concepts. There is also background on PV systems, from simple stand-alone to complex systems connected to the grid. This is an invaluable reference for physics students, researchers, industrial engineers and designers working in solar energy generation, as well those with a general interest in renewable energy.
Download or read book A Comprehensive Guide to Solar Energy Systems written by Trevor Letcher and published by Academic Press. This book was released on 2018-05-17 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Guide to Solar Energy Systems: With Special Focus on Photovoltaic Systems, the most advanced and research focused text on all aspects of solar energy engineering, is a must have edition on the present state of solar technology, integration and worldwide distribution. In addition, the book provides a high-level assessment of the growth trends in photovoltaics and how investment, planning and economic infrastructure can support those innovations. Each chapter includes a research overview with a detailed analysis and new case studies that look at how recent research developments can be applied. Written by some of the most forward-thinking professionals, this book is an invaluable reference for engineers. - Contains analysis of the latest high-level research and explores real world application potential in relation to developments - Uses system international (SI) units and imperial units throughout to appeal to global engineers - Offers measurable data written by a world expert in the field on the latest developments in this fast moving and vital subject
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book Thermionic Electron Sources written by George A. Haas and published by . This book was released on 1961 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of the emission characteristics of modern thermionic electron sources is presented. In addition to a discussion of recent advances among the more commonly used emitters such as oxide cathodes, thoriated cathodes, and metal c thodes, a tabulation of the thermionic properties of over one hundred various new matrix and refractory-coated cathodes is given. (Author).
Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.
Download or read book Compound Semiconductor Photonics written by Chua Soo-Jin and published by CRC Press. This book was released on 2020-03-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding is a collection of selected papers presented at Symposium O of Compound Semiconductor Photonics in the International Conference on Materials for Advanced Technology (ICMAT), which was held in Singapore from 28 June to 3 July 2009. The symposium covers a wide range of topics from fundamental semiconductor materials study to photonic device fabrication and application. The papers collected are of recent progress in the active and wide range of semiconductor photonics research. They include materials-related papers on III-As/P, III-nitride, quantum dot/wire/dash growth, ZnO, and chalcogenide, and devices-related papers on photonic crystals, VCSEL, quantum dot/dash lasers, LEDs, waveguides, solar cells and heterogeneous integrat
Download or read book Semiconductor Electrodes written by Harry O. Finklea and published by Elsevier Publishing Company. This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors have been studied as electrodes in electrochemical systems since the mid-1950's. However, it was not until the 1970's that the search for alternative energy sources, especially solar energy, led to an enormous expansion in semiconductor electrode research. One attractive option for solar energy conversion is the semiconductor liquid-junction solar cell, which can be designed to produce either electrical power or fuel such as hydrogen. Consequently the number of papers published concerning semiconductor electrodes has rapidly increased. Previous books have principally focused on the underlying theory (largely from solid state physics) and principles of operation of all semiconductor electrodes. It therefore seemed both useful and appropriate to review the field with the intention of collating information for each semiconductor or family of semiconductors, with contributions from authors who are all recognized experts in their field. Each chapter is devoted to critically assessing the recent literature on a particular semiconductor or family of semiconductors.
Download or read book 2016 IEEE 43rd Photovoltaic Specialists Conference PVSC written by IEEE Staff and published by . This book was released on 2016-06-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: scientific and engineering technical conference covering all aspects of photovoltaics materials, devices, systems and reliability
Download or read book Cu In1 xGax Se2 Based Thin Film Solar Cells written by Subba Ramaiah Kodigala and published by Academic Press. This book was released on 2011-01-03 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cu(In1-xGax)Se2 Based Thin Film Solar Cells provides valuable contents about the fabrication and characterization of chalcopyrite Cu(In1-xGax)Se2 based thin film solar cells and modules. The growth of chalcopyrite Cu(In1-xGax)(S1-ySey)2 absorbers, buffers, window layers, antireflection coatings, and finally metallic grids, which are the sole components of solar cells, is clearly illustrated. The absorber, which contains multiple elements, segregates secondary phases if the growth conditions are not well optimized i.e., the main drawback in the fabrication of solar cells. More importantly the solutions for the growth of thin films are given in detail. The properties of all the individual layers and single crystals including solar cells analyzed by different characterization techniques such as SEM, AFM, XPS, AES, TEM, XRD, optical, photoluminescence, and Raman spectroscopy are explicitly demonstrated. The electrical analyses such as conductivities, Hall mobilities, deep level transient spectroscopy measurements etc., provide a broad picture to understand thin films or single crystals and their solar cells. The book clearly explains the working principle of energy conversion from solar to electrical with basic sciences for the chalcopyrite based thin film solar cells. Also, it demonstrates important criteria on how to enhance efficiency of the solar cells and modules. The effect of environmental factors such as temperature, humidity, aging etc., on the devices is mentioned by citing several examples. - Illustrates a number of growth techniques to prepare thin film layers for solar cells - Discusses characterization techniques such as XRD, TEM, XPS, AFM, SEM, PL, CL, Optical measurements, and Electrical measurements - Includes I-V, C-V measurements illustrations - Provides analysis of solar cell efficiency - Presents current trends in thin film solar cells research and marketing
Download or read book Wide Bandgap Semiconductors written by Kiyoshi Takahashi and published by Springer Science & Business Media. This book was released on 2007-04-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the development, current state, and future prospects of wide bandgap semiconductor materials and related optoelectronics devices. With 901 references, 333 figures and 21 tables, this book will serve as a one-stop source of knowledge on wide bandgap semiconductors and related optoelectronics devices.
Download or read book Applied Photovoltaics written by Stuart R. Wenham and published by Routledge. This book was released on 2013-01-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this thoroughly considered textbook provides a reliable, accessible and comprehensive guide for students of photovoltaic applications and renewable energy engineering. Written by a group of award-winning authors it is brimming with information and is carefully designed to meet the needs of its readers. Along with exercises and references at the end of each chapter, it features a set of detailed technical appendices that provide essential equations, data sources and standards. The new edition has been fully updated with the latest information on photovoltaic cells, modules, applications and policy. Starting from basics with 'The Characteristics of Sunlight' the reader is guided step-by-step through semiconductors and p-n junctions; the behaviour of solar cells; cell properties and design; and PV cell interconnection and module fabrication. The book covers stand-alone photovoltaic systems; specific purpose photovoltaic systems; remote area power supply systems; grid-connected photovoltaic systems and water pumping. Applied Photovoltaics is highly illustrated and very accessible, providing the reader with all the information needed to start working with photovoltaics.
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Download or read book Handbook of Transparent Conductors written by David S. Ginley and published by Springer Science & Business Media. This book was released on 2010-09-11 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting materials are key elements in a wide variety of current technologies including flat panel displays, photovoltaics, organic, low-e windows and electrochromics. The needs for new and improved materials is pressing, because the existing materials do not have the performance levels to meet the ever- increasing demand, and because some of the current materials used may not be viable in the future. In addition, the field of transparent conductors has gone through dramatic changes in the last 5-7 years with new materials being identified, new applications and new people in the field. “Handbook of Transparent Conductors” presents transparent conductors in a historical perspective, provides current applications as well as insights into the future of the devices. It is a comprehensive reference, and represents the most current resource on the subject.
