EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Densification and Crystallization of Zirconia Thin Films Prepared by Sol gel Processing

Download or read book Densification and Crystallization of Zirconia Thin Films Prepared by Sol gel Processing written by and published by . This book was released on 1993 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have investigated the effects of precursor nature and heat treatment schedule on the densification and crystallization behavior of sol-gel derived zirconia thin films. Precursor solutions were prepared from n-propanol, zirconium (IV) n-propoxide, and either acetic acid, or 2,4-pentanedione (acac) and water additions. By controlling the ligand type and ligand-to-metal ratio, we were able to prepare films which displayed significant differences in densification behavior. We attribute the dissimilarity in densification to variations in the nature of the as-deposited films, as influenced by ligand type and concentration. While the acac- derived film was a physical gel, (i.e., a physical aggregation of the oligomeric species), the acetic acid-derived film, which exhibited less consolidation, was a chemical gel that could not be redissolved in the parent solvent. Films prepared with large acac/metal ratios and small water additions exhibited minimal crosslinking at 25°C, displayed the greatest consolidation ((approximately)86% shrinkage) and the highest refractive index (n = 2.071) when heat treated. These results indicate the importance that M-O-M bonds (crosslinks) formed at low temperature can have on densification behavior. We also report on the effects of heat-treatment schedules and ramp rates on densification behavior. All of the films of the present study crystallized into the cubic phase, at temperatures ranging from (approximately)400°C to greater than 700°C, depending on the heating rate.

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Ion Beam Irradiation of Sol gel Zirconia Thin Films

Download or read book Ion Beam Irradiation of Sol gel Zirconia Thin Films written by Timothy Edge Levine and published by . This book was released on 1996 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Solution Processing of Inorganic Materials

Download or read book Solution Processing of Inorganic Materials written by David Mitzi and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the materials set to revolutionize the electronics industry The search for electronic materials that can be cheaply solution-processed into films, while simultaneously providing quality device characteristics, represents a major challenge for materials scientists. Continuous semiconducting thin films with large carrier mobilities are particularly desirable for high-speed microelectronic applications, potentially providing new opportunities for the development of low-cost, large-area, flexible computing devices, displays, sensors, and solar cells. To date, the majority of solution-processing research has focused on molecular and polymeric organic films. In contrast, this book reviews recent achievements in the search for solution-processed inorganic semiconductors and other critical electronic components. These components offer the potential for better performance and more robust thermal and mechanical stability than comparable organic-based systems. Solution Processing of Inorganic Materials covers everything from the more traditional fields of sol-gel processing and chemical bath deposition to the cutting-edge use of nanomaterials in thin-film deposition. In particular, the book focuses on materials and techniques that are compatible with high-throughput, low-cost, and low-temperature deposition processes such as spin coating, dip coating, printing, and stamping. Throughout the text, illustrations and examples of applications are provided to help the reader fully appreciate the concepts and opportunities involved in this exciting field. In addition to presenting the state-of-the-art research, the book offers extensive background material. As a result, any researcher involved or interested in electronic device fabrication can turn to this book to become fully versed in the solution-processed inorganic materials that are set to revolutionize the electronics industry.

Book 19th Annual Conference on Composites  Advanced Ceramics  Materials  and Structures   B  Volume 16  Issue 5

Download or read book 19th Annual Conference on Composites Advanced Ceramics Materials and Structures B Volume 16 Issue 5 written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Book Ion irradiation induced Densification of Zirconia Sol gel Thin Films

Download or read book Ion irradiation induced Densification of Zirconia Sol gel Thin Films written by and published by . This book was released on 1994 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have investigated the densification behavior of sol-gel zirconia films resulting from ion irradiation. Three sets of films were implanted with neon, krypton, or xenon. The ion energies were chosen to yield approximately constant energy loss through the film and the doses were chosen to yield similar nuclear energy deposition. Ion irradiation of the sol-gel films resulted in carbon and hydrogen loss as indicated by Rutherford backscattering spectrometry and forward recoil energy spectroscopy. Although the densification was hypothesized to result from target atom displacement, the observed densification exhibits a stronger dependence on electronic energy deposition.

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Handbook of Sol Gel Science and Technology

Download or read book Handbook of Sol Gel Science and Technology written by Lisa Klein and published by Springer Nature. This book was released on 2018-05-31 with total page 3755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and expanded second edition stands as a comprehensive knowledgebase on both the fundamentals and applications of this important materials processing method. The diverse, international team of contributing authors of this reference clarify in extensive detail properties and applications of sol-gel science and technology as it pertains to the production of substances, active and non-active, including optical, electronic, chemical, sensor, bio- and structural materials. Essential to a wide range of manufacturing industries, the compilation divides into the three complementary sections: Sol-Gel Processing, devoted to general aspects of processing and recently developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, and photocatalysts; Characterization of Sol-Gel Materials and Products, presenting contributions that highlight the notion that useful materials are only produced when characterization is tied to processing, such as determination of structure by NMR, in-situ characterization of the sol-gel reaction process, determination of microstructure of oxide gels, characterization of porous structure of gels by the surface measurements, and characterization of organic-inorganic hybrid; and Applications of Sol-Gel Technology, covering applications such as the sol-gel method used in processing of bulk silica glasses, bulk porous gels prepared by sol-gel method, application of sol-gel method to fabrication of glass and ceramic fibers, reflective and antireflective coating films, application of sol-gel method to formation of photocatalytic coating films, and application of sol-gel method to bioactive coating films. The comprehensive scope and integrated treatment of topics make this reference volume ideal for R&D scientists and engineers across a wide range of disciplines and professional interests.

Book Intermetallic and Ceramic Coatings

Download or read book Intermetallic and Ceramic Coatings written by Narnedra B. Dahotre and published by CRC Press. This book was released on 1999-02-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing the properties of specific coatings, problems related to adhesion onto various substrates, and potential commercial applications, this text surveys up-to-date techniques involved in preparing intermetallic and ceramic coatings. The book features a list of selected applications covering the latest industrially available practices.

Book Handbook of sol gel science and technology  1  Sol gel processing

Download or read book Handbook of sol gel science and technology 1 Sol gel processing written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:

Book Chemical Solution Deposition of Functional Oxide Thin Films

Download or read book Chemical Solution Deposition of Functional Oxide Thin Films written by Theodor Schneller and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.

Book In Situ Ion beam Analysis and Modification of Sol gel Zirconia Thin Films

Download or read book In Situ Ion beam Analysis and Modification of Sol gel Zirconia Thin Films written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Photoenergy and Thin Film Materials

Download or read book Photoenergy and Thin Film Materials written by Xiao-Yu Yang and published by John Wiley & Sons. This book was released on 2019-03-19 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest research & developments and future trends in photoenergy and thin film materials—two important areas that have the potential to spearhead the future of the industry. Photoenergy materials are expected to be a next generation class of materials to provide secure, safe, sustainable and affordable energy. Photoenergy devices are known to convert the sunlight into electricity. These types of devices are simple in design with a major advantage as they are stand-alone systems able to provide megawatts of power. They have been applied as a power source for solar home systems, remote buildings, water pumping, megawatt scale power plants, satellites, communications, and space vehicles. With such a list of enormous applications, the demand for photoenergy devices is growing every year. On the other hand, thin films coating, which can be defined as the barriers of surface science, the fields of materials science and applied physics are progressing as a unified discipline of scientific industry. A thin film can be termed as a very fine, or thin layer of material coated on a particular surface, that can be in the range of a nanometer in thickness to several micrometers in size. Thin films are applied in numerous areas ranging from protection purposes to electronic semiconductor devices. The 16 chapters in this volume, all written by subject matter experts, demonstrate the claim that both photoenergy and thin film materials have the potential to be the future of industry.

Book Sol Gel Technologies for Glass Producers and Users

Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Book Sol Gel Optics

Download or read book Sol Gel Optics written by Lisa C. Klein and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol--Gel--Optics encompasses numerous schemes for fabricating optical materials from gels -- materials such as bulk optics, optical waveguides, doped oxides for laser and nonlinear optics, gradient refractive index (GRIN) optics, chemical sensors, environmental sensors, and `smart' windows. Sol--Gel--Optics: Processing and Applications provides in-depth coverage of the synthesis and fabrication of these materials and discusses the optics related to microporous, amorphous, crystalline and composite materials. The reader will also find in this book detailed descriptions of new developments in silica optics, bulk optics, waveguides and thin films. Various applications to sensor and device technology are highlighted. For researchers and students looking for novel optical materials, processing methods or device ideas, Sol--Gel--Optics: Processing and Applications surveys a wide array of promising new avenues for further investigation and for innovative applications. (This book is the first in a new subseries entitled `Electronic Materials: Science and Technology).

Book Introduction to Sol Gel Processing

Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Nature. This book was released on 2020-03-10 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.