Download or read book Continuous Time Sigma Delta Modulation for A D Conversion in Radio Receivers written by Lucien Breems and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the design and theory of continuous-time sigma-delta modulators for analogue-to-digital conversion in radio receivers. The book's main focus is on dynamic range, linearity and power efficiency aspects of sigma-delta modulators, which are very important requirements for use in battery operated receivers.
Download or read book Oversampled Delta Sigma Modulators written by Mücahit Kozak and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oversampled Delta-Sigma Modulators: Analysis, Applications, and Novel Topologies presents theorems and their mathematical proofs for the exact analysis of the quantization noise in delta-sigma modulators. Extensive mathematical equations are included throughout the book to analyze both single-stage and multi-stage architectures. It has been proved that appropriately set initial conditions generate tone free output, provided that the modulator order is at least three. These results are applied to the design of a Fractional-N PLL frequency synthesizer to produce spurious free RF waveforms. Furthermore, the book also presents time-interleaved topologies to increase the conversion bandwidth of delta-sigma modulators. The topologies have been generalized for any interleaving number and modulator order. The book is full of design and analysis techniques and contains sufficient detail that enables readers with little background in the subject to easily follow the material in it.
Download or read book Continuous Time Delta Sigma Modulators for High Speed A D Conversion written by James A. Cherry and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among analog-to-digital converters, the delta-sigma modulator has cornered the market on high to very high resolution converters at moderate speeds, with typical applications such as digital audio and instrumentation. Interest has recently increased in delta-sigma circuits built with a continuous-time loop filter rather than the more common switched-capacitor approach. Continuous-time delta-sigma modulators offer less noisy virtual ground nodes at the input, inherent protection against signal aliasing, and the potential to use a physical rather than an electrical integrator in the first stage for novel applications like accelerometers and magnetic flux sensors. More significantly, they relax settling time restrictions so that modulator clock rates can be raised. This opens the possibility of wideband (1 MHz or more) converters, possibly for use in radio applications at an intermediate frequency so that one or more stages of mixing might be done in the digital domain. Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion: Theory, Practice and Fundamental Performance Limits covers all aspects of continuous-time delta-sigma modulator design, with particular emphasis on design for high clock speeds. The authors explain the ideal design of such modulators in terms of the well-understood discrete-time modulator design problem and provide design examples in Matlab. They also cover commonly-encountered non-idealities in continuous-time modulators and how they degrade performance, plus a wealth of material on the main problems (feedback path delays, clock jitter, and quantizer metastability) in very high-speed designs and how to avoid them. They also give a concrete design procedure for a real high-speed circuit which illustrates the tradeoffs in the selection of key parameters. Detailed circuit diagrams, simulation results and test results for an integrated continuous-time 4 GHz band-pass modulator for A/D conversion of 1 GHz analog signals are also presented. Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion: Theory, Practice and Fundamental Performance Limits concludes with some promising modulator architectures and a list of the challenges that remain in this exciting field.
Download or read book Delta Sigma Data Converters written by Steven R. Norsworthy and published by Wiley-IEEE Press. This book was released on 1997 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive guide offers a detailed treatment of the analysis, design, simulation and testing of the full range of today's leading delta-sigma data converters. Written by professionals experienced in all practical aspects of delta-sigma modulator design, Delta-Sigma Data Converters provides comprehensive coverage of low and high-order single-bit, bandpass, continuous-time, multi-stage modulators as well as advanced topics, including idle-channel tones, stability, decimation and interpolation filter design, and simulation.
Download or read book Top Down Design of High Performance Sigma Delta Modulators written by Fernando Medeiro and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest for :I:~ modulation-based NO converters has significantly increased in the last years. The reason for that is twofold. On the one hand, unlike other converters that need accurate building blocks to obtain high res olution, :I:~ converters show low sensitivity to the imperfections of their building blocks. This is achieved through extensive use of digital signal pro cessing - a desirable feature regarding the implementation of NO interfaces in mainstream CMOS technologies which are better suited for implementing fast, dense, digital circuits than accurate analog circuits. On the other hand, the number of applications with industrial interest has also grown. In fact, starting from the earliest in the audio band, today we can find :I:~ converters in a large variety of NO interfaces, ranging from instrumentation to commu nications. These advances have been supported by a number of research works that have lead to a considerably large amount of published papers and books cov ering different sub-topics: from purely theoretical aspects to architecture and circuit optimization. However, so much material is often difficultly digested by those unexperienced designers who have been committed to developing a :I:~ converter, mainly because there is a lack of methodology. In our view, a clear methodology is necessary in :I:~ modulator design because all related tasks are rather hard.
Download or read book Continuous Time Sigma Delta Modulation for IF A D Conversion in Radio Receivers written by L. J. Breems and published by Delft University Press. This book was released on 2001-01-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed and Wide Bandwidth Delta Sigma ADCs written by Muhammed Bolatkale and published by Springer. This book was released on 2014-05-27 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques for realizing wide bandwidth (125MHz) over-sampled analog-to-digital converters (ADCs) in nano meter-CMOS processes. The authors offer a clear and complete picture of system level challenges and practical design solutions in high-speed Delta-Sigma modulators. Readers will be enabled to implement ADCs as continuous-time delta-sigma (CT∆Σ) modulators, offering simple resistive inputs, which do not require the use of power-hungry input buffers, as well as offering inherent anti-aliasing, which simplifies system integration. The authors focus on the design of high speed and wide-bandwidth ΔΣMs that make a step in bandwidth range which was previously only possible with Nyquist converters. More specifically, this book describes the stability, power efficiency and linearity limits of ΔΣMs, aiming at a GHz sampling frequency.
Download or read book Look Ahead Based Sigma Delta Modulation written by Erwin Janssen and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to expand and improve upon the existing knowledge on discrete-time 1-bit look-ahead sigma-delta modulation in general, and to come to a solution for the above mentioned specific issues arising from 1-bit sigma-delta modulation for SA-CD. In order to achieve this objective an analysis is made of the possibilities for improving the performance of digital noise-shaping look-ahead solutions. On the basis of the insights obtained from the analysis, several novel generic 1-bit look-ahead solutions that improve upon the state-of-the-art will be derived and their performance will be evaluated and compared. Finally, all the insights are combined with the knowledge of the SA-CD lossless data compression algorithm to come to a specifically for SA-CD optimized look-ahead design.
Download or read book Design and Implementation of Sigma Delta Modulators M for Class D Audio Amplifiers using Differential Pairs written by Nuno Pereira and published by Springer. This book was released on 2014-12-01 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the design of a 3rd Order CT-ΣΔM where the integrator stages of the filter are implemented with Bipolar-Junction Transistors (BJT) differential pairs. These circuits are fully analyzed and the design method is carefully explained. The design method is validated through experimental measurements of several prototype circuits.
Download or read book Entrefases de modulaci n sigma delta para CI s CMOS de se al mixta written by and published by . This book was released on 1997 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanometer CMOS Sigma Delta Modulators for Software Defined Radio written by Alonso Morgado and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative solutions for the implementation of Sigma-Delta Modulation (SDM) based Analog-to-Digital Conversion (ADC), required for the next generation of wireless hand-held terminals. These devices will be based on the so-called multi-standard transceiver chipsets, integrated in nanometer CMOS technologies. One of the most challenging and critical parts in such transceivers is the analog-digital interface, because of the assorted signal bandwidths and dynamic ranges that can be required to handle the A/D conversion for several operation modes. This book describes new adaptive and reconfigurable SDM ADC topologies, circuit strategies and synthesis methods, specially suited for multi-standard wireless telecom systems and future Software-defined-radios (SDRs) integrated in nanoscale CMOS. It is a practical book, going from basic concepts to the frontiers of SDM architectures and circuit implementations, which are explained in a didactical and systematic way. It gives a comprehensive overview of the state-of-the-art performance, challenges and practical solutions, providing the necessary insight to implement successful design, through an efficient design and synthesis methodology. Readers will learn a number of practical skills – from system-level design to experimental measurements and testing.
Download or read book Robust Sigma Delta Converters written by Robert H.M. van Veldhoven and published by Springer Science & Business Media. This book was released on 2011-01-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sigma Delta converters are a very popular choice for the A/D converter in multi-standard, mobile and cellular receivers. Key A/D converter specifications are high dynamic range, robustness, scalability, low-power and low EMI. Robust Sigma Delta Converters presents a requirement derivation of a Sigma Delta modulator applied in a receiver for cellular and connectivity, and shows trade-offs between RF and ADC. The book proposes to categorize these requirements in 5 quality indicators which can be used to qualify a system, namely accuracy, robustness, flexibility, efficiency and emission. In the book these quality indicators are used to categorize Sigma Delta converter theory. A few highlights on each of these quality indicators are; Quality indicators: provide a means to quantify system quality. Accuracy: introduction of new Sigma Delta Modulator architectures. Robustness: a significant extension on clock jitter theory based on phase and error amplitude error models. Extension of the theory describing aliasing in Sigma Delta converters for different types of DACs in the feedback loop. Flexibility: introduction of a Sigma Delta converter bandwidth scaling theory leading to very flexible Sigma Delta converters. Efficiency: introduction of new Figure-of-Merits which better reflect performance-power trade-offs. Emission: analysis of Sigma Delta modulators on emission is not part of the book The quality indicators also reveal that, to exploit nowadays advanced IC technologies, things should be done as much as possible digital up to a limit where system optimization allows reducing system margins. At the end of the book Sigma Delta converter implementations are shown which are digitized on application-, architecture-, circuit- and layout-level. Robust Sigma Delta Converters is written under the assumption that the reader has some background in receivers and in A/D conversion.
Download or read book Top Down Design of High Performance Sigma Delta Modulators written by Fernando Medeiro and published by Springer. This book was released on 2013-01-11 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest for :I:~ modulation-based NO converters has significantly increased in the last years. The reason for that is twofold. On the one hand, unlike other converters that need accurate building blocks to obtain high res olution, :I:~ converters show low sensitivity to the imperfections of their building blocks. This is achieved through extensive use of digital signal pro cessing - a desirable feature regarding the implementation of NO interfaces in mainstream CMOS technologies which are better suited for implementing fast, dense, digital circuits than accurate analog circuits. On the other hand, the number of applications with industrial interest has also grown. In fact, starting from the earliest in the audio band, today we can find :I:~ converters in a large variety of NO interfaces, ranging from instrumentation to commu nications. These advances have been supported by a number of research works that have lead to a considerably large amount of published papers and books cov ering different sub-topics: from purely theoretical aspects to architecture and circuit optimization. However, so much material is often difficultly digested by those unexperienced designers who have been committed to developing a :I:~ converter, mainly because there is a lack of methodology. In our view, a clear methodology is necessary in :I:~ modulator design because all related tasks are rather hard.
Download or read book Estudio y simulaci n de un sistema de codificaci n A D y D A mediante la modulaci n delta written by Sergio Laborda Oribes and published by . This book was released on 1995 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Delta Modulation Systems written by Raymond Steele and published by John Wiley & Sons. This book was released on 1975 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Delta Sigma Modulators written by George I. Bourdopoulos and published by Imperial College Press. This book was released on 2003 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book deals with the modeling and design of higher-order single-stage delta-sigma modulators. It provides an overview of the architectures, the quantizer models, the design techniques and the implementation issues encountered in the study of the delta-sigma modulators. A number of applications are discussed, with emphasis on use in the design of analog-to-digital converters and in frequency synthesis. The book is education- rather than research-oriented, containing numerical examples and unsolved problems. It is aimed at introducing the final-year undergraduate, the graduate student or the electronic engineer to this field. Contents: Analog to Digital Conversion; ou Modulators OCo Architectures; Single-Bit Single-Stage ou Modulators, Modeling and Design; Implementation of ou Modulators; Practical Limitations of ou Modulators; Stabilization and Suppression of Tones for the Higher-Order Single-Stage ou Modulators; Decimation, Interpolation and Converters; Applications. Readership: Final-year undergraduates; graduate students; electrical, electronic and systems engineers."
Download or read book Nanometer CMOS SIGMA Delta Modulators for Software Defined Radio written by and published by Springer. This book was released on 2011-09-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
