Download or read book Deformation Fracture and Microstructure of Metallic Materials written by Xiao-Wu Li and published by Mdpi AG. This book was released on 2023-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reprint has collected the latest scientific achievements in the microstructure-related deformation and fracture behavior of various metallic materials (e.g., steels, superalloys, and titanium alloys) under monotonical or cyclic loads. According to the research findings arising from this collection of works, the initial microstructure and microstructural evolution have a significant effect on deformation and fracture mechanisms and, thus, mechanical properties. To understand these influences, microstructure characterization, mechanical property testing, and numerical simulation are discussed in this reprint. These results are beneficial for promoting the potential applications of these materials and for the future development of novel high-performance metallic materials.
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Microstructure and Texture in Steels written by Arunansu Haldar and published by Springer Science & Business Media. This book was released on 2009-09-03 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure and Texture in Steels and Other Materials comprises a collection of articles pertaining to experimental and theoretical aspects of the evolution of crystallographic texture and microstructure during processing of steels and some other materials. Among the topics covered is the processing-microstructure-texture-property relationship in various kinds of steels, including the latest grade. Special emphasis has been given to introduce recent advances in the characterization of texture and microstructure, as well as modeling. The papers included are written by well-known experts from academia and industrial R and D, which will provide the reader with state-of-the-art, in-depth knowledge of the subject. With these attributes, Microstructure and Texture in Steels and Other Materials is expected to serve the cause of creating awareness of current developments in microstructural science and materials engineering among academic and R and D personnel working in the field.
Download or read book An Experimental Study of Deformation and Fracture of a Nanostructured Metallic Material written by Nisrin Rizek Abdel Al and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical properties of materials strongly depend on their microstructure. Therefore, engineering the material's microstructure can lead to improving its mechanical properties. One method for enhancing the strength of metallic materials consists of refining the grain size down to the nanometer scale. Such nanostructured materials possess remarkable strength without using conventional metallurgical strengthening methods. However, this strength often comes at the expense of workhardening capacity, thus favoring flow localization and loss of ductility and toughness. The deformation behavior of nanostructured metallic materials has been extensively studied in the literature. However, little is known of their fracture behavior. In this study, the mechanical behavior of a nanostructured, nearly pure material is investigated in order to link processing conditions, microstructure, and fracture locus in stress space. With focus laid on BCC materials which can undergo a ductile-to-brittle transition, Interstitial- Free (IF) steel is chosen. The microstructure is refined using Severe Plastic Deformation (SPD) to achieve ultra-fine grain (UFG) materials with grain sizes in the range 100nm- 1 mu m. Equal Channel Angular Extrusion (ECAE) is used to obtain three types of UFG-IF steel microstructures by varying the extrusion rate and processing temperature. The deformation behavior is investigated for the three UFG materials using round smooth bars and is compared with the behavior of the as-received material. The damage behavior and the fracture mechanisms are studied using tensile round notched bars with varying notch radii. The findings indicate a remarkable combination of strength and notch ductility at room temperature, including for the material with the finest microstructure. They also point to the need for careful characterization of temperature effects before such materials can be considered in structural applications.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by Wiley Global Education. This book was released on 2012-08-07 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation and Fracture Mechanics of Engineering Materials provides a combined fracture mechanics-materials approach to the fracture of engineering solids with comprehensive treatment and detailed explanations and references, making it the perfect resource for senior and graduate engineering students, and practicing engineers alike. The 5th edition includes new end-of-chapter homework problems, examples, illustrations, and a new chapter on products liability and recall addressing the associated social consequences of product failure. The new edition continues to discuss actual failure case histories, and includes new discussion of the fracture behavior and fractography of ceramics, glasses, and composite materials, and a section on natural materials including bone and sea shells. New co-authors Richard P. Vinci and Jason L. Hertzberg add their talent and expertise to broaden the book's perspective, while maintaining a balance between the continuum mechanics understanding of the failure of solids and the roles of the material's nano- and microstructure as they influence the mechanical properties of materials.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1996 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition comprehensively updates the field of fracture mechanics by including details of the latest research programmes. It contains new material on non-metals, design issues and statistical aspects. The application of fracture mechanics to different types of materials is stressed.
Download or read book Plastic Deformation and Fracture of Materials written by Robert W. Cahn and published by Wiley-VCH. This book was released on 1993 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Technology A Comprehensive Treatment Edited by R.W. Cahn, P. Haasen, E.J. Kramer The 18-volume series ‘Materials Science and Technology' is the first in-depth, topic-oriented reference work devoted to this growing interdisciplinary field. A compendium of current, state-of-the-art information, it covers the most important classes of materials: metals, ceramics, glasses, polymers, semiconductors, and composites, from the fundamentals of perfect semiconductors via the physics of defects to "artificial" and amorphous semiconductors. Edited by internationally renowned figures in materials science, this series is sure to establish itself as a seminal work. Volume 6: This volume focuses on the mechanisms of plastic deformation and fatigue affecting the properties and performance of a wide variety of materials. Topics included are: flow stress and work hardening • dislocation patterning • solid solution strengthening • particle strengthening • superplasticity • inelastic deformation • cyclic deformation • fracture mechanisms • friction and wear • high-temperature deformation and creep • deformation and textures of metals at large strains
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2008-11-27 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep refers to the slow, permanent deformation of materials under external loads, or stresses. It explains the creep strength or resistance to this extension. This book is for experts in the field of strength of metals, alloys and ceramics. It explains creep behavior at the atomic or "dislocation defect level. This book has many illustrations and many references. The figure formats are uniform and consistently labeled for increased readability. This book is the second edition that updates and improves the earlier edition. - Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials - Transmission electron micrographs provide direct insight into the basic microstructure of metals deforming at high temperatures - Extensive literature review of about 1000 references provides an excellent overview of the field
Download or read book Phenomenological Modeling of Deformation and Fracture in Metallic Materials with Evolving Microstructures written by Celâl Soyarslan and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanisms in Particle Hardened Alloys written by J. W. Martin and published by Cambridge University Press. This book was released on 1980-07-10 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was first published in 1980. A great number of metallic materials in practical use owe their strength to the presence in their microstructure of particles of a hard precipitated phase. The text emphasises the importance of scientific rather than empirical methods in attempting to develop particle-hardened alloys. The author progresses from an elementary knowledge of metallurgy to theories relating to the deformation and fracture of alloys of this type. He also discusses the use of such theories to describe observations on both model materials and practical metals. After a discussion of the microstructures of these alloys, how they form and how to describe them quantitatively, their deformation and fracture behaviour at both low and elevated temperatures are examined.
Download or read book Mechanical Behavior of Materials Deformation and fracture of metals written by and published by . This book was released on 1972 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure and Mechanical Properties of Structural Metals and Alloys written by Andrey Belyakov and published by MDPI. This book was released on 2019-06-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected in this special issue clearly reflect the modern research trends in materials science. These fields of specific attention are high-Mn TWIP steels, high-Cr heat resistant steels, aluminum alloys, ultrafine grained materials including those developed by severe plastic deformation, and high-entropy alloys. The major portion of the collected papers is focused on the mechanisms of microstructure evolution and the mechanical properties of metallic materials subjected to various thermo-mechanical, deformation or heat treatments. Another large portion of the studies is aimed on the elaboration of alloying design of advanced steels and alloys. The changes in phase content, transformation and particle precipitation and their effect on the properties are also broadly presented in this collection, including the microstructure/property changes caused by irradiation.
Download or read book Fatigue and Fracture of Medical Metallic Materials and Devices written by Michael R. Mitchell and published by ASTM International. This book was released on 2007 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strength and Toughness of Materials written by Toshiro Kobayashi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the shift from the Metal Age progresses, materials engineers and materials scientists seek new analytical and design methods to create stronger and more reliable materials. Based on extensive research and developmental work done at the author’s multi-disciplinary material laboratory, this graduate-level and professional reference addresses the relationship between fracture mechanisms (macroscale) and the microscopic, with the goal of explaining macroscopic fracture behavior based on a microscopic fracture mechanism. A careful fusion of mechanics and materials science, this text and monograph systematically considers an array of materials, from metals through ceramics and polymers, and demonstrates lab-tested strategies to develop desirable high-temperature materials for technological applications.
Download or read book Fatigue Crack Propagation in Metals and Alloys written by Ulrich Krupp and published by John Wiley & Sons. This book was released on 2007-04-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive overview of the whole field of fatigue and fracture of metallic materials covers both the theoretical background and some of the latest experimental techniques. It provides a summary of the complex interactions between material microstructure and cracks, classifying them with respect to the overall damage process with a focus on microstructurally short cracks and dynamic embrittlement. It furthermore introduces new concepts for the numerical treatment of fatigue microcrack propagation and their implementation in fatigue-life prediction models.This comprehensive overview of the whole field of fatigue and fracture of metallic materials covers both the theoretical background and the latest experimental techniques. It provides a summary of the complex interactions between material microstructure and cracks, classifying them with respect to the overall damage process. It furthermore introduces new concepts for the numerical treatment of fatigue microcrack propagation and their implementation in fatigue-life prediction models.
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field
Download or read book Applications and Non Metals written by D.M.R. Taplin and published by Elsevier. This book was released on 2013-10-22 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Research on the Strength and Fracture of Materials: Volume 3Bs—Applications and Non-Metals contains the proceedings of the Fourth International Conference on Fracture, held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to testing of fracture in a wide range of non-metals such as ceramics, glass, composites, polymers, biomaterials, and concrete. This volume is divided into five sections and opens by discussing the role of acoustic emission in fracture toughness testing and the relation between static and dynamic fracture toughness of structural steels. The reader is then introduced to methods for determining stress-intensity factors of simplified geometries of structural parts; stress analysis of pressure vessels by thermal shock; the fracture toughness of constructional steels in cyclic loading; and fracture processes and fracture toughness in powder forged steels. The remaining chapters explore the influence of low-cycle damage on fracture toughness; fracture of structural alloys at temperatures approaching absolute zero; fracture mechanisms in Si-Al-O-N ceramics; propagation and bifurcation of cracks in quartz; and the effect of pressure and environment on the fracture and yield of polymers. This monograph will be a useful resource for metallurgists, materials scientists, and structural and mechanical engineers.
