Download or read book Deformation and Fracture of Solids written by Robert M. Caddell and published by Prentice Hall. This book was released on 1980 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Flow Deformation and Fracture written by Grigory Isaakovich Barenblatt and published by Cambridge University Press. This book was released on 2014-06-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over forty years of teaching experience are distilled into this text. The guiding principle is the wide use of the concept of intermediate asymptotics, which enables the natural introduction of the modeling of real bodies by continua. Beginning with a detailed explanation of the continuum approximation for the mathematical modeling of the motion and equilibrium of real bodies, the author continues with a general survey of the necessary methods and tools for analyzing models. Next, specific idealized approximations are presented, including ideal incompressible fluids, elastic bodies and Newtonian viscous fluids. The author not only presents general concepts but also devotes chapters to examining significant problems, including turbulence, wave-propagation, defects and cracks, fatigue and fracture. Each of these applications reveals essential information about the particular approximation. The author's tried and tested approach reveals insights that will be valued by every teacher and student of mechanics.
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrating through examples, this book presents a mechanism-based perspective on the broad range of deformation and fracture response of solid polymers. It draws on the results of probing experiments and considers the similar mechanical responses of amorphous metals and inorganic compounds to develop advanced methodology for generating more precise forms of modelling. This, in turn, provides a better fundamental understanding of deformation and fracture phenomena in solid polymers. Such mechanism-based constitutive response forms have far-reaching application potential in the prediction of structural responses and in tailoring special microstructures for tough behaviour. Moreover, they can guide the development of computational codes for deformation processing of polymers at any level. Applications are wide-ranging, from large strain industrial deformation texturing to production of precision micro-fluidic devices, making this book of interest to both advanced graduate students and to practising professionals.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1996 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition comprehensively updates the field of fracture mechanics by including details of the latest research programmes. It contains new material on non-metals, design issues and statistical aspects. The application of fracture mechanics to different types of materials is stressed.
Download or read book Deformation and Fracture of Solid State Materials written by Sanichiro Yoshida and published by Springer. This book was released on 2014-11-17 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume introduces a comprehensive theory of deformation and fracture to engineers and applied scientists. Here “comprehensive” means that the theory can describe all stages of deformation from elastic to plastic and plastic to fracturing stage on the same basis (equations). The comprehensive approach is possible because the theory is based on a fundamental physical principle called the local symmetry, or gauge invariance, as opposed to phenomenology. Professor Yoshida explains the gist of local symmetry (gauge invariance) intuitively so that engineers and applied physicists can digest it easily, rather than describing physical or mathematical details of the principle. The author also describes applications of the theory to practical engineering, such as nondestructive testing in particular, with the use of an optical interferometric technique called ESPI (Electronic Speckle-Pattern Interferometry).The book is not a manual of applications. Instead, it provides information on how to apply physical concepts to engineering applications.
Download or read book X Ray Diffraction Studies on the Deformation and Fracture of Solids written by Kazuyoshi Tanaka and published by Elsevier. This book was released on 2017-01-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers current research findings and engineering applications of X–ray methods by the Japanese X–ray group members. The first part of the volume deals with fundamental problems in the methods for X–ray stress measurement. Phase stresses in the constituent phases of ceramic composites and ceramic-fiber reinforced metal-matrix composites are separately measured by X–rays, while three-dimensional stresses and thermal stresses in composites measured by X–rays are compared with the theoretical and numerical analyses. This work will therfore provide significant information for designing high-performance composites. Other topics covered include synchrotron X–ray radiation and the analysis of X–ray data by the Guassian curve method. Part two is devoted to the application of X–ray diffraction methods for various engineering purposes, the residual stress and half-value breadth (the full width at half the maximum) of the diffraction profiles being the two main X–ray parameters utilized in those applications. Chapters are included on X–ray fractography, a powerful technique for failure analysis, which is applied to the brittle fracture of ceramics and to the fatigue fracture of steels under various service conditions.
Download or read book Contributions to the Theory of Deformation and Fracture of Solids written by Ronald J. DiMelfi and published by . This book was released on 1975 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Finite Deformation and Fracture written by Majid Aleyaasin and published by CRC Press. This book was released on 2016-01-05 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important work covers the fundamentals of finite deformation in solids and constitutive relations for different types of stresses in large deformation of solids. In addition, the book covers the fracture phenomena in brittle or quasi-brittle materials in which large deformation does not occur. The book provides a thorough understanding of frac
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by John Wiley & Sons. This book was released on 2020-07-08 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation and Fracture Mechanics of Engineering Materials, Sixth Edition, provides a detailed examination of the mechanical behavior of metals, ceramics, polymers, and their composites. Offering an integrated macroscopic/microscopic approach to the subject, this comprehensive textbook features in-depth explanations, plentiful figures and illustrations, and a full array of student and instructor resources. Divided into two sections, the text first introduces the principles of elastic and plastic deformation, including the plastic deformation response of solids and concepts of stress, strain, and stiffness. The following section demonstrates the application of fracture mechanics and materials science principles in solids, including determining material stiffness, strength, toughness, and time-dependent mechanical response. Now offered as an interactive eBook, this fully-revised edition features a wealth of digital assets. More than three hours of high-quality video footage helps students understand the practical applications of key topics, supported by hundreds of PowerPoint slides highlighting important information while strengthening student comprehension. Numerous real-world examples and case studies of actual service failures illustrate the importance of applying fracture mechanics principles in failure analysis. Ideal for college-level courses in metallurgy and materials, mechanical engineering, and civil engineering, this popular is equally valuable for engineers looking to increase their knowledge of the mechanical properties of solids.
Download or read book Deformation and Fracture Behaviour of Polymers written by Wolfgang Grellmann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of recent advances in the fracture mechanics of polymers, morphology property correlations, hybrid methods for polymer testing and polymer diagnostics, and biocompatible materials and medical prostheses, as well as application examples and limits.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1989-01-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition of the well-received engineering materials book has been completely updated, and now contains over 1,100 citations. Thorough enough to serve as a text, and up-to-date enough to serve as a reference. There is a new chapter on strengthening mechanisms in metals, new sections on composites and on superlattice dislocations, expanded treatment of cast and powder-produced conventional alloys, plastics, quantitative fractography, JIC and KIEAC test procedures, fatigue, and failure analysis. Includes examples and case histories.
Download or read book Deformation and Fracture in Amorphous Solids written by Michael Lawrence Falk and published by . This book was released on 1998 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Flow and Fracture in Solids by Tracy Y Thomas written by and published by Elsevier. This book was released on 1961-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
Download or read book Multiscale Deformation and Fracture in Materials and Structures written by T-J. Chuang and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Solid Mechanics considers phenomena at many levels, ranging from nano size at atomic scale through the continuum level at millimeter size to large structures at the tens of meter scale. The deformation and fracture behavior at these various scales are inextricably related to interdisciplinary methods derived from applied mathematics, physics, chemistry, and engineering mechanics. This book, in honor of James R. Rice, contains articles from his colleagues and former students that bring these sophisticated methods to bear on a wide range of problems. Articles discussing problems of deformation include topics of dislocation mechanics, second particle effects, plastic yield criterion on porous materials, hydrogen embrittlement, solid state sintering, nanophases at surfaces, adhesion and contact mechanics, diffuse instability in geomaterials, and percolation in metal deformation. In the fracture area, the topics include: elastic-plastic crack growth, dynamic fracture, stress intensity and J-integral analysis, stress-corrosion cracking, and fracture in single crystal, piezoelectric, composite and cementitious materials. The book will be a valuable resource for researchers in modern solid mechanics and can be used as reference or supplementary text in mechanical and civil engineering, applied mechanics, materials science, and engineering graduate courses on fracture mechanics, elasticity, plasticity, mechanics of materials or the application of solid mechanics to processing, and reliability of life predictions.
Download or read book High Pressure Shock Compression of Solids II written by Lee Davison and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concerns the fracture and fragmentation of solid materials that occurs when they are subjected to extremes of stress applied at the highest possible rates. The plan for the volume is to address experimental, theoretical, and com putational aspects of high-rate dynamic fracture and fragmentation, with emphasis on recent work. We begin with several chapters in which the emphasis falls on experimental methods and observations. These chapters address both macroscopic responses and the microscopic cause of these re sponses. This is followed by several chapters emphasizing modeling-the physical explanation and mathematical representation of the observations. Some of the models are deterministic, while others focus on the stochastic aspects of the observations. Often, the ov\!rall objective of investigation of dynamic fracture and fragmentation phenomena is provision of a means for predicting the entire course of an event that begins with a stimulus such as an impact and proceeds through a complicated deformation and fracture pro cess that results in disintegration of the body and formation of a rapidly expanding cloud of debris fragments. Analysis of this event usually involves development of a continuum theory and computer code that captures the experimental observations by incorporating models of the important pheno mena into a comprehensive description of the deformation and fracture pro cess. It is to this task that the work of the last few chapters is devoted.
Download or read book Theory of Flow and Fracture of Solids written by Arpád Nádai and published by . This book was released on 1950 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture of Brittle Solids written by Brian R. Lawn and published by Cambridge University Press. This book was released on 1993-06-03 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a monograph on the brittle fracture of ceramic materials, in a unified continuum, microstructural and atomistic treatment.
