Download or read book Defects and Synchrotron X Ray Topography in Silicone Carbide Based Devices written by Juraj Marek and published by Trans Tech Publications Ltd. This book was released on 2023-06-06 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only
Download or read book Defects and Diffusion in Semiconductors An Annual Retrospective VII written by David Fisher and published by Trans Tech Publications Ltd. This book was released on 2004-11-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seventh volume in the series covering the latest results in the field includes abstracts of papers which appeared between the publication of Annual Retrospective VI (Volumes 221-223) and the end of September 2004 (allowing for vagaries of journal availability).
Download or read book Physics and Technology of Silicon Carbide Devices written by Yasuto Hijikata and published by BoD – Books on Demand. This book was released on 2012-10-16 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, some SiC power devices such as Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effect-transistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. However, to stably supply them and reduce their cost, further improvements for material characterizations and those for device processing are still necessary. This book abundantly describes recent technologies on manufacturing, processing, characterization, modeling, and so on for SiC devices. In particular, for explanation of technologies, I was always careful to argue physics underlying the technologies as much as possible. If this book could be a little helpful to progress of SiC devices, it will be my unexpected happiness.
Download or read book Gallium Nitride and Silicon Carbide Power Technologies 8 written by M. Dudley and published by The Electrochemical Society. This book was released on 2018-09-21 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide written by Moumita Mukherjee and published by BoD – Books on Demand. This book was released on 2011-10-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) and its polytypes, used primarily for grinding and high temperature ceramics, have been a part of human civilization for a long time. The inherent ability of SiC devices to operate with higher efficiency and lower environmental footprint than silicon-based devices at high temperatures and under high voltages pushes SiC on the verge of becoming the material of choice for high power electronics and optoelectronics. What is more important, SiC is emerging to become a template for graphene fabrication, and a material for the next generation of sub-32nm semiconductor devices. It is thus increasingly clear that SiC electronic systems will dominate the new energy and transport technologies of the 21st century. In 21 chapters of the book, special emphasis has been placed on the materials aspects and developments thereof. To that end, about 70% of the book addresses the theory, crystal growth, defects, surface and interface properties, characterization, and processing issues pertaining to SiC. The remaining 30% of the book covers the electronic device aspects of this material. Overall, this book will be valuable as a reference for SiC researchers for a few years to come. This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. The primary target for the book includes students, researchers, material and chemical engineers, semiconductor manufacturers and professionals who are interested in silicon carbide and its continuing progression.
Download or read book Crystal Growth Technology written by Hans J. Scheel and published by John Wiley & Sons. This book was released on 2011-07-26 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors and dielectrics are two essential materials found in cell phones and computers, for example, and both are manufactured by growing crystals. Edited by the organizers of the International Workshop on Crystal Growth Technology, this ready reference is essential reading for materials scientists, chemists, physicists, computer hardware manufacturers, engineers, and those working in the chemical and semiconductor industries. They have assembled an international team of experts who present the current challenges, latest methods and new applications for producing these materials necessary for the electronics industry using bulk crystal growth technology. From the contents: * General aspects of crystal growth technology * Compound semiconductors * Halides and oxides * Crystal growth for sustaining energy * Crystal machining
Download or read book Silicon Carbide Microsystems for Harsh Environments written by Muthu Wijesundara and published by Springer Science & Business Media. This book was released on 2011-05-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods towards system level integration of components and key challenges are evaluated and discussed based on the current state of SiC materials processing and device technology. Issues such as temperature mismatch, process compatibility and temperature stability of individual components and how these issues manifest when building the system receive thorough investigation. The material covered not only reviews the state-of-the-art MEMS devices, provides a framework for the joining of electronics and MEMS along with packaging into usable harsh-environment-ready sensor modules.
Download or read book ICCGE 19 OMVPE 19 Program and Abstracts eBook written by ICCGE-19/OMVPE-19/AACG and published by CTI Meeting Technology. This book was released on 2019-07-11 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of abstracts for the 19th International Conference on Crystal Growth and Epitaxy (ICCGE-19) to be held jointly with the 19th US Biennial Workshop on Organometallic Vapor Phase Epitaxy (OMVPE-19) and the 17th International Summer School on Crystal Growth (ISSCG-17).
Download or read book Silicon Carbide 2008 materials Processing and Devices written by Michael Dudley and published by . This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Crystal Growth Technology written by K. Byrappa and published by Springer Science & Business Media. This book was released on 2003-04-17 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystals are the unacknowledged pillars of modern technology. The modern technological developments depend greatly on the availability of suitable single crystals, whether it is for lasers, semiconductors, magnetic devices, optical devices, superconductors, telecommunication, etc. In spite of great technological advancements in the recent years, we are still in the early stage with respect to the growth of several important crystals such as diamond, silicon carbide, PZT, gallium nitride, and so on. Unless the science of growing these crystals is understood precisely, it is impossible to grow them as large single crystals to be applied in modern industry. This book deals with almost all the modern crystal growth techniques that have been adopted, including appropriate case studies. Since there has been no other book published to cover the subject after the Handbook of Crystal Growth, Eds. DTJ Hurle, published during 1993-1995, this book will fill the existing gap for its readers. The book begins with "Growth Histories of Mineral Crystals" by the most senior expert in this field, Professor Ichiro Sunagawa. The next chapter reviews recent developments in the theory of crystal growth, which is equally important before moving on to actual techniques. After the first two fundamental chapters, the book covers other topics like the recent progress in quartz growth, diamond growth, silicon carbide single crystals, PZT crystals, nonlinear optical crystals, solid state laser crystals, gemstones, high melting oxides like lithium niobates, hydroxyapatite, GaAs by molecular beam epitaxy, superconducting crystals, morphology control, and more. For the first time, the crystal growth modeling has been discussed in detail with reference to PZT and SiC crystals.
Download or read book Gallium Nitride and Silicon Carbide Power Technologies 7 written by M. Dudley and published by The Electrochemical Society. This book was released on with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide 2004 Materials Processing and Devices Volume 815 written by Materials Research Society. Meeting and published by . This book was released on 2004-08-24 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Silicon Carbide written by Peter Friedrichs and published by John Wiley & Sons. This book was released on 2011-04-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. Its physical properties make it more promising for high-powered devices than silicon. The volume is devoted to the material and covers methods of epitaxial and bulk growth. Identification and characterization of defects is discussed in detail. The contributions help the reader to develop a deeper understanding of defects by combining theoretical and experimental approaches. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a substrate material for the manufacture of controlled graphene. SiC and graphene research is oriented towards end markets and has high impact on areas of rapidly growing interest like electric vehicles. The list of contributors reads like a "Who's Who" of the SiC community, strongly benefiting from collaborations between research institutions and enterprises active in SiC crystal growth and device development.
Download or read book Semiconductor Characterization written by W. Murray Bullis and published by American Institute of Physics. This book was released on 1996 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market: Those in government, industry, and academia interested in state-of-the-art knowledge on semiconductor characterization for research, development, and manufacturing. Based on papers given at an International Nist Workshop in January 1995, Semiconductor Characterization covers the unique characterization requirements of both silicon IC development and manufacturing, and compound semiconductor materials, devices, and manufacturing. Additional sections discuss technology trends and future requirements for compound semiconductor applications. Also highlighted are recent developments in characterization, including in- situ, in-FAB, and off-line analysis methods. The book provides a concise, effective portrayal of industry needs and problems in the important specialty of metrology for semiconductor technology.
Download or read book VLSI Technology written by Wai-Kai Chen and published by CRC Press. This book was released on 2003-03-19 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: As their name implies, VLSI systems involve the integration of various component systems. While all of these components systems are rooted in semiconductor manufacturing, they involve a broad range of technologies. This volume of the Principles and Applications of Engineering series examines the technologies associated with VLSI systems, including
Download or read book SiC Power Materials written by Zhe Chuan Feng and published by Springer Science & Business Media. This book was released on 2004-06-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s Shockley predicted that SiC would quickly replace Si as a result of its superior material properties. In many ways he was right and today there is an active industry based on SiC, with new achievements being reported every year. This book reviews the progress achieved in SiC research and development, particularly over the past 10 years. It presents the essential properties of 3C-, 6H- and 4H-SiC polytypes including structural, electrical, optical, surface and interface properties; describes existing key SiC devices and also the challenges in materials growth and device fabrication of the 21st century. Overall it provides an up-to-date reference book suitable for a broad audience of newcomers, graduate students and engineers in industrial R&D.
