Download or read book Defects and Radiation Damage in Metals written by M. W. Thompson and published by Cambridge University Press. This book was released on 1974-09-12 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of radiation damage in solids generally has been stimulated by the technological demands of nuclear energy and space research. Professor Thompson's 1969 book discusses the basic atomic mechanisms which give rise to the main effects induced by radiation in metals, since it is in their relatively simple structures that the fundamental processes can be most easily identified. The first part of the book describes the nature of lattice defects in metal crystals. The presentation leads naturally into the discussion of radiation damage in the second part and recognises the important contribution that the study of irradiated metals has made to our general knowledge of defects. The wide coverage of this book includes developments in our understanding of collision cascades, of the clustering of point defects and the behaviour of impurities induced by irradiation.
Download or read book Defects and Radiation Damage in Metals written by Michael Warwick Thompson and published by . This book was released on 2000 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects and radiation damage in metals written by M. W. Thompson and published by . This book was released on 1969 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Damage in Metals written by N. L. Peterson and published by . This book was released on 1976 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Damage in Some Refractory Metals written by R.P. Agarwala and published by Trans Tech Publications Ltd. This book was released on 2005-07-01 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Chapter1 of this timely book, radiation damage in vanadium, niobium, molybdenum and tungsten is discussed at the atomic level; treating for instance - third-stage recovery in terms of self-interstitials being mobile traps for - predominantly - vacancies. Higher recovery stages are treated by using various techniques, such as: electrical resistivity, electron microscopy, positron annihilation spectroscopy and computer simulation - thus revealing vacancy-cluster break-up in stage-V and interstitial cluster annealing in stage-VI.
Download or read book Effects of Radiation on Materials written by N. H. Packan and published by ASTM International. This book was released on 1990 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Effects of Radiation on Materials: Fourteenth International Symposium was presented at Andover, MA, June 1988. The symposium was sponsored by ASTM Committee E-10 on Nuclear Technology and Applications. The papers from the first three days of the symposium appear in the two volumes of this publication. Volume I encompasses radiation damage- induced microstructures; point defect, solute, and gas atom effects; atomic-level measurement techniques; and applications of theory. Volume II includes mechanical behavior, all papers dealing with pressure-vessel steels, breeder reactor components, dosimetry, and nuclear fuels. The fourth day of the symposium was devoted to the single topic of reduced-activation materials (see TK9204). The two volumes are separately sold at $127 and $128 respectively; each is independently indexed. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Fundamentals of Radiation Materials Science written by Gary S. Was and published by Springer Science & Business Media. This book was released on 2007-07-14 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an eye-opening treatise on the fundamentals of the effects of radiation on metals and alloys. When energetic particles strike a solid, numerous processes occur that can change the physical and mechanical properties of the material. Metals and alloys represent an important class of materials that are subject to intense radiation fields. Radiation causes metals and alloys to swell, distort, blister, harden, soften and deform. This textbook and reference covers the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys.
Download or read book Radiation Damage in Metals written by N. L. Peterson and published by . This book was released on 1976 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Structural Materials written by James A. Sprague and published by ASTM International. This book was released on 1979 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics of Radiation Effects in Crystals written by R.A. Johnson and published by Elsevier. This book was released on 2012-12-02 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: ``Physics of Radiation Effects in Crystals'' is presented in two parts. The first part covers the general background and theory of radiation effects in crystals, including the theory describing the generation of crystal lattice defects by radiation, the kinetic approach to the study of the disposition of these defects and the effects of the diffusion of these defects on alloy compositions and phases. Specific problems of current interest are treated in the second part and include anisotropic dimensional changes in x-uranium, zirconium and graphite, acceleration of thermal creep in reactor materials, and radiation damage of semiconductors and superconductors.
Download or read book Radiation Effects in Solids written by George Julian Dienes and published by . This book was released on 1957 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction -- The interaction of radiation with matter -- Basic experiments -- Nature and properties of the defects -- Annealing of defects -- Special topics.
Download or read book Application of Particle and Laser Beams in Materials Technology written by P. Misaelides and published by Springer Science & Business Media. This book was released on 1995-01-31 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of advanced materials with preselected properties is one of the main goals of materials research. Of especial interest are electronics, high-temperature and superhard materials for various applications, as well as alloys with improved wear, corrosion and mechanical resistance properties. The technical challenge connected with the production of these materials is not only associated with the development of new specialised preparation techniques but also with quality control. The energetic charged particle, electron and photon beams offer the possibility of modifying the properties of the near-surface regions of materials without seriously affecting their bulk, and provide unique analytical tools for testing their quality. Application of Particle and Laser Beams in Materials Technology provides an overview of this rapidly expanding field. Fundamental aspects concerning the interactions and collisions on atomic, nuclear and solid state scale are presented in a didactic way, along with the application of a variety of techniques for the solution of problems ranging from the development of electronics materials to corrosion research and from archaeometry to environmental protection. The book is divided into six thematic units: Fundamentals, Surface Analysis Techniques, Laser Beams in Materials Technology, Accelerator-Based Techniques in Materials Technology, Materials Modification and Synchrotron Radiation.
Download or read book Radiation Damage in Solids written by Douglas S. Billington and published by . This book was released on 1962 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystalline defects and their detection -- Radiation damage theory -- Radiation damage in semiconductors -- Radiation damage in ionic and covalent crystals -- Radiation damage in metals -- Radiation damage in uranium -- Special seminars.
Download or read book The Effect of Nuclear Radiation on Structural Metals written by Frederic R. Shober and published by . This book was released on 1961 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of fast-neutron (>1 Mev) irradiation on the mechanical properties of structural metals and alloys was studied. Although the yield strengths and ultimate tensile strengths are increased su stantially for most materials, the ductility suffers severe decreases. This report presents these changes in properties of several structural metals for a number of neutron exposures within the 1.0 x 10 to the 18th power to 5.0 x 10 to the 21st power n/sq cm range. Data summarizing these effects on several classes of materials such as carbon steels, low-alloy steels, stainless steels, Zr-base alloys, ni-base alloys, Al-base alloys, and Ta are given. Additional data which show the influence f irradiation temperatures and of post-irradiation annealing on the radiation-induced property changes are also given and discussed. Increases as great as 175% in yield strength, 100% in ultimate strength, and decreases of 80% in total elongation are reported for fast-neutron exposures as great as 5 10 to the 21st power n/sq cm. (Author).
Download or read book Radiation Damage in Metals written by N. L. Peterson and published by . This book was released on 1976 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.
Download or read book Effects of Radiation on Substructure and Mechanical Properties of Metals and Alloys written by John Moteff and published by ASTM International. This book was released on 1973 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
