Download or read book Defects and Diffusion Theory Simulation II written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2010-12-23 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume in a new series covering entirely general results in the fields of defects and diffusion includes 356 abstracts of papers which appeared between the end of 2009 and the end of 2010. As well as the abstracts, the volume includes original papers on theory/simulation, semiconductors and metals: “Predicting Diffusion Coefficients from First Principles ...” (Mantina, Chen & Liu), “Gouge Assessment for Pipes ...” (Meliani, Pluvinage & Capelle), “Simulation of the Impact Behaviour of ... Hollow Sphere Structures” (Ferrano, Speich, Rimkus, Merkel & Öchsner), “Elastic-Plastic Fracture Mechanics Model ...” (Liao), “Calculation of Fracture Toughness for Hydrogen Embrittlement ...” (Mahdavi & Mashhadi), “... Method to Describe the Role of Diffusion in Catalyst Design” (Zeynali), “... Axial Shift and Spin Hamiltonian Parameters for Mn2+ in CdS ...” (Wang, Wu, Hu & Xu), “Structure and Electronic Properties of Evaporated Thin Films of Lead Sulfide” (Ibrahim), “Acoustic Emission during Isothermal Oxidation of ... Steel” (Jha, Mishra & Ojha), “... Carbon Content versus Heating Temperature in Austenitizing of Cast Iron” (Gong & Xiang), “Exploration of Parameters of Ashcroft’s Potential ...” (Ghorai), Effect of Tribological Parameters upon Mechanical Wear ...” (El Azizi, Meliani, Belalia & Benamar)

Download or read book Defects and Diffusion Theory and Simulation written by D. J. Fisher and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume in a new series covering entirely general results in the fields of defects and diffusion includes 356 abstracts of papers which appeared between the end of 2009 and the end of 2010. As well as the abstracts, the volume includes original papers on theory/simulation, semiconductors and metals: "Predicting Diffusion Coefficients from First Principles ..." (Mantina, Chen & Liu), "Gouge Assessment for Pipes ..." (Meliani, Pluvinage & Capelle), "Simulation of the Impact Behaviour of ... Hollow Sphere Structures" (Ferrano, Speich, Rimkus, Merkel & Öchsner), "Elastic-Plastic Fracture Mechanics Model ..." (Liao), "Calculation of Fracture Toughness for Hydrogen Embrittlement ..." (Mahdavi & Mashhadi), "... Method to Describe the Role of Diffusion in Catalyst Design" (Zeynali), "... Axial Shift and Spin Hamiltonian Parameters for Mn2+ in CdS ..." (Wang, Wu, Hu & Xu), "Structure and Electronic Properties of Evaporated Thin Films of Lead Sulfide" (Ibrahim), "Acoustic Emission during Isothermal Oxidation of ... Steel" (Jha, Mishra & Ojha), "... Carbon Content versus Heating Temperature in Austenitizing of Cast Iron" (Gong & Xiang), "Exploration of Parameters of Ashcroft's Potential ..." (Ghorai), Effect of Tribological Parameters upon Mechanical Wear ..." (El Azizi, Meliani, Belalia & Benamar)

Download or read book Defects and Diffusion Theory and Simulation III written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2012-01-03 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on materials engineering comprises a collection of abstracts of recent scholarly papers and articles concerning a wide variety of topics related to the effects of structural defects and diffusion in many material areas, including thin-film manufacturing and facing metals.

Download or read book Defects and Diffusion Theory and Simulation III written by and published by . This book was released on 2012 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on materials engineering comprises a collection of abstracts of recent scholarly papers and articles concerning a wide variety of topics related to the effects of structural defects and diffusion in many material areas, including thin-film manufacturing and facing metals. This volume on materials engineering provides a collection of abstracts for recent scholarly papers and articles on a wide variety of topics related to the effects of structural defects and diffusion in several material areas including thin film manufacturing and faced metals. The abstracts are divided into sections covering diffusion processes, linear defects, planar defects, and point defects, and each abstract includes publication information. The text includes both an author and key word index.

Download or read book Defects and Diffusion in Metals written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2000-01-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second issue, following DDF165-166, to cover recent progress in this field. As usual, priority in abstracting has been given to the most accessible work and, in particular, to those papers which furnish original data or report important new techniques, phenomena or anomalies, although there is also extensive overage of more qualitative features of diffusion and defect phenomena, of the predictions of computer models, and of theoretical studies.

Download or read book Defects and Diffusion in Ceramics IX written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2007-11-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect and Diffusion Forum Vol. 268

Download or read book Diffusion Processes Experiment Theory Simulations written by Andrzej Pekalski and published by Springer. This book was released on 1994-11-25 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles in this book reflect the omnipresence of diffusion processes in the natural sciences. They describe experimental results as well as theoretical models and computer simulations, and address a wide readership including graduate students. The problems treated stem from physics, astronomy, physical chemistry, biology, and medicine. The papers are presented in a tutorial style and reflect the present-day trends in the field.

Download or read book Diffusion and Defect Data written by and published by . This book was released on 2000 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intrinsic Point Defects Impurities and Their Diffusion in Silicon written by Peter Pichler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the first comprehensive review of intrinsic point defects, impurities and their complexes in silicon. Besides compiling the structures, energetic properties, identified electrical levels and spectroscopic signatures, and the diffusion behaviour from investigations, it gives a comprehensive introduction into the relevant fundamental concepts.

Download or read book Proceedings of the Third International Symposium on Defects in Silicon written by Takao Abe and published by The Electrochemical Society. This book was released on 1999 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book C H N and O in Si and Characterization and Simulation of Materials and Processes written by A. Borghesi and published by Newnes. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 200 papers, this volume contains the proceedings of two symposia in the E-MRS series. Part I presents a state of the art review of the topic - Carbon, Hydrogen, Nitrogen and Oxygen in Silicon and in Other Elemental Semiconductors. There was strong representation from the industrial laboratories, illustrating that the topic is highly relevant for the semiconductor industry. The second part of the volume deals with a topic which is undergoing a process of convergence with two concerns that are more particularly application oriented. Firstly, the advanced instrumentation which, through the use of atomic force and tunnel microscopies, high resolution electron microscopy and other high precision analysis instruments, now allows for direct access to atomic mechanisms. Secondly, the technological development which in all areas of applications, particularly in the field of microelectronics and microsystems, requires as a result of the miniaturisation race, a precise mastery of the microscopic mechanisms.

Download or read book Defects and Diffusion in Metals written by and published by . This book was released on 2001 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Defects and Diffusion in Metals 2007 written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2007-05-15 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect and Diffusion Forum Vol. 265

Download or read book Diffusion in Materials written by A.L. Laskar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the NATO Advanced Study Institute, "Diffusion in Materials", held at "Centre Paul Langevin", Aussois, during March 12-25, 1989. There were 105 participants of whom 24 were lecturers and members of the international advisory committee. In addition to the participants from NATO countries, a small number of participants came from Australia, Hungary, Poland and Tunisia. The principal aim of the organizing committee was to bring together scientists of wide interest and expertise in the field of diffusion and to familiarize the young workers in material science with the wide range of theoretical models and methods and of experimental techniques . The Institute was concerned with the study of diffusion and related phenomena in solids which are at the cutting edge of novel technologies. The discussion of basic theories of defects in solids and their transport, with their applications in the understanding of diffusion processes in "simple solids" was followed by the wide range of current theoretical models and methods, experimental techniques and their potential. The lectures on the diffusion in specific materials included : metals, dilute and concentrated alloys, simple and compound semiconductors, stoichiometric and non-stoichiometric oxides, high-Tc compounds, carbides, nitrides, silicates, conducting polymers and thin films, ionic, superionic, amorphous and irradiated materials.

Download or read book Computational Materials Science written by Eugene Kotomin and published by IOS Press. This book was released on 2003 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coupled Diffusion Of Impurity Atoms And Point Defects In Silicon Crystals written by Oleg Velichko and published by World Scientific. This book was released on 2019-11-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a comprehensive theory describing atomic diffusion in silicon crystals under strong nonequilibrium conditions caused by ion implantation and interaction with the surface or other interfaces. A set of generalized equations that describe diffusion of impurity atoms and point defects are presented in a form suitable for solving numerically. Based on this theory, partial diffusion models are constructed, and the simulation of many doping processes used in microelectronics is carried out.Coupled Diffusion of Impurity Atoms and Point Defects in Silicon Crystals is a useful text for researchers, engineers, and advanced students in semiconductor physics, microelectronics, and nanoelectronics. It helps readers acquire a deep understanding of the physics of diffusion and demonstrates the practical application of the theoretical ideas formulated to find cheaper solutions in the course of manufacturing semiconductor devices and integrated microcircuits.

Download or read book Topics in the Theory of Solid Materials written by J.M. Vail and published by CRC Press. This book was released on 2018-10-08 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in the Theory of Solid Materials provides a clear and rigorous introduction to a wide selection of topics in solid materials, overlapping traditional courses in both condensed matter physics and materials science and engineering. It introduces both the continuum properties of matter, traditionally the realm of materials science courses, and the quantum mechanical properties that are usually more emphasized in solid state physics courses, and integrates them in a manner that will be of use to students of either subject. The book spans a range of basic and more advanced topics, including stress and strain, wave propagation, thermal properties, surface waves, polarons, phonons, point defects, magnetism, and charge density waves. Topics in the Theory of Solid Materials is eminently suitable for graduates and final-year undergraduates in physics, materials science, and engineering, as well as more advanced researchers in academia and industry studying solid materials.