Download or read book Deep Foundations 2002 written by Michael W. O'Neill and published by American Society of Civil Engineers. This book was released on 2002 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Deep Foundations Congress 2002, held in Orlando, Florida, February 14-16, 2002. Sponsored by The Geo-Institute of ASCE. This Geotechnical Special Publication contains 110 papers documenting applied research and engineering experience in the area of deep foundations. The volume is a comprehensive resource for both researchers and practitioners covering driven, jacked, and augered piles and drilled shafts. Topics include: geotechnical design, structural design, innovative construction, validation and verification of design and construction, soil-structure interaction, reliability-based design, field load testing for design, concepts for deep foundation systems (such as piled rafts), numerical and analytical modeling of pile foundations, design of foundations for extreme events, and numerous and varied case histories. Several papers also focus on the acquisition and use of geomaterial properties for deep foundation design and the use of deep foundations in walls.

Download or read book Deep Foundations 2002 written by Michael W. O'Neill and published by American Society of Civil Engineers. This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Deep Foundations Congress 2002, held in Orlando, Florida, February 14-16, 2002. Sponsored by The Geo-Institute of ASCE. This Geotechnical Special Publication contains 110 papers documenting applied research and engineering experience in the area of deep foundations. The volume is a comprehensive resource for both researchers and practitioners covering driven, jacked, and augered piles and drilled shafts. Topics include: geotechnical design, structural design, innovative construction, validation and verification of design and construction, soil-structure interaction, reliability-based design, field load testing for design, concepts for deep foundation systems (such as piled rafts), numerical and analytical modeling of pile foundations, design of foundations for extreme events, and numerous and varied case histories. Several papers also focus on the acquisition and use of geomaterial properties for deep foundation design and the use of deep foundations in walls.

Download or read book Deep Foundations on Bored and Auger Piles BAP V written by William F. Van Impe and published by CRC Press. This book was released on 2008-08-20 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although progressing very well over the last years, the design criteria for bored and auger piles are still not fully under control and in acceptable synergism with the real pile foundation behaviour. Although there has been a lot of research in the past years worldwide on deep foundation engineering, the strong and competitive market ha

Download or read book Advances in Deep Foundations written by Yoshiaki Kikuchi and published by Taylor & Francis. This book was released on 2007-06-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Engineering has recently seen enormous progress in the core field of the construction of deep foundations. This book is the result of the International Workshop on Recent Advances in Deep Foundations (IWDPF07), which was held in Yokosuka, Japan from the 1st to the 2nd of February, 2007. Topics under discussion in this book include recent rese

Download or read book Nondestructive Testing of Deep Foundations written by Bernard Hertlein and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nondestructive Testing involves the use of methods such as wave propagation, electromagnetism, electrical conductivity, and thermal conductivity to test structural integrity and thereby allow nondestructive assessment of structures and the possibility of structural failures before they occur. Nondestructive Testing of Deep Foundations covers different techniques designed to provide information about the integrity and quality of the material that makes up a deep foundation. Nondestructive Testing methods are used at all stages of a structure's life - from new construction quality control to residual lifetime prediction, and even during the monitoring of demolition. In addition, Nondestructive Testing is being increasingly specified in deep foundation projects, though often without a good understanding of its limitations and with the result that methods are often misused. In order to be able to specify an appropriate method, or to recognize an inappropriate specification, it is necessary for the engineer, specifier and/or contractor to understand the capabilities and limitations of each of the methods currently in use. Nondestructive Testing of Deep Foundations: Describes the most commonly used deep foundation construction techniques, including typical use of material Provides a brief history of the development of commercially available nondestructive methods Summarises each method's capabilities and limitations Acts as a one stop reference drawing together resources only previously available in conference proceedings and journal papers This manual will prove to be a welcome addition to the bookshelf of all practitioners in civil/structural and geotechnical engineering and architecture. It will also provide a valuable insight into this highly technical field for university researchers, lecturers and postgraduate students in civil/structural and geotechnical engineering.

Download or read book Load and Resistance Factor Design LRFD for Deep Foundations written by Samuel G. Paikowsky and published by Transportation Research Board. This book was released on 2004 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- Bibliography -- Appendixes.

Download or read book The Foundation Engineering Handbook written by Manjriker Gunaratne and published by CRC Press. This book was released on 2013-11-26 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering how structures interact with soil, and building proper foundations, is vital to ensuring public safety and to the longevity of buildings. Understanding the strength and compressibility of subsurface soil is essential to the foundation engineer. The Foundation Engineering Handbook, Second Edition provides the fundamentals of foundation e

Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Current Practices and Future Trends in Deep Foundations written by Jerry A. DiMaggio and published by . This book was released on 2004 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 125 contains 26 papers on state-of-the-art developments in deep foundation collected in honor of George G. Goble, Ph.D., P.E.

Download or read book The Engineering of Foundations Slopes and Retaining Structures written by Rodrigo Salgado and published by CRC Press. This book was released on 2022-06-01 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering of Foundations, Slopes and Retaining Structures rigorously covers the construction, analysis, and design of shallow and deep foundations, as well as retaining structures and slopes. It includes complete coverage of soil mechanics and site investigations. This new edition is a well-designed balance of theory and practice, emphasizing conceptual understanding and design applications. It contains illustrations, applications, and hands-on examples that continue across chapters. Soil mechanics is examined with full explanation of drained versus undrained loading, friction and dilatancy as sources of shear strength, phase transformation, development of peak effective stress ratios, and critical-state and residual shear strength. The design and execution of site investigations is evaluated with complete discussion of the CPT and SPT. Additional topics include the construction, settlement and bearing capacity of shallow foundations, as well as the installation, ultimate resistance and settlement of deep foundations. Both traditional knowledge and methods and approaches based on recent progress are available. Analysis and design of retaining structures and slopes, such as the use of slope stability software stability calculations, is included. The book is ideal for advanced undergraduate students, graduate students and practicing engineers and researchers.

Download or read book The Application of Stress wave Theory to Piles written by Jaime Alberto dos Santos and published by IOS Press. This book was released on 2008 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume contains 101 papers presented at the 8th International Conference on the Application of Stress Wave Theory to Piles, held in Lisbon, Portugal in 2008." "It is divided in 14 chapters according to the conference themes: Wave mechanics applied to pile engineering; Relationship between static resistance to driving and long-term static soil resistance; Case histories involving measurementand analysis of stress waves; Dynamic monitoring of driven piles; Dynamic soil-pile interaction models - numerical and physical modeling; High-strain dynamic test; Low-strain dynamic test; Rapid-load test; Monitoring and analysis of vibratory driven piles; Correlation of dynamic and static load tests; Quality assurance of deep foundations using dynamic methods; Incorporation of dynamic testing into design codes and testing standards; Ground vibrations induced by pile motions; Dynamic measurements in ground field testing." "This conference aims to contribute to a better and more efficient professional interaction between specialized contractors, designers and academicians. By joining the contribution of all of them it was possible to elucidate the today's state-of-the-art in science, technology and practice in the application of stress wave theory to piles."--BOOK JACKET.

Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

Download or read book Model Uncertainties in Foundation Design written by Chong Tang and published by CRC Press. This book was released on 2021-03-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Uncertainties in Foundation Design is unique in the compilation of the largest and the most diverse load test databases to date, covering many foundation types (shallow foundations, spudcans, driven piles, drilled shafts, rock sockets and helical piles) and a wide range of ground conditions (soil to soft rock). All databases with names prefixed by NUS are available upon request. This book presents a comprehensive evaluation of the model factor mean (bias) and coefficient of variation (COV) for ultimate and serviceability limit state based on these databases. These statistics can be used directly for AASHTO LRFD calibration. Besides load test databases, performance databases for other geo-structures and their model factor statistics are provided. Based on this extensive literature survey, a practical three-tier scheme for classifying the model uncertainty of geo-structures according to the model factor mean and COV is proposed. This empirically grounded scheme can underpin the calibration of resistance factors as a function of the degree of understanding – a concept already adopted in the Canadian Highway Bridge Design Code and being considered for the new draft for Eurocode 7 Part 1 (EN 1997-1:202x). The helical pile research in Chapter 7 was recognised by the 2020 ASCE Norman Medal.

Download or read book Physical Modelling in Geotechnics Volume 2 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 1333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Download or read book Design of Pile Foundations in Liquefiable Soils written by Gopal Madabhushi and published by World Scientific. This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis.The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice.

Download or read book Drilled Shafts in Rock written by Lianyang Zhang and published by CRC Press. This book was released on 2004-05-15 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilled shafts in rock are widely used as foundations of heavy structures such as highway bridges and tall buildings. Although much has been learned about the analysis and design of drilled shafts in rock, all the major findings are published in the form of reports and articles in technical journals and conference proceedings. This book i

Download or read book Geotechnical Problem Solving written by John C. Lommler and published by John Wiley & Sons. This book was released on 2012-01-26 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devised with a focus on problem solving, Geotechnical Problem Solving bridges the gap between geotechnical and soil mechanics material covered in university Civil Engineering courses and the advanced topics required for practicing Civil, Structural and Geotechnical engineers. By giving newly qualified engineers the information needed to apply their extensive theoretical knowledge, and informing more established practitioners of the latest developments, this book enables readers to consider how to confidently approach problems having thought through the various options available. Where various competing solutions are proposed, the author systematically leads through each option, weighing up the benefits and drawbacks of each, to ensure the reader can approach and solve real-world problems in a similar manner The scope of material covered includes a range of geotechnical topics, such as soil classification, soil stresses and strength and soil self-weight settlement. Shallow and deep foundations are analyzed, including special articles on laterally loaded piles, retaining structures including MSE and Tieback walls, slope and trench stability for natural, cut and fill slopes, geotechnical uncertainty, and geotechnical LRFD (Load and Resistance Factor Design).