Download or read book Steels Processing Structure and Performance Second Edition written by George Krauss and published by ASM International. This book was released on 2015-03-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.
Download or read book Modeling and Simulation for Material Selection and Mechanical Design written by George E. Totten and published by CRC Press. This book was released on 2003-12-02 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference describes advanced computer modeling and simulation procedures to predict material properties and component design including mechanical properties, microstructural evolution, and materials behavior and performance. The book illustrates the most effective modeling and simulation technologies relating to surface-engineered compounds, fastener design, quenching and tempering during heat treatment, and residual stresses and distortion during forging, casting, and heat treatment. With contributions from internationally recognized experts in the field, it enables researchers to enhance engineering processes and reduce production costs in materials and component development.
Download or read book Decomposition of Austenite by Diffusional Processes written by Metallurgical Society of AIME. Ferrous Metallurgy Committee and published by . This book was released on 1962 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s
Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book The Selected Works of John W Cahn written by W. Craig Carter and published by John Wiley & Sons. This book was released on 2013-10-28 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of 30 selected papers from the work of John W. Cahn. Dr. Cahn is Senior Fellow at the Materials Science and Engineering Laboratory of the National Institute of Standards and Technology, and is widely recognized as a founder of modern theory and thought in materials science. The range of his research included kinetics and mechanisms of metallurgical phase changes, surfaces, interfaces, defects, quasicrystals, thermodynamics, and other areas impacting the fundamental understanding of materials science. Each paper includes a 2-4 page review of the impact and historical perspective of the work. This is an important collection for students, instructors, and scientists interested in materials science.
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.
Download or read book Theory of Transformations in Steels written by Harshad K. D. H. Bhadeshia and published by CRC Press. This book was released on 2021-03-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading authority in the field of solid-state phase transformations, Theory of Transformations in Steels is the first book to provide readers with a complete discussion of the theory of transformations in steel. Offers comprehensive treatment of solid-state transformations, covering the vast number in steels Serves as a single source for almost any aspect of the subject Features discussion of physical properties, thermodynamics, diffusion, and kinetics Covers ferrites, martensite, cementite, carbides, nitrides, substitutionally-alloyed precipitates, and pearlite Contains a thoroughly researched and comprehensive list of references as further and recommended reading With its broad and deep coverage of the subject, this work aims at inspiring research within the field of materials science and metallurgy.
Download or read book Phase Transformations in Metals and Alloys Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 2009-02-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to cover developments in the field over the past 17 years, and now reprinted to correct errors in the prior printing, Phase Transformation in Metals and Alloys, Third Edition provides information and examples that better illustrate the engineering relevance of this topic. It supplies a comprehensive overview of specific types o
Download or read book On the decompositio of austenite in a 13 per cent chromium stee written by Markku Mannerkoski and published by . This book was released on 1964 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Process Modeling Steels written by Cemil Hakan Gur and published by CRC Press. This book was released on 2008-12-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Solid State Physics written by Henry Ehrenreich and published by Elsevier. This book was released on 2006-08-04 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The article by Fulde, Thalmeier and Zwicknagl traces many of the recent developments in the field of strongly correlated many electron systems. It is very useful both as a reference and a pedagogical exposition since it places these developments into a historical context beginning with early developments in the electron theory of solids. The second article in this volume, by Bréchet and Hutchinson, concerns pattern formation in metals and alloys. Spontaneous pattern formation is the development of a regularity, either in the spatial distribution of the material in a system or in its development in time, of a lower symmetry than that of its cause. These phenomena have been of considerable interest to the non-linear physics community, in particular in fluid dynamics and in chemical reactions.- Continuation of prestigious serial - Covers cutting edge research and topics in solid state physics- Studies strongly correlated electron systems and pattern formation in metal and alloys
Download or read book Phase Transformations in Metals and Alloys written by David A. Porter and published by CRC Press. This book was released on 2021-11-07 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses advances in the computation of phase diagrams Offers expanded treatment of eutectic solidification with practical examples and new coverage of ternary phase diagrams, covering the concepts of orthoequilibrium and paraequilibrium Updates discussion of bainite transformation to reflect current opinions Includes new case studies covering grain refiners in aluminium alloys, additive manufacturing, thin film growth, important aerospace Al-Li alloys, and quenched and partitioned steels, and metastable austenitic stainless steels. Each chapter now begins with a list of key concepts, includes simpler illustrative exercises with relevance to real practical applications, and references to scientific publications updated to reflect experimental and computational advances in metallurgy
Download or read book Microstructure of Steels and Cast Irons written by Madeleine Durand-Charre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.
Download or read book The Deformation and Processing of Structural Materials written by Z. X. Guo and published by Elsevier. This book was released on 2005-05-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a good understanding of a construction material's performance under different conditions is essential for helping engineers in selecting the right type of material for a job and for setting design specifications. Keeping abreast of the latest research is an important part of this.The deformation and processing of structural materials is divided into eight chapters, each one exploring a material's processing and deformation behaviour. They also consider how the microstructural composition of materials is affected by processing and what influence this has on its subsequent in situ performance. The materials and behaviours looked at in the chapters include: aluminium and its alloys; magnesium alloys; ferrous alloys; superalloys (Ni-based alloys); semisolid metal (SSM) processing of metallic alloys; plastic deformation of intermetallic alloys; metal matrix composites (MMCs); and fine grain superplasticity in SP materials.The first of its kind to give comprehensive coverage to the subject, The deformation and processing of structural materials is a valuable resource for engineers, researchers in mechanical, civil and structural engineering. - Contains research on the preformance of materials - Valuable resource for researchers in mechanical, civil and structural engineering - Comprehensive coverage to the deformation and processing of all types of structural materials
