Download or read book Decommissioning Mothballing and Revamping written by Mike Briggs and published by IChemE. This book was released on 1997 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: When economic circumstances dictate that a process plant should cease or change production, either temporarily or for good, action must be taken. This book explains the pitfalls in planning to raze a plant to the ground, mothballing it or modifying it to something else.

Download or read book Nuclear Decommissioning written by Michele Laraia and published by Elsevier. This book was released on 2012-02-21 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a nuclear installation has reached the end of its safe and economical operational lifetime, the need for its decommissioning arises. Different strategies can be employed for nuclear decommissioning, based on the evaluation of particular hazards and their attendant risks, as well as on the analysis of costs of clean-up and waste management. This allows for decommissioning either soon after permanent shutdown, or perhaps a long time later, the latter course allowing for radioactivity levels to drop in any activated or contaminated components. It is crucial for clear processes and best practices to be applied in decommissioning such installations and sites, particular where any significant health and environmental risks exist.This book critically reviews the nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities. Part one focuses on the fundamental planning issues in starting a nuclear decommissioning process, from principles and safety regulations, to financing and project management. Part two covers the execution phase of nuclear decommissioning projects, detailing processes and technologies such as dismantling, decontamination, and radioactive waste management, as well as environmental remediation, site clearance and reuse. Finally, part three details international experience in the decommissioning of nuclear applications, including the main nuclear reactor types and nuclear fuel cycle facilities, as well as small nuclear facilities and legacy nuclear waste sites. - Critically reviews nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities - Discusses the fundamental planning issues in starting a nuclear decommissioning process - Considers the execution phase of nuclear decommissioning projects, including dismantling, decontamination, and radioactive waste management, as well as environmental remediation, site clearance and reuse

Download or read book Advances and Innovations in Nuclear Decommissioning written by Michele Laraia and published by Woodhead Publishing. This book was released on 2017-06-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Innovations in Nuclear Decommissioning is an essential resource for industry professionals and academics interested in acquiring the most up-to-date information on the current state of nuclear decommissioning. Written and edited by the world's leading experts, this book considers lessons learned and new innovations in the field. Edited by Dr. Laraia, it is the perfect companion to his 2012 book, Nuclear Decommissioning, which critically reviews the nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities. Where the earlier book covers the basics of decommissioning, this new book brings you up-to-date with new areas of interest and approaches, innovative technologies, and lessons learned by both the nuclear and non-nuclear decommissioning sectors. - Focuses on new aspects, trends and innovative technologies - Includes content on decommissioning after a severe accident, including the use of robotics - Brings together information from around the world and considers the lessons learned from the non-nuclear sector as well

Download or read book Process Plant Commissioning written by D. M. C. Horsley and published by IChemE. This book was released on 1998 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook on the commissioning of all process plants, large and small, has been fully updated and expanded. The aim of the text is to provide the non-specialist with advice on how to set about the problem of commissioning either a new plant or a modification. Some aspects of decommissioning are also included. The section on legislation has been expanded and updated to cover all areas of safety, health and environment.

Download or read book Project Management for the Process Industries written by Gillian Lawson and published by IChemE. This book was released on 1999 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry is dependent on projects to develop new and improved products and processes for producing them, necessitating the need for them to be completed right first time and on time. Objectives, safety, environmental awareness, quality, cost and speed are all things which need to be considered when implementing a project, which is why process plants have project managers/engineers. This book is aimed at everyone who has responsibilities for some or all of a project, giving a better understanding of the subject. It describes best practice and offers guidance on how principles and techniques can be applied to all aspects of a projects. This information is presented in chapters arranged in three sections: phases of a project; tools and techniques relevant at every stage; and skills and knowledge required by the project manager.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Management of Process Industry Waste written by Richard Bahu and published by IChemE. This book was released on 1997 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Monitoring and Control of Fermenters written by Gary Montague and published by IChemE. This book was released on 1997 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the state-of-the-art in industrial fermentation monitoring and control. The main aim of the report is to encourage industry to take up methodologies suggested by research. It draws its conclusions from a one-year study into issues such as: improving data analysis procedures and monitoring techniques; applying estimation methods to enhance on-line information; easing the task of establishing effective closed-loop control systems; utilizing artificial intelligence techniques to improve process fault detection and diagnosis and provide general operator assistance; using optimization approaches where possible to enhance bioprocess profitability from development laboratory scale to large-scale production.

Download or read book Strategies for Effective Maintenance written by Mike Briggs and published by IChemE. This book was released on 2000 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide sets out the underlying principles for effective maintenance, then provides decision aids and logic flow diagrams to help readers arrive at appropriate conclusions for their own situation.

Download or read book Handling Uncertainty written by Mike Briggs and published by IChemE. This book was released on 2003 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acting as a wide-ranging guide for young professionals and a source of reference for managers, this title deals with the subject of uncertainty in the process industries and related fields, in a practical and positive way. It demonstrates how to recognize key features and handle different situations effectively, illustrating the principles for effective action with examples from the author's experience in the process industries.

Download or read book Chemical Engineering Design Project written by Martyn S Ray and published by CRC Press. This book was released on 2020-08-12 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition follows the original format, which combines a detailed case study - the production of phthalic anhydride - with practical advice and comprehensive background information. Guiding the reader through all major aspects of a chemical engineering design, the text includes both the initial technical and economic feasibility study as well as the detailed design stages. Each aspect of the design is illustrated with material from an award-winning student design project. The book embodies the "learning by doing" approach to design. The student is directed to appropriate information sources and is encouraged to make decisions at each stage of the design process rather than simply following a design method. Thoroughly revised, updated, and expanded, the accompanying text includes developments in important areas and many new references.

Download or read book Waste Management and Minimization written by Stephen R. Smith and published by EOLSS Publications. This book was released on 2009-09-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Management and Minimization theme is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The book on Waste Management and Minimization contains contributions from distinguished experts in the field, discusses waste treatment, management and minimization. This volume is aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.

Download or read book Reclamation of Contaminated Land written by C. Paul Nathanail and published by John Wiley & Sons. This book was released on 2005-09-27 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Land contamination is of global concern with many of the world’s industries potentially harming the environment and human health. Along with rapidly changing policy and technological developments, this is an interdisciplinary area in which successful contaminated land management depends on the expertise of and interaction between a number of scientific and engineering disciplines. Reclamation of Contaminated Land takes into account the different groups involved in contaminated land management and offers a flexible learning approach based on practical experience and research. It presents an overview of the general skills and knowledge required, encompassing both general management and regulatory practice and specific land contamination issues. Divided into two parts, Part I discusses site characterisation and the design of site investigations, and the central role of conceptual models and risk assessment in decision making. Part II discusses how risks from contaminated land are managed and the role of different remediation approaches to achieving this. This book is of great value for 2nd/3rd/4th year undergraduates and MSc students in Environmental Science, Environmental Technology, Environmental Management, Geography, Geology, Estate and Land Management. It is also key reading for undergraduates and MSc students in Chemical Engineering, Civil & Environmental Engineering and Environmental Chemistry, as well as professional planners and developers, and local authorities.

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

Download or read book The Chemical Engineer written by and published by . This book was released on 1998 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Decommissioning Handbook written by Anibal Taboas and published by . This book was released on 2004 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry and Industry written by and published by . This book was released on 1997 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: