Download or read book Decay Heat Calculations for PWR and BWR Assemblies Fueled with Uranium and Plutonium Mixed Oxide Fuel Using SCALE written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In currently operating commercial nuclear power plants (NPP), there are two main types of nuclear fuel, low enriched uranium (LEU) fuel, and mixed-oxide uranium-plutonium (MOX) fuel. The LEU fuel is made of pure uranium dioxide (UO2 or UOX) and has been the fuel of choice in commercial light water reactors (LWRs) for a number of years. Naturally occurring uranium contains a mixture of different uranium isotopes, primarily, 235U and 238U. 235U is a fissile isotope, and will readily undergo a fission reaction upon interaction with a thermal neutron. 235U has an isotopic concentration of 0.71% in naturally occurring uranium. For most reactors to maintain a fission chain reaction, the natural isotopic concentration of 235U must be increased (enriched) to a level greater than 0.71%. Modern nuclear reactor fuel assemblies contain a number of fuel pins potentially having different 235U enrichments varying from ≈2.0% to ≈5% enriched in 235U. Currently in the United States (US), all commercial nuclear power plants use UO2 fuel. In the rest of the world, UO2 fuel is still commonly used, but MOX fuel is also used in a number of reactors. MOX fuel contains a mixture of both UO2 and PuO2. Because the plutonium provides the fissile content of the fuel, the uranium used in MOX is either natural or depleted uranium. PuO2 is added to effectively replace the fissile content of 235U so that the level of fissile content is sufficiently high to maintain the chain reaction in an LWR. Both reactor-grade and weapons-grade plutonium contains a number of fissile and non-fissile plutonium isotopes, with the fraction of fissile and non-fissile plutonium isotopes being dependent on the source of the plutonium. While only RG plutonium is currently used in MOX, there is the possibility that WG plutonium from dismantled weapons will be used to make MOX for use in US reactors. Reactor-grade plutonium in MOX fuel is generally obtained from reprocessed irradiated nuclear fuel, whereas weapons-grade plutonium is obtained from decommissioned nuclear weapons material and thus has a different plutonium (and other actinides) concentration. Using MOX fuel instead of UOX fuel has potential impacts on the neutronic performance of the nuclear fuel and the design of the nuclear fuel must take these differences into account. Each of the plutonium sources (RG and WG) has different implications on the neutronic behavior of the fuel because each contains a different blend of plutonium nuclides. The amount of heat and the number of neutrons produced from fission of plutonium nuclides is different from fission of 235U. These differences in UOX and MOX do not end at discharge of the fuel from the reactor core - the short- and long-term storage of MOX fuel may have different requirements than UOX fuel because of the different discharged fuel decay heat characteristics. The research documented in this report compares MOX and UOX fuel during storage and disposal of the fuel by comparing decay heat rates for typical pressurized water reactor (PWR) and boiling water reactor (BWR) fuel assemblies with and without weapons-grade (WG) and reactor-grade (RG) MOX fuel.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1965 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thorium Fuel Cycle written by International Atomic Energy Agency and published by . This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a critical review of the thorium fuel cycle: potential benefits and challenges in the thorium fuel cycle, mainly based on the latest developments at the front end of the fuel cycle, applying thorium fuel cycle options, and at the back end of the thorium fuel cycle.
Download or read book Transactions of the American Nuclear Society written by American Nuclear Society and published by . This book was released on 1974 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management of Recyclable Fissile and Fertile Materials written by and published by . This book was released on 2007 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in nuclear energy continues to grow in many countries as a means to ensure security of energy supply and to limit greenhouse gas emissions from the power sector. In this context, recyclable materials constitute an asset for broadening the resource base for nuclear fuel supply, especially in medium- and long-term perspectives. This report provides an overview of recyclable fissile and fertile materials inventories which can be reused as nuclear fuel. It reviews the options available for managing those materials, through recycling and/or disposal. The potential energetic value of recyclable materials is assessed, taking into account the variability of retrievable energy contents of various materials according to technology and strategy choices made by the owners of the materials. The analyses contained in this report will be of particular interest to energy policy makers and to nuclear fuel cycle experts. Also available in this series: Innovation in Nuclear Energy Technology (2007) Forty Years of Uranium Resources, Production and Demand in Perspective: The Red Book Retrospective (2006) Nuclear Power Plant Life Management and Longer-term Operation (2006)
Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants
Download or read book Nuclear Energy written by Nicholas Tsoulfanidis and published by Springer Science & Business Media. This book was released on 2012-12-12 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Energy provides an authoritative reference on all aspects of the nuclear industry from fundamental reactor physics calculations to reactor design, nuclear fuel resources, nuclear fuel cycle, radiation detection and protection, and nuclear power economics. Featuring 19 peer-reviewed entries by recognized authorities in the field, this book provides comprehensive, streamlined coverage of fundamentals, current areas of research, and goals for the future. The chapters will appeal to undergraduate and graduate students, researchers, and energy industry experts.
Download or read book Safeguards Techniques and Equipment written by International Atomic Energy Agency and published by . This book was released on 2011 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1990s saw significant developments in the global non-proliferation landscape, resulting in a new period of safeguards development. The current publication, which is the second revision and update of IAEA/NVS/1, is intended to give a full and balanced description of the safeguards techniques and equipment used for nuclear material accountancy, containment and surveillance measures, environmental sampling, and data security. New features include a section on new and novel technologies. As new verification measures continue to be developed, the material in this book will be reviewed periodically and updated versions issued.
Download or read book Nuclear Fuel Cycle Science and Engineering written by Ian Crossland and published by Elsevier. This book was released on 2012-09-21 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field.Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management.With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field. - Provides a comprehensive and holistic review of the complete nuclear fuel cycle - Reviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysis - Discusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication
Download or read book Storage and Hybridization of Nuclear Energy written by Hitesh Bindra and published by Academic Press. This book was released on 2018-11-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Storage and Hybridization of Nuclear Energy: Techno-economic Integration of Renewable and Nuclear Energy provides a unique analysis of the storage and hybridization of nuclear and renewable energy. Editor Bindra and his team of expert contributors present various global methodologies to obtain the techno-economic feasibility of the integration of storage or hybrid cycles in nuclear power plants. Aimed at those studying, researching and working in the nuclear engineering field, this book offers nuclear reactor technology vendors, nuclear utilities workers and regulatory commissioners a very unique resource on how to access reliable, flexible and clean energy from variable-generation. - Presents a unique view on the technologies and systems available to integrate renewables and nuclear energy - Provides insights into the different methodologies and technologies currently available for the storage of energy - Includes case studies from well-known experts working on specific integration concepts around the world
Download or read book The Technological and Economic Future of Nuclear Power written by Reinhard Haas and published by Springer. This book was released on 2019-04-26 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book discusses the eroding economics of nuclear power for electricity generation as well as technical, legal, and political acceptance issues. The use of nuclear power for electricity generation is still a heavily disputed issue. Aside from technical risks, safety issues, and the unsolved problem of nuclear waste disposal, the economic performance is currently a major barrier. In recent years, the costs have skyrocketed especially in the European countries and North America. At the same time, the costs of alternatives such as photovoltaics and wind power have significantly decreased.
Download or read book The Safety of Nuclear Power Reactors light Water cooled and Related Facilities written by U.S. Atomic Energy Commission and published by . This book was released on 1973 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BWR Source Term Generation and Evaluation written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This calculation is a revision of a previous calculation (Ref. 7.5) that bears the same title and has the document identifier BBAC00000-01717-0210-00006 REV 01. The purpose of this revision is to remove TBV (to-be-verified) -41 10 associated with the output files of the previous version (Ref. 7.30). The purpose of this and the previous calculation is to generate source terms for a representative boiling water reactor (BWR) spent nuclear fuel (SNF) assembly for the first one million years after the SNF is discharged from the reactors. This calculation includes an examination of several ways to represent BWR assemblies and operating conditions in SAS2H in order to quantify the effects these representations may have on source terms. These source terms provide information characterizing the neutron and gamma spectra in particles per second, the decay heat in watts, and radionuclide inventories in curies. Source terms are generated for a range of burnups and enrichments (see Table 2) that are representative of the waste stream and stainless steel (SS) clad assemblies. During this revision, it was determined that the burnups used for the computer runs of the previous revision were actually about 1.7% less than the stated, or nominal, burnups. See Section 6.6 for a discussion of how to account for this effect before using any source terms from this calculation. The source term due to the activation of corrosion products deposited on the surfaces of the assembly from the coolant is also calculated. The results of this calculation support many areas of the Monitored Geologic Repository (MGR), which include thermal evaluation, radiation dose determination, radiological safety analyses, surface and subsurface facility designs, and total system performance assessment. This includes MGR items classified as Quality Level 1, for example, the Uncanistered Spent Nuclear Fuel Disposal Container (Ref. 7.27, page 7). Therefore, this calculation is subject to the requirements of the Quality Assurance Requirements and Description (Ref. 7.28). The performance of the calculation and development of this document are carried out in accordance with AP-3.124, ''Design Calculation and Analyses'' (Ref. 7.29).
Download or read book Radiological Characterization of Shut Down Nuclear Reactors for Decommissioning Purposes written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes and assesses radiological characterization as a precursor to decommissioning. It shows the influence of the radioactive inventory on the planning and strategies of decommissioning and also presents an extensive overview of characterization results on various reactors which have been or are being decommissioned.
Download or read book Nuclear Energy Today written by OECD Nuclear Energy Agency and published by OECD. This book was released on 2003 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: As energy demand increases in line with the expansion of the world's leading economies and the growth of developing economies, a key challenge remains of how to provide the energy levels required while protecting our environment and conserving natural resources. Nuclear energy is a complex and controversial technology but also has the potential to provide considerable benefits. This publication explores a range of issues involved in the use of nuclear energy, including safety aspects, whether its use is economically competitive, its role in meeting greenhouse gas reduction targets, how to manage the radioactive waste it generates, whether its use increase the risk of proliferation of nuclear weapons, security of resources, and its potential role in the future.
